Theoretical studies of biliverdin: energetics of the reduction pathways to bilirubin

Geometries and energies of formation of bilirubin formed by reduction of biliverdin via three meso carbon sites, the , and positions, have been calculated using semiempirical methods. It has been shown that -bilirubin with a ridge-tile conformation forms six intramolecular hydrogen bonds and is the most stable of the three above mentioned positions by at least 22 kcal mol^–1. Reduction pathways for -, - and -bilirubin formations from biliverdin are studied in detail. The roles of loss of conjugation and hydrogen bond formations in stability of different conformers have been discussed. -Bilirubin was fully optimized by using ab initio methods. Fine refinements of calculated results show excellent agreement with experimental results. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00894-002-0078-9.Electronic Supplementary Material available.     

Aromatic residues in the C-terminal region of glutathione transferase A1-1 influence rate-determining steps in the catalytic mechanism

Human glutathione transferase A1-1 (GST A1-1) has a flexible C-terminal segment that forms a helix (alpha9) closing the active site upon binding of glutathione and a small electrophilic substrate such as 1-chloro-2,4-dinitrobenzene (CDNB). In the absence of active-site ligands, the C-terminal segment is not fixed in one position and is not detectable in the crystal structure. A key residue in the alpha9-helix is Phe 220, which can interact with both the enzyme-bound glutathione and the second substrate, and possibly guide the reactants into the transition state. Mutation of Phe 220 into Ala and Thr was shown to reduce the catalytic efficiency of GST A1-1. The mutation of an additional residue, Phe 222, caused further decrease in activity. The presence of a viscosogen in the reaction medium decreased the kinetic parameters k(cat) and k(cat)/K(m) for the conjugation of CDNB catalyzed by wild-type GST A1-1, in agreement with the view that product release is rate limiting for the substrate-saturated enzyme. The mutations cause a decrease of the viscosity dependence of both kinetic parameters, indicating that the motion of the alpha9-helix is linked to catalysis in wild-type GST A1-1. The isomerization reaction with the alternative substrate Delta(5)-androstene-3,17-dione (AD) is affected in a similar manner by the viscosogens. The transition state energy of the isomerization reaction, like that of the CDNB conjugation, is lowered by Phe 220 as indicated by the effects of the mutations on k(cat)/K(m). The results demonstrate that Phe 220 and Phe 222, in the dynamic C-terminal segment, influence rate-determining steps in the catalytic mechanism of both the substitution and the isomerization reactions.     

Interaction of metal ions with caffeine and theophylline: stability and structural features

The interactions of caffeine and theophylline with divalent cadmium, mercury, strontium and barium ions were studied in aqueous solution and physiological pH. Fourier transform infrared spectroscopy (FTIR) and absorption spectra were used to determine the cation binding mode and association constants. Spectroscopic results showed that Cd(2+), Hg(2+), Sr(2+) and Ba(2+) bind strongly to caffeine and theophylline. Direct and indirect (through metal hydration shell) interactions were observed for caffeine and theophylline with Cd(2+), Hg(2+), Sr(2+) and Ba(2+) through O6 and N9 (caffeine) and O6, N9 and N7 atoms (theophylline). The overall binding constants are:k(Cd-caffeine) = 1.24 x 10(5) M(-1), k(Hg-caffeine) = 1.74 x 10(5) M(-1), k(Sr- caffeine) = 3.3 x 10(4) M(-1), k(Ba-caffeine) = 1.8 x 10(4) M(-1), k(Cd-theophylline) = 5.75 x 10(5) M(-1), k(Hg-theophylline) = 2.14 x 10(5) M(-1), k(Sr-theophylline) = 4.6 x 10(4) M(-1), k(Ba-theophylline) = 3 x 10(4) M(-1). These k values are evidence for weak and strong cation interactions in these metal complexes.     

Bioactive coatings of endovascular stents based on polyelectrolyte multilayers

Layer-by-layer self-assembly of two polysaccharides, hyaluronan (HA) and chitosan (CH), was employed to engineer bioactive coatings for endovascular stents. A polyethyleneimine (PEI) primer layer was adsorbed on the metallic surface to initiate the sequential adsorption of the weak polyelectrolytes. The multilayer growth was monitored using a radiolabeled HA and shown to be linear as a function of the number of layers. The chemical structure, interfacial properties, and morphology of the self-assembled multilayer were investigated by time-of-flight secondary ions mass spectrometry (ToF-SIMS), contact angle measurements, and atomic force microscopy (AFM), respectively. Multilayer-coated NiTi disks presented enhanced antifouling properties, compared to unmodified NiTi disks, as demonstrated by a decrease of platelet adhesion in an in vitro assay (38% reduction; p = 0.036). An ex vivo assay on a porcine model indicated that the coating did not prevent fouling by neutrophils. To assess whether the multilayers may be exploited as in situ drug delivery systems, the nitric-oxide-donor sodium nitroprusside (SNP) was incorporated within the multilayer. SNP-doped multilayers were shown to further reduce platelet adhesion, compared to standard multilayers (40% reduction). When NiTi wires coated with a multilayer containing a fluorescently labeled HA were placed in intimate contact with the vascular wall, the polysaccharide translocated on the porcine aortic samples, as shown by confocal microscopy observation of a treated artery. The enhanced thromboresistance of the self-assembled multilayer together with the antiinflammatory and wound healing properties of hyaluronan and chitosan are expected to reduce the neointimal hyperplasia associated with stent implantation.     

