Resonance Raman study of halorhodopsin photocycle kinetics, chromophore structure, and chloride-pumping mechanism.

Kinetic resonance Raman spectra of the HR520, HR640, and HR578 species in the halorhodopsin photocycle are obtained using time delays ranging from 5 microseconds to 10 ms in 0.3 M NO3-, 0.3 M Cl-, and 3 M Cl-. The Raman intensities are converted to absolute concentrations by using a conservation of molecules constraint. The simplest kinetic scheme that satisfactorily models the data is HR578-->HR520 in equilibrium with HR640-->HR578. The rate constant for the HR640-->HR578 transition increases with Cl- concentration, suggesting that Cl- is taken up between HR640 and HR578. The ratio of the forward to the reverse rate constants connecting HR520 and HR640 increases as the inverse of the Cl- concentration, suggesting that Cl- is released during the HR520-->HR640 step. The configuration about the C13 = C14 bond of the retinal chromophore in HR640 is examined by regenerating the protein with [12,14-2H2]retinal. The C12-2H + C14-2H rocking vibration for HR640 is observed at 943 cm-1, demonstrating that the chromophore is 13-cis. The changes in the resonance Raman spectrum of HR640 in response to 2H2O suspension indicates that the Schiff base linkage to the protein is protonated. None of the HR640 fingerprint vibrations shift significantly in 2H2O, suggesting that the Schiff base adopts a C = N anti configuration; this assignment is supported by the frequency of the C15-2H rocking mode (1002 cm-1). The 13-cis structure for the chromophore in HR640 requires that thermal isomerization back to all-trans occurs in the HR640-->HR578 transition. These structural and kinetic results are incorporated into a two-state C-T model for Cl- pumping.     

Mitochondrial DNA differentiation during the speciation process in Peromyscus

We address the problem of the possible significance of biological speciation to the magnitude and pattern of divergence of asexually transmitted characters in bisexual species. The empirical data for this report consist of restriction endonuclease site variability in maternally transmitted mitochondrial DNA (mtDNA) isolated from 82 samples of Peromyscus polionotus and P. leucopus collected from major portions of the respective species' ranges. Data are analyzed together with previously published information on P. maniculatus, a sibling species to polionotus. Maps of restriction sites indicate that all of the variation observed can be reasonably attributed to base substitutions leading to loss or gain of particular recognition sites. Magnitude of mtDNA sequence divergence within polionotus (maximum approximately equal to 2%) is roughly comparable to that observed within any of five previously identified mtDNA assemblages in maniculatus. Sequence divergence within leucopus (maximum approximately equal to 4%) is somewhat greater than that within polionotus. Consideration of probable evolutionary links among mtDNA restriction site maps allowed estimation of matriarchal phylogenies within polionotus and leucopus. Clustering algorithms and qualitative Wagner procedures were used to generate phenograms and parsimony networks, respectively, for the between-species comparisons. Three simple graphical models are presented to illustrate some conceivable relationships of mtDNA differentiation to speciation. In theoretical case I, each of two reproductively defined species (A and B) is monophyletic in matriarchal genealogy; the common female ancestor of either species can either predate or postdate the speciation. In case II, neither species is monophyletic in matriarchal genotype. In case III, species B is monophyletic but forms a subclade within A which is thus paraphyletic with respect to B. The empirical results for mtDNA in maniculatus and polionotus appear to conform closely to case III. These theoretical and empirical considerations raise a number of questions about the general relationship of the speciation process to the evolution of uniparentally transmitted traits. Some of these considerations are presented, and it is suggested that the distribution patterns of mtDNA sequence variation within and among extant species should be of considerable relevance to the particular demographies of speciation.      

High-sensitivity DNA detection with a laser-excited confocal fluorescence gel scanner

A high-sensitivity, laser-excited confocal fluorescence gel scanner has been developed and applied to the detection of fluorescently labeled DNA. An argon ion laser (1-10 mW at 488 nm) is focused in the gel with a high-numerical aperture microscope objective. The laser-excited fluorescence is gathered by the objective and focused on a confocal spatial filter, followed by a spectral filter and photodetector. The gel is placed on a computer-controlled scan stage, and the scanned image of the gel fluorescence is stored and analyzed in a computer. This scanner has been used to detect DNA separated on sequencing gels, agarose mapping gels and pulsed field gels. Sanger sequencing gels were run on M13mp18 DNA using a fluoresceinated primer. The 400-microns-thick gels, loaded with 30 fmol of DNA fragments in 3-mm lanes, were scanned at 78-microns resolution. The high resolution of our scanner coupled with image processing allows us to read up to approximately 300 bases in four adjacent sequencing lanes. The minimum band size that could be detected and read was approximately 200 microns. This instrument has a limiting detection sensitivity of approximately 10 amol of fluorescein-labeled DNA in a 1 x 3-mm band. In applications to agarose mapping gels, we have exploited the fact that DNA can be prestained with ethidium homodimer, followed by electrophoresis and fluorescence detection to achieve picogram sensitivity. We have also developed methods using both ethidium homodimer and thiazole orange staining which permit two-color detection of DNA in one lane.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cost versus environment? Combined life cycle,techno-economic,and circularity assessment of silicon- and perovskite-based photovoltaic systems

