Effects of noncovalent and covalent FAD binding on the redox and catalytic properties of p-cresol methylhydroxylase

Each flavoprotein subunit (alpha or PchF) of the alpha(2)beta(2) flavocytochrome p-cresol methylhydroxylase (PCMH) from Pseudomonas putida contains FAD covalently attached to Tyr384. PCMH oxidizes p-cresol to 4-hydroxybenzyl alcohol, which is oxidized subsequently by PCMH to 4-hydroxybenzaldehyde. The Y384F mutant form of PchF (apo-PchF[Y384F]) displayed stoichiometric noncovalent FAD binding. PchF[Y384F]FAD associated with the cytochrome subunit (beta or PchC) (producing PCMH[Y384F]), although not as avidly as with wild-type PchF containing covalently bound FAD (PchF(C)). Dramatic increases in the two-electron E(m,7) (NHE) values for FAD were observed when it bound noncovalently to either apo-PchF or apo-PchF[Y384F], and the two-electron E(m,7) value for FAD was increased further by about 75 mV upon covalent binding to PchF, i.e., PchF(C). The E(m,7) values increased by approximately 20 and 45 mV, respectively, when PchF(C) and PchF[Y384F]FAD associated with PchC. The two-electron E(m,7) for covalently bound FAD in PCMH is 84 mV, the highest measured for a flavoprotein. The values for the one-electron redox potentials (E(m,7), NHE) for FAD were measured also for various forms of PchF. Under anaerobiosis, the reduction of PchF[Y384F]FAD by substrates was similar to that observed previously for PchF containing noncovalently bound FAD. Stopped-flow kinetic studies indicated a rapid substrate reduction of the FAD and heme in PCMH[Y384F] which produced PchF[Y384F]FAD(rad) x PchC, the mutant enzyme containing the flavin radical and reduced heme. These experiments also revealed a slow reduction of unassociated PchC(ox) by PchF[Y384F]FAD(rad) x PchC. Steady-state kinetic studies of the reaction of PCMH[Y384F] with p-cresol indicated that the K(m) for this substrate was unchanged relative to that of PCMH, but that the k(cat) was diminished by an order of magnitude. The data indicate that the covalent attachment of FAD to PchF assists catalysis by raising the E(m,7) of the flavin. Contributions to this effect likely result from conformational changes.     

Mathematical analysis of mural thrombogenesis. Concentration profiles of platelet-activating agents and effects of viscous shear flow.

The concentration profiles of adenosine diphosphate (ADP), thromboxane A2 (TxA2), thrombin, and von Willebrand factor (vWF) released extracellularly from the platelet granules or produced metabolically on the platelet membrane during thrombus growth, were estimated using finite element simulation of blood flow over model thrombi of various shapes and dimensions. The wall fluxes of these platelet-activating agents were estimated for each model thrombus at three different wall shear rates (100 s-1, 800 s-1, and 1,500 s-1), employing experimental data on thrombus growth rates and sizes. For that purpose, whole human blood was perfused in a parallel-plate flow chamber coated with type l fibrillar human collagen, and the kinetic data collected and analyzed by an EPl-fluorescence video microscopy system and a digital image processor. It was found that thrombin concentrations were large enough to cause irreversible platelet aggregation. Although heparin significantly accelerated thrombin inhibition by antithrombin lll, the remaining thrombin levels were still significantly above the minimum threshold required for irreversible platelet aggregation. While ADP concentrations were large enough to cause irreversible platelet aggregation at low shear rates and for small aggregate sizes, TxA2 concentrations were only sufficient to induce platelet shape change over the entire range of wall shear rates and thrombi dimensions studied. Our results also indicated that the local concentration of vWF multimers released from the platelet alpha-granules could be sufficient to modulate platelet aggregation at low and intermediate wall shear rates (less than 1,000 s-1). The sizes of standing vortices formed adjacent to a growing aggregate and the embolizing stresses and the torque, acting at the aggregate surface, were also estimated in this simulation. It was found that standing vortices developed on both sides of the thrombus even at low wall shear rates. Their sizes increased with thrombus size and wall shear rate, and were largely dependent upon thrombus geometry. The experimental observation that platelet aggregation occurred predominantly in the spaces between adjacent thrombi, confirmed the numerical prediction that those standing vortices are regions of reduced fluid velocities and high concentrations of platelet-activating substances, capable of trapping and stimulating platelets for aggregation. The average shear stress and normal stress, as well as the torque, acting to detach the thrombus, increased with increasing wall shear rate. Both stresses were found to be nearly independent of thrombus size and only weekly dependent upon thrombus geometry. Although both stresses had similar values at low wall shear rates, the average shear stress became the predominant embolizing stress at high wall shear rates.     

