Photocurrent Enhancement in Si-Ge Photodetectors by Utilizing Surface Plasmons

A circular slit-groove surface plasmon polaritons (SPPs) launcher surrounding a photodetector is employed theoretically to enhance the photocurrent of atypical Si-Ge photodetectors. The slit and grooves are designed such that the SPPs are focused at the center of the absorption layer of the photodetector to result in additional electric current. Fabry–Perot resonance condition accurately calculates the period of the groove, slit-groove distance, photodetector radius, and slit-photodetector distance. The manipulation leads to constructive interference between the incident light impinging from the top and the SPPs propagating toward the photodetector. Simulation result shows that photocurrent increases by approximately 13-fold when the SPPs are introduced.     

Sampling Time and Performance in Rat Whisker Sensory System

We designed a behavioural paradigm for vibro-tactile detection to characterise the sampling time and performance in the rat whisker sensory system. Rats initiated a trial by nose-poking into an aperture where their whiskers came into contact with two meshes. A continuous nose-poke for a random duration triggered stimulus presentation. Stimuli were a sequence of discrete Gaussian deflections of the mesh that increased in amplitude over time – across 5 conditions, time to maximum amplitude varied from 0.5 to 8 seconds. Rats indicated the detected stimulus by choosing between two reward spouts. Two rats completed more than 500 trials per condition. Rats'' stimulus sampling duration increased and performance dropped with increasing task difficulty. For all conditions the median reaction time was longer for correct trials than incorrect trials. Higher rates of increment in stimulus amplitude resulted in faster rise in performance as a function of stimulus sampling duration. Rats'' behaviour indicated a dynamic stimulus sampling whereby nose-poke was maintained until a stimulus was correctly identified or the rat experienced a false alarm. The perception was then manifested in behaviour after a motor delay. We thus modelled the results with 3 parameters: signal detection, false alarm, and motor delay. The model captured the main features of the data and produced parameter estimates that were biologically plausible and highly similar across the two rats.     

Influence of synthesis parameters on the optical and photocatalytic properties of solvo/hydrothermal CuS and ZnS nanoparticles

Copper sulfide and zinc sulfide nanostructures were synthesized using a solvo/hydrothermal method and a thio Schiff base ligand, N‐benzylidene ethanethioamide, as a source of sulfide ions. The effects of different synthesis parameters including the type of solvent, temperature, and duration of reactions on the morphology of the CuS and ZnS products were investigated using field emission scanning microscopy and transmission electron microscopy, respectively. The structural aspects of the samples were characterized using powder X‐ray diffraction, Fourier transform infrared spectroscopy, and energy dispersive X‐ray analysis. The optical properties of the samples were studied through their optical absorption and photoluminescence spectra. The photocatalytic ability of the as‐synthesized sulfides was explored by studying the colour removal of methylene blue under ultraviolet light irradiation.     

Cytotoxicity of doxrubicin loaded single-walled carbon nanotubes

Carbon nanotube (CNTs) is a new alternative for efficient drug delivery and it has a great potential to change drug delivery system profile in pharmaceutical industry. One of the important advantage of CNTs is their needle-like, cylindrical shape. This shape provides a high surface area for multiple connections and adsorption onto for millions of therapeutic molecules. CNTs can be internalized by cells via endocytosis, passive diffusion and phagocytosis and release the drug with different effects like pH and temperature. The acidic nature of cancer cells and the susceptibility of CNTs to release the drug in the acidic environment have made it a promising area of research in cancer drug delivery. In this research, we investigated cell viability, cytotoxicity and drug delivery in breast cancer cell line by designing non-covalent single walled carbon nanotubes (SWNT)–doxorubicin (DOX) supramolecular complex that can be developed for cancer therapy. Applied high concentrations of DOX loaded SWNTs changed the actin structure of the cells and prevented the proliferation of the cells. It was showed that doxorubicin loaded SWNTs were more effective than free doxorubicin at relatively small concentrations. Once we applied same procedure for short and long (short: 1–1.3 µm; long: 2.5–4 µm) SWNTs and compared the results, more disrupted cell structure and reduction in cell proliferation were observed for long CNTs. DOX is bounded more to nanotubes in basic medium, less bound in acidic environment. Cancer cells were also examined for concentration at which they were effective by applying DOX and it was seen that 3.68 µM doxorubicin kills more than 55% of the cells.     

Investigation of CTLA‐4 and CD86 gene polymorphisms in Iranian patients with brucellosis infection

