Comparison of three standard anatomical reference frames for the tibia-fibula complex

Definition of anatomical reference frames is necessary both for in vitro biomechanical testing, and for in vivo human movement analyses. Different reference frames have been proposed in the literature for the lower limb, and in particular for the tibia–fibula complex. The scope of this work was to compare the three most commonly referred proposals (proposed by [Ruff, C.B., Hayes, W.C., 1983. Cross-sectional geometry at Pecos Pueblo femora and tibiae —A biomechanical investigation: I. method and general patterns of variation. American Journal of Physical Anthropology 60, pp. 359–381.], by [Cappozzo, A., Catani, F., Della Croce, U., Leardini, A., 1995. Position and orientation in space of bones during movement: anatomical frame definition and determination. Clinical Biomechanics (Bristol, Avon) 10, pp. 171–178.], and by the Standardization and Terminology Committee of the International Society of Biomechanics, [Wu, G., Siegler, S., Allard, P., Kirtley, C., Leardini, A., Rosenbaum, D., Whittle, M., D'Lima, D.D., Cristofolini, L., Witte, H., Schmid, O., Stokes, I., 2002. ISB recommendation on definitions of joint coordinate system of various joints for reporting of human joint motion—part I: ankle, hip and spine. International Society of Biomechanics. Journal of Biomechanics 35, pp. 543–548.]). These three frames were identified on six cadaveric tibia–fibula specimens based on the relevant anatomical landmarks, using a high-precision digitizer. The intra-operator (ten repetitions) and inter-operator (three operators) repeatability were investigated in terms of reference frame orientation. The three frames had similar intra-operator repeatability. The reference frame proposed by Ruff et al. had a better inter-operator repeatability (this must be put in relation with the original context of interest, i.e. in vitro measurements on dissected bones). The reference frames proposed by Ruff et al. and by ISB had a similar alignment; the frame proposed by Cappozzo et al. was considerably externally rotated and flexed with respect to the other two. Thus, the reference frame proposed by Ruff et al. is preferable when the full bone surface is accessible (typically during in vitro tests). Conversely, no advantage in terms of repeatability seems to exist between the reference frames proposed by Cappozzo et al. and ISB.     

Is the hydrophobic core a universal structural element in proteins?

The hydrophobic core, when subjected to analysis based on the fuzzy oil drop model, appears to be a universal structural component of proteins irrespective of their secondary, supersecondary, and tertiary conformations. A study has been performed on a set of nonhomologous proteins representing a variety of CATH categories. The presence of a well-ordered hydrophobic core has been confirmed in each case, regardless of the protein’s biological function, chain length or source organism. In light of fuzzy oil drop (FOD) analysis, various supersecondary forms seem to share a common structural factor in the form of a hydrophobic core, emerging either as part of the whole protein or a specific domain. The variable status of individual folds with respect to the FOD model reflects their propensity for conformational changes, frequently associated with biological function. Such flexibility is expressed as variable stability of the hydrophobic core, along with specific encoding of potential conformational changes which depend on the properties of helices and β-folds.     

Joint non-uniform sampling of all incremented time delays for quicker acquisition in protein relaxation studies

NMR relaxometry plays crucial role in studies of protein dynamics. The measurement of longitudinal and transverse relaxation rates of \(^{15}\)N is the main source of information on backbone motions. However, even the most basic approach exploiting a series of \(^{15}\)N HSQC spectra can require several hours of measurement time. Standard non-uniform sampling (NUS), i.e. random under-sampling of indirect time domain, typically cannot reduce this by more than 2–4\(\times\) due to relatively low “compressibility” of these spectra. In this paper we propose an extension of NUS to relaxation delays. The two-dimensional space of \(t_1\)/\(t_{relax}\) is sampled in a way similar to NUS of \(t_1\)/\(t_2\) domain in 3D spectra. The signal is also processed in a way similar to that known from 3D NUS spectra i.e. using one of the most popular compressed sensing algorithms, iterative soft thresholding. The 2D Fourier transform matrix is replaced with mixed inverse Laplace-Fourier transform matrix. The peak positions in resulting 3D spectrum are characterized by two frequency coordinates and relaxation rate and thus no additional fitting of exponential curves is required. The method is tested on three globular proteins, providing satisfactory results in a time corresponding to acquisition of two conventional \(^{15}\)N HSQC spectra.     

Microbial traces and their role in forensic science

Forensic microbiology, also known as the microbiology of death, is an emerging branch of science that is still underused in criminal investigations. Some of the cases might be difficult to solve with commonly used forensic methods, and then they become an operational field for microbiological and mycological analyses. The aim of our review is to present significant achievements of selected studies on the thanatomicrobiome (micro-organisms found in the body, organs and fluids after death) and epinecrotic community (micro-organisms found on decaying corpses) that can be used in forensic sciences. Research carried out as a part of the forensic microbiology deals with the thanatomicrobiome and the necrobiome—communities of micro-organisms that live inside and outside of a putrefying corpse. Change of species composition observed in each community is a valuable feature that gives a lot of information related to the crime. It is mainly used in the estimation of post-mortem interval (PMI). In some criminal investigations, such noticeable changes in the microbiome and mycobiome can determine the cause or the actual place of death. The microbial traces found at the crime scene can also provide clear evidence of guilt. Nowadays, identification of micro-organisms isolated from the body or environment is based on metagenome analysis and 16S rRNA gene amplicon-based sequencing for bacteria and ITS rRNA gene amplicon-based sequencing for fungi. Cultivation methods are still in use and seem to be more accurate; however, they require much more time to achieve a final result, which is an unwanted feature in any criminal investigation.     