A rapid and effecient method for the isolation of proteins from polyacrylamide cells.

A procedure is described for the rapid and efficient electrophoretic elution of protein from polyacrylamide gels which is then collected in a dialysis bag tied to the end of a tube containing the gel slices. To illustrate the method a heterogeneous preparation of alkaline phosphatase was used from which a single homogeneous component was isolated in six hours with a recovery of 86%. The eluted protein is collected in a volume which can easily be kept below 1.5 ml, thus eliminating the need for subsequent concentration. The method has also been used successfully in two other systems in which a human lung tumor-associated antigen and glycogen synthetase from yeast were isolated. Since the method utilizes a standard analytical gel electrophoresis apparatus with no modifications or accessories, it should be immediately applicable for the isolation of many different proteins from polyacrylamide gels.     

A scaleable manufacturing process for pro-EP-B2, a cysteine protease from barley indicated for celiac sprue

Celiac Sprue is an inflammatory disease of the small intestine triggered by ingestion of dietary gluten, a family of glutamine and proline rich proteins found in common foodgrains such as wheat, rye, and barley. One potential therapy for this lifelong disease anticipates using an oral protease to detoxify gluten in vivo. Recent studies have shown that EP-B2 (endoprotease B, isoform 2) from barley is a promising example of such a glutenase, thus warranting its large-scale production for animal safety and human clinical studies. Here we describe a scaleable fermentation, refolding and purification process for the production of gram to kilogram quantities of pro-EP-B2 (zymogen form of EP-B2) in a lyophilized form. A fed-batch E. coli fermentation system was developed that yields 0.3-0.5 g purified recombinant protein per liter culture volume. Intracellular degradation of pro-EP-B2 during the fermentation was overcome by manipulating the fermentation temperature and duration of protein expression. A simple refolding protocol was developed using a fast dilution method to refold the enzyme at concentrations greater than 0.5 mg/mL. Kinetic analysis showed that pro-EP-B2 refolding is a first-order reaction with an estimated rate constant of 0.15 h(-1). A lyophilization procedure was developed that yielded protein with 85% recoverable activity after 7 weeks of storage at room temperature. The process was successfully scaled up to 100 L with comparable purity and recovery.     

Structures of the flavocytochrome p-cresol methylhydroxylase and its enzyme-substrate complex: gated substrate entry and proton relays support the proposed catalytic mechanism

The degradation of the toxic phenol p-cresol by Pseudomonas bacteria occurs by way of the protocatechuate metabolic pathway. The first enzyme in this pathway, p-cresol methylhydroxylase (PCMH), is a flavocytochrome c. The enzyme first catalyzes the oxidation of p-cresol to p-hydroxybenzyl alcohol, utilizing one atom of oxygen derived from water, and yielding one molecule of reduced FAD. The reducing electron equivalents are then passed one at a time from the flavin cofactor to the heme cofactor by intramolecular electron transfer, and subsequently to cytochrome oxidase within the periplasmic membrane via one or more soluble electron carrier proteins. The product, p-hydroxybenzyl alcohol, can also be oxidized by PCMH to yield p-hydroxybenzaldehyde. The fully refined X-ray crystal structure of PCMH in the native state has been obtained at 2. 5 A resolution on the basis of the gene sequence. The structure of the enzyme-substrate complex has also been refined, at 2.75 A resolution, and reveals significant conformational changes in the active site upon substrate binding. The active site for substrate oxidation is deeply buried in the interior of the PCMH molecule. A route for substrate access to the site has been identified and is shown to be governed by a swinging-gate mechanism. Two possible proton transfer pathways, that may assist in activating the substrate for nucleophilic attack and in removal of protons generated during the reaction, have been revealed. Hydrogen bonding interactions between the flavoprotein and cytochrome subunits that stabilize the intramolecular complex and may contribute to the electron transfer process have been identified.     

