A pre-formed Pyrogenic Factor Released by Lipopolysaccharide Stimulated Macrophages

The aim of this study was to investigate the pyrogenic activity of factor(s) released by rat peritoneal macrophages following a brief stimulation with LPS. The effect of this factor on the number of circulating leukocytes and serum Fe, Cu and Zn levels, was also evaluated. The possibility that the content of interleukin (IL)-1beta, IL-6 and tumour necrosis factor (TNF) in the supernatant could explain the observations was investigated. Supernatant produced over a period of 1 h by peritoneal macrophages, following a 30 min incubation with LPS at 37 degrees C, was ultrafiltered through a 10 000 MW cut-off Amicon membrane, sterilized, and concentrated 2.5, 5, 10 and 20 times. The intravenous (i.v.) injection of this supernatant induced a concentration-dependent fever in rats with a maximal response at 2 h. The pyrogenic activity was produced by macrophages elicited with thioglycollate and by resident cells. The supernatants also induced neutrophilia and reduction in Fe and Zn 6 h after the injection. Absence of activity in boiled supernatants, or supernatants from macrophages incubated at 4 degrees C with LPS, indicates that LPS was not responsible for the activity. In vitro treatment with indomethacin (Indo), dexamethasone (Dex), or cycloheximide (Chx) did not modify the release of pyrogenic activity into the supernatant or its effects on the reduction in serum metal levels. Although Chx abolished the production of mediator(s) inducing neutrophilia, and Dex reduced the induction of IL-1beta, TNF and IL-6, injection of the highest concentration of these cytokines detected in the supernatants did not induce fever. In vivo treatment with Dex, but not Indo, abolished the fever induced by the supernatant. These results suggest that macrophages contain pre-formed pyrogenic mediator(s), not related to IL-1beta, IL-6 or TNF, that acts indirectly and independently of prostaglandtn. It also seems likely that the pyrogenic activity is related to the factor responsible for the reduction of serum Fe and Zn levels, but not the neutrophilia.     

Prevalence of Colonization Factor Antigens (CFAs) and Adherence to HeLa Cells in Enterotoxigenic Escherichia coli Isolated from Feces of Children in São Paulo

Fifty-eight enterotoxigenic Escherichia coli (ETEC) strains, isolated from children with and without diarrhea in Sao Paulo, were examined for the presence of colonization factor antigens (CFAs) and their ability to adhere to HeLa cells. Antisera to CFA/I, the coli surface (CS) antigens CS1CS3, CS2CS3, and CS2 of CFA/II, CFA/III, and CS5CS6 and CS6 of CFA/IV were used. CFAs were identified in 43% of the ETEC strains: 40% of the strains with CFAs harbored CFA/I, 24% carried CFA/II (CS1CS3), 24% carried CFA/IV (CS6), and 12% carried CFA/IV (CS5CS6). CFAs occurred mainly among ETEC strains producing only heat-stable (ST-I) enterotoxin and in strains also producing heat-labile toxin (LT-I). No ETEC strains tested expressed CFA/III. A marked change in serotypes of ST-I-producing strains was found in Sao Paulo between 1979 and 1990. Adherence to HeLa cells was detected in 14% of the ETEC strains. All of them had a diffuse adherence pattern and produced only ST-I, and 88% carried CS6 antigen.     

Phytoplankton composition in the Weddell-Scotia Confluence area during austral spring in relation to hydrography

During the EPOS leg 2 cruise of the RV Polarstern, carried out in late austral spring of 1988–1989, the composition of phytoplankton in relation to the distribution of hydrographic parameters was studied