Identification and structural analysis of four serine proteases in a monotreme, the platypus, Ornithorhynchus anatinus

To study the emergence of the major subfamilies of serine proteases during vertebrate evolution, we present here the primary structure of four serine proteases expressed in the spleen of a monotreme, the platypus, Ornithorhynchus anatinus. Partial cDNA clones for four serine proteases were isolated by a PCR-based strategy. This strategy is based on the high level of sequence identity between various members of the large gene family of trypsin-related serine proteases, over two highly conserved regions, those of the histidine and the serine of the catalytic triad. The partial cDNA clones were used to isolate full-length or almost full-length cDNA clones for three of these proteases from a platypus spleen cDNA library. By phylogenetic analysis, these three clones were identified as being the platypus homologues of human coagulation factor X, neutrophil elastase, and a protease distantly related to the T-cell granzymes. The remaining partial clone was found to represent a close homologue of human complement factor D (adipsin). The isolation of these four clones shows that several of the major subfamilies of serine proteases had evolved as separate subfamilies long before the radiation of the major mammalian lineages of today, the monotremes, the marsupials, and the placental mammals. Upon comparison of the corresponding proteases of monotremes and eutherian mammals, the coagulation and complement proteases were shown to display a higher degree of conservation compared to the hematopoietic proteases N-elastase and the T-cell granzymes. This latter finding indicates a higher evolutionary pressure to maintain specific functions in the complement and coagulation enzymes compared to many of the hematopoietic serine proteases.     

A Meta-Analysis of Site-Specific Effects of Cathodal Transcranial Direct Current Stimulation on Sensory Perception and Pain

The primary aim of our meta-analysis was to evaluate the effects of cathodal transcranial direct current stimulation (c-tDCS) on sensory and pain thresholds (STh and PTh) in healthy individuals and pain level (PL) in patients with chronic pain. Electronic databases were searched for c-tDCS studies. Methodological quality was evaluated using the PEDro and Downs and Black (D&B) assessment tools. C-tDCS of the primary motor cortex (S1) increases both STh (P<0.001, effect size of 26.84%) and PTh (P<0.001, effect size of 11.62%). In addition, c-tDCS over M1 led to STh increase (P<0.005, effect size of 30.44%). Likewise, PL decreased significantly in the patient group following application of c-tDCS. The small number of studies precluded subgroup analysis. Nevertheless, meta-analysis showed that in all groups (except c-tDCS of S1) active c-tDCS and sham stimulation produced significant differences in STh/PTh in healthy and PL in patient group. This review provides evidence for the site-specific effectiveness of c-tDCS in increasing STh/PTh in healthy individuals and decreasing PL in patients with chronic pain. However, due to small sample sizes in the included studies, our results should be interpreted with caution. Given that the level of blinding was not considered in the inclusion criteria, the results of the current study should be interpreted with caution.     

Development of Acid-Resistant Alginate/Trimethyl Chitosan Nanoparticles Containing Cationic β-Cyclodextrin Polymers for Insulin Oral Delivery

In this study, the use of trimethylchitosan (TMC), by higher solubility in comparison with chitosan, in alginate/chitosan nanoparticles containing cationic β-cyclodextrin polymers (CPβCDs) has been studied, with the aim of increasing insulin uptake by nanoparticles. Firstly, TMCs were synthesized by iodomethane, and CPβCDs were synthesized within a one-step polycondensation reaction using choline chloride (CC) and epichlorohydrine (EP). Insulin–CβCDPs complex was prepared by mixing 1:1 portion of insulin and CPβCDs solutions. Then, nanoparticles prepared in a three-step procedure based on the iono-tropic pregelation method. Nanoparticles screened using experimental design and Placket Burman methodology to obtain minimum size and polydispercity index (pdI) and the highest entrapment efficiency (EE). CPβCDs and TMC solution concentration and pH and alginate and calcium chloride solution concentrations are found as the significant parameters on size, PdI, and EE. The nanoparticles with proper physicochemical properties were obtained; the size, PdI, and EE% of optimized nanoparticles were reported as 150.82 ± 21 nm, 0.362 ± 0.036, and 93.2% ± 4.1, respectively. The cumulative insulin release in intestinal condition achieved was 50.2% during 6 h. By SEM imaging, separate, spherical, and nonaggregated nanoparticles were found. In the cytotoxicity studies on Caco-2 cell culture, no significant cytotoxicity was observed in 5 h of incubation, but after 24 h of incubation, viability was decreased to 50% in 0.5 mμ of TMC concentration. Permeability studies across Caco-2 cells had been carried out, and permeability achieved in 240 min was 8.41 ± 0.39%, which shows noticeable increase in comparison with chitosan nanoparticles. Thus, according to the results, the optimized nanoparticles can be used as a new insulin oral delivery system.KEY WORDS: alginate, cationic β-cyclodextrin, insulin nanoparticle, oral delivery, trimethyl chitosan