The protective immune response against Brucella involves T‐cell‐mediated immunity. T‐lymphocyte receptors, CD28 and cytotoxic T‐lymphocyte‐associated protein‐4 (CTLA‐4), bind the same ligands, CD80 (B7‐1) and CD86 (B7‐2) on antigen‐presenting cells and regulate T cell activation. CD28 delivers stimulatory signals whereas CTLA‐4 provides inhibitory signals for T cell activation. Here, we investigated the association of four polymorphisms in CTLA4 (+49A/G [rs231775] and ?318 C/T [rs5742909]) and its ligand CD86 (+1057 G/A [rs1129055] and +2379G/C [rs17281995]) with brucellosis infection. The study included 153 Iranian patients with active brucellosis and 128 healthy individuals as the control group. Genotyping of the CTLA4 and CD86 variants was performed using tetra amplification refractory mutation system‐polymerase chain reaction (T‐ARMS‐PCR) and PCR–restriction fragment length polymorphism analysis, respectively. It was found that the CTLA4 ?318 CT genotype and T allele were present more frequently in cases than in controls and are therefore associated with an increased risk for brucellosis (?318 TT genotype; OR = 2.544, P = 0.002). Likewise, the CD86 +1057 GA and AA genotypes and A allele were associated with an increased risk of brucellosis (+1057 AA genotype; OR = 3.81, P = 0.001). However, no statistically significant difference between brucellosis patients and controls in the allele and genotype distributions of CTLA4, +49A/G (P = 0.859) and CD86, +2379G/C (P = 0.476) was found. In conclusion, CTLA4 ?318 CT genotype and T allele and the CD86 +057 GA and AA genotypes and A allele play roles as risk factors for developing brucellosis infection in Iran.

     

Prominence of three diets on life table parameters for Chrysoperla carnea (Neuroptera: Chrysopidae) to mass rearing under laboratory conditions

Chrysoperla carnea (Steph.) is a general predator reared in industrial scale. Different eggs of moth were used to rear C. carnea, but stabled moth colony needed expensive equipment and is costly. In this research, we surveyed appropriate diet to mass rearing. For this purpose, 100 same old (24H) eggs of C. carnea, separately, were selected randomly from the mass culture of C. carnea which was reared on the egg of flour moth Anagasta kuehniella (Zeller), artificial diet and semi-artificial diet under laboratory conditions (25 ± 5°C, 65 ± 5% RH and L–D: 16–8). These results showed reduction process e_x (expectation of life table at age X) and the survival curve was convex (K-Strategy). Also L_x in appearing of adults that fed on egg of flour moth, artificial diet and semi-artificial diet were 0.76, 0.4 and 0.9 which implied that 24, 60 and 10% of cohort were dead before reaching adult stage. Eggs produced by each female were recorded daily until all females died. The parameters were estimated using Carey’s (1993) method. Gross (GRR) and net (R₀) reproductive rates of predator on A. kuehniella, artificial diet and semi artificial diets were 225.5 ± 3.45, 72.4 ± 3.5, 267.8 ± 4.8 and 180.12 ± 2.3, 24.33 ± 4.3, 254.05+3.3 (female/female/generation), respectively. Mean generation time (T), Doubling time (DT), Intrinsic rate of increase (r_m ) and Finite rate of increase (λ) of predator on A. kuehniella, artificial diet and semi artificial diet were 31.9 ± 0.71, 42.87 ± 0.45, 29.79 ± 0.57 (days); 4.27 ± 0.03, 9.36 ± 0.06, 3.74 ± 0.05 (days); 0.162 ± 0.001, 0.074 ± 0.003, 1.185 ± 0.002; and 1.175 ± 0.001, 1.076 ± 0.002, 1.203 ± 0.002 (female/female/day), respectively. This research indicated that semi-artificial diet is a suitable prey for the predator.     

First report of a bifunctional chitinase/lysozyme produced by Bacillus pumilus SG2

Bacillus pumilus SG2 isolated from high salinity ecosystem in Iran produces two chitinases (ChiS and ChiL) and secretes them into the medium. In this study, chiS and chiL genes were cloned in pQE-30 expression vector and were expressed in the cytoplasm of Escherichia coli strain M15. The recombinant proteins were purified using Ni-NTA column. The optimum pH and optimum temperature for enzyme activity of ChiS were pH 6, 50°C; those of ChiL were pH 6.5, 40°C. The purified chitinases showed antifungal activity against Fusarium graminearum, Rhizoctonia solani, Magnaporthe grisea, Sclerotinia sclerotiorum, Trichoderma reesei, Botrytis cinerea and Bipolaris sp. Moreover, purified ChiS was identified as chitinase/lysozyme, which are capable of degrading the chitin component of fungal cell walls and the peptidoglycan component of cell walls with many kinds of bacteria (Xanthomonas translucens pv. hordei, Xanthomonas axonopodis pv. citri, Bacillus licheniformis, E. coli C600, E. coli TOP10, Pseudomonas aeruginosa and Pseudomonas putida). Strong homology was found between the three-dimensional structures of ChiS and a chitinase/lysozyme from Bacillus circulans WL-12. This is the first report of a bifunctional chitinase/lysozyme from B. pumilus.     

Temperament and character in cross-cultural comparisons between Swedish and Iranian people and Iranian refugees in Sweden--personality in transition?

The aim of the study was a cross-cultural comparison of personality traits between individuals from two very different cultures and refugees who resettled several years before from one to the other. Four hundred forty four Swedish individuals of the normal population; and 100 Iranian refugees in Sweden, and a group of 335 individuals from Tehran, capital of Iran, were investigated by means of the Temperament and Character Inventory, a questionnaire to assess temperament and character Iranians are those that are most frequently correctly classified followed by the Swedish based on temperament scores by means of a Discriminance analyses. Iranian refugees in Sweden were classified to about 50 per cent as Swedish and to slightly more then one-third as Iranians. Especially concerning character, 4 per cent only could be correctly classified as refugees. The results give some perspective on the adaptation process and personality changes in refugees several years after resettlement in another country with a complete different culture.