Photovoltaics will play a key role in future energy systems, but their full potential may not be realized until their life cycles are optimized for circularity and overall sustainability. Methods that quantify flows of compound and minor element mixtures, rather than non-mixed elemental flows, are needed to prospectively analyze and predict inventory and performance for complex technology life cycles. This study utilizes process simulation to resolve the mass and energy balances needed to rigorously analyze these complexities in circular systems. Using physics-based prospective inventory data, we simultaneously assess the environmental and techno-economic performance of three photovoltaic life cycles and predict the effects of circularity on resource efficiency, carbon footprint, and levelized cost of electricity. One inventory dataset is generated per life cycle to ensure alignment between assessments and to identify trade-offs between environmental and techno-economic performance with respect to circularity, so linking circularity and sustainability. The linked material and energy resource and techno-economic models allow for the impacts of carbon taxation and the moderating effects of circularity to be explored. In addition to the clear environmental benefits of increased circularity, we find that it could dampen the cost impact of taxation. While confirming that perovskite-based modules, single junction or in tandem with silicon, clearly outperform the silicon market standard both techno-economically and environmentally, we show that maximum circularity does not automatically deliver the most sustainable outcome. The approach enables assessment of the combined impacts of specific technological, commercial, and policy choices made by different actors along the photovoltaic value chain. This article met the requirements for a gold–gold JIE data openness badge described at http://jie.click/badges .      

The replicative helicase MCM recruits cohesin acetyltransferase ESCO2 to mediate centromeric sister chromatid cohesion

Chromosome segregation depends on sister chromatid cohesion which is established by cohesin during DNA replication. Cohesive cohesin complexes become acetylated to prevent their precocious release by WAPL before cells have reached mitosis. To obtain insight into how DNA replication, cohesion establishment and cohesin acetylation are coordinated, we analysed the interaction partners of 55 human proteins implicated in these processes by mass spectrometry. This proteomic screen revealed that on chromatin the cohesin acetyltransferase ESCO2 associates with the MCM2‐7 subcomplex of the replicative Cdc45‐MCM‐GINS helicase. The analysis of ESCO2 mutants defective in MCM binding indicates that these interactions are required for proper recruitment of ESCO2 to chromatin, cohesin acetylation during DNA replication, and centromeric cohesion. We propose that MCM binding enables ESCO2 to travel with replisomes to acetylate cohesive cohesin complexes in the vicinity of replication forks so that these complexes can be protected from precocious release by WAPL. Our results also indicate that ESCO1 and ESCO2 have distinct functions in maintaining cohesion between chromosome arms and centromeres, respectively.     

The Effect of Lactobacillus salivarius SGL03 on Clinical and Microbiological Parameters in Periodontal Patients

The destruction of periodontal tissues during periodontitis is the result of the immune-inflammatory reactions to the bacteria of dental biofilm. Probiotics may reduce dysbiosis by the modification of the dental microbiome, which can influence the immune-inflammatory mechanisms. The aim of this study was to estimate the clinical and microbiological parameters, before and after 30 days of application of the dietary supplement containing Lactobacillus salivarius SGL03 or placebo. The study was conducted in 51 patients with stage I or II periodontitis during the maintenance phase of treatment. The clinical parameters and the number of colony forming units (CFU) of bacteria in supragingival plaque were assessed before and after 30 days of the oral once daily administration of the dietary supplement in the form of suspension containing L. salivarius SGL03 or placebo. There were no changes in the PI scores between and within the groups. The value of BOP decreased in both groups. In the study group the significant reduction of the mean pocket depth was revealed (from 2.5 to 2.42, p = 0,027) but without the difference between the groups. There were no significant changes in the number of bacteria within the groups. In the control, but not the study group, positive correlations were observed between the clinical parameters (variables) and the number of bacteria. The use of the dietary supplement containing L. salivarius SGL03 may reduce pocket depth despite the lack of changes in other clinical parameters and the number of bacteria in supragingival plaque.Key words: probiotics, periodontal treatment, Lactobacillus salivarius     

Functional cloning vectors for use in directional cDNA cloning using cohesive ends produced with T4 DNA polymerase.

This paper describes the construction of 'Prime' cloning vectors, which include phage lambda and plasmid vectors useful for functional cloning in oocytes, yeast, and mammalian cells, and their use in a 'Prime' cloning system. The system takes advantage of the very active and precise 3' exonuclease activity of T4 DNA polymerase to produce single-stranded (ss) ends (cut-back) of vector and insert DNA. This results in the highly efficient directional cloning of cDNA and PCR-amplified DNA. The system obviates the need to digest insert DNA with a restriction endonuclease to unveil cloning sites, and thus eliminates the chance of internal digestion of the insert DNA. The cloning of PCR-amplified DNA, which is sometimes difficult, is made routine with this system. The 'Prime' sequence is included in vector cloning sites and cDNA and PCR primers. The 'Prime' sequence was chosen so that the ss sticky ends are nonpalindromic and will hybridize only to the appropriate partners. This makes cloning with the 'Prime' system very efficient, because neither the vector nor insert DNA is lost to unproductive self-hybridization.