NetLogoR: a package to build and run spatially explicit agent‐based models in R

NetLogoR is an R package to build and run spatially explicit agent‐based models (SE‐ABMs) using the R language. SE‐ABMs are models that simulate the fate of entities at the individual level within a spatial context and where patterns emerge at the population level. NetLogoR follows the same framework as the NetLogo software (Wilensky 1999). Rather than a call function to use the NetLogo software, NetLogoR is a translation into the R language of the structure and functions of NetLogo. Models built with NetLogoR are written in R language and are run on the R platform; no other software or language has to be involved. NetLogoR provides new R classes to define model agent objects and functions to implement spatially explicit agent‐based models in the R environment. Users of this package benefit from the fast and easy coding provided by the highly developed NetLogo framework, coupled with the versatility, power and massive resources of the R language.     

Atomic force microscopy of a hybrid high-molecular-weight glutenin subunit from a transgenic hexaploid wheat

The high-molecular-weight glutenin subunits (HMW-GS) of wheat gluten in their native form are incorporated into an intermolecularly disulfide-linked, polymeric system that gives rise to the elasticity of wheat flour doughs. These protein subunits range in molecular weight from about 70 K-90 K and are made up of small N-terminal and C-terminal domains and a large central domain that consists of repeating sequences rich in glutamine, proline, and glycine. The cysteines involved in forming intra- and intermolecular disulfide bonds are found in, or close to, the N- and C-terminal domains. A model has been proposed in which the repeating sequence domain of the HMW-GS forms a rod-like beta-spiral with length near 50 nm and diameter near 2 nm. We have sought to examine this model by using noncontact atomic force microscopy (NCAFM) to image a hybrid HMW-GS in which the N-terminal domain of subunit Dy10 has replaced the N-terminal domain of subunit Dx5. This hybrid subunit, coded by a transgene overexpressed in transgenic wheat, has the unusual characteristic of forming, in vivo, not only polymeric forms, but also a monomer in which a single disulfide bond links the C-terminal domain to the N-terminal domain, replacing the two intermolecular disulfide bonds normally formed by the corresponding cysteine side chains. No such monomeric subunits have been observed in normal wheat lines, only polymeric forms. NCAFM of the native, unreduced 93 K monomer showed fibrils of varying lengths but a length of about 110 nm was particularly noticeable whereas the reduced form showed rod-like structures with a length of about 300 nm or greater. The 110 nm fibrils may represent the length of the disulfide-linked monomer, in which case they would not be in accord with the beta-spiral model, but would favor a more extended conformation for the polypeptide chain, possibly polyproline II.     

Inhibition of murine N1-acetylated polyamine oxidase by an acetylenic amine and the allenic amine, MDL 72527

Murine N¹-acetylated polyamine oxidase (mPAO) was treated with N,N′-bis-(prop-2-ynyl)-1,4-diaminobutane, a poor substrate and inhibitor for the enzyme, with K_m and K_i values in the millimolar range. Apparently, its oxidation produces prop-2-ynal, which reacts with amino acyl nucleophiles. Using a steady-state kinetic assay, four phases were identified, the first being the oxidation of the compound via Michealis-Menten-type kinetics. As prop-2-ynal accumulates, there is a biphasic reduction in the rate. This process leads to an mPAO form that is nearly inactive (fourth phase), but displays classical Michealis-Menten-type kinetics. The enzyme-bound flavin is not modified in this process. In contrast, micromolar concentrations of the MDL 72527 (N,N′-bis-[buta-2,3-dienyl]-1,4-diaminobutane) inhibited mPAO rapidly and completely. It inhibits by first binding tightly and apparently irreversibly, and then slowly converts to a species where the inhibitor is covalently bound to the N5-position of the flavin’s isoalloxazine ring. The covalent adduct was identified as a flavocyanine.