In vitro replication of spontaneous fractures of the proximal human femur

Spontaneous fractures (i.e. caused by sudden loading and muscle contraction, not by trauma) represent a significant percentage of proximal femur fractures. They are particularly relevant as may occur in elderly (osteoporotic) subjects, but also in relation to epiphyseal prostheses. Despite its clinical and legal relevance, this type of fracture has seldom been investigated. Studies concerning spontaneous fractures are based on a variety of loading scenarios. There is no evidence, nor consensus on the most relevant loading scenario. The aim of this work was to develop and validate an experimental method to replicate spontaneous fractures in vitro based on clinically relevant loading. Primary goals were: (i) repeatability and reproducibility, (ii) clinical relevance. A validated numerical model was used to identify the most critical loading scenario that can lead to head-neck fractures, and to determine if it is necessary to include muscle forces when the head-neck region is under investigation. The numerical model indicated that the most relevant loading scenario is when the resultant joint force is applied to the head at 8 degrees from the diaphysis. Furthermore, it was found that it is not essential to include the muscles when investigating head-neck fractures. The experimental setup was consequently designed. The procedure included high-speed filming of the fracture event. Clinically relevant fracture modes were obtained on 10 cadaveric femurs. Failure load should be reported as a fraction of donor's body-weight to reduce variability. The proposed method can be used to investigate the reason and mechanism of failure of natural and operated proximal femurs.     

Hierarchical modeling of protein interactions

A novel approach to hierarchical peptide-protein and protein-protein docking is described and evaluated. Modeling procedure starts from a reduced space representation of proteins and peptides. Polypeptide chains are represented by strings of alpha-carbon beads restricted to a fine-mesh cubic lattice. Side chains are represented by up to two centers of interactions, corresponding to beta-carbons and the centers of mass of the remaining portions of the side groups, respectively. Additional pseudoatoms are located in the centers of the virtual bonds connecting consecutive alpha carbons. These pseudoatoms support a model of main-chain hydrogen bonds. Docking starts from a collection of random configurations of modeled molecules. Interacting molecules are flexible; however, higher accuracy models are obtained when the conformational freedom of one (the larger one) of the assembling molecules is limited by a set of weak distance restraints extracted from the experimental (or theoretically predicted) structures. Sampling is done by means of Replica Exchange Monte Carlo method. Afterwards, the set of obtained structures is subject to a hierarchical clustering. Then, the centroids of the resulting clusters are used as scaffolds for the reconstruction of the atomic details. Finally, the all-atom models are energy minimized and scored using classical tools of molecular mechanics. The method is tested on a set of macromolecular assemblies consisting of proteins and peptides. It is demonstrated that the proposed approach to the flexible docking could be successfully applied to prediction of protein-peptide and protein-protein interactions. The obtained models are almost always qualitatively correct, although usually of relatively low (or moderate) resolution. In spite of this limitation, the proposed method opens new possibilities of computational studies of macromolecular recognition and mechanisms of assembly of macromolecular complexes.     

Netted crop covers reduce honeybee foraging activity and colony strength in a mass flowering crop

The widespread use of protective covers in horticulture represents a novel landscape‐level change, presenting the challenges for crop pollination. Honeybees (Apis mellifera L) are pollinators of many crops, but their behavior can be affected by conditions under covers. To determine how netting crop covers can affect honeybee foraging dynamics, colony health, and pollination services, we assessed the performance of 52 nucleus honeybee colonies in five covered and six uncovered kiwifruit orchards. Colony strength was estimated pre‐ and postintroduction, and the foraging of individual bees (including pollen, nectar, and naïve foragers) was monitored in a subset of the hives fitted with RFID readers. Simultaneously, we evaluated pollination effectiveness by measuring flower visitation rates and the number of seeds produced after single honeybee visits. Honeybee colonies under cover exhibited both an acute loss of foragers and changes in the behavior of successful foragers. Under cover, bees were roughly three times less likely to return after their first trip outside the hive. Consequently, the number of adult bees in hives declined at a faster rate in these orchards, with colonies losing on average 1,057 ± 274 of their bees in under two weeks. Bees that did forage under cover completed fewer trips provisioning their colony, failing to reenter after a few short‐duration trips. These effects are likely to have implications for colony health and productivity. We also found that bee density (bees/thousand flowers) and visitation rates to flowers were lower under cover; however, we did not detect a resultant change in pollination. Our findings highlight the need for environment‐specific management techniques for pollinators. Improving honeybee orientation under covers and increasing our understanding of the effects of covers on bee nutrition and brood rearing should be primary objectives for maintaining colonies and potentially improving pollination in these systems.     

Association study of folate-related enzymes (MTHFR,MTR, MTRR) genetic variants with non-obstructive male infertility in a Polish population

Spermatogenesis is a process where an important contribution of genes involved in folate-mediated one-carbon metabolism is observed. The aim of the present study was to investigate the association between male infertility and the MTHFR (677C > T; 1298A > C), MTR (2756A > G) and MTRR (66A > G) polymorphisms in a Polish population. No significant differences in genotype or allele frequencies were detected between the groups of 284 infertile men and of 352 fertile controls. These results demonstrate that common polymorphisms in folate pathway genes are not major risk factors for non-obstructive male infertility in the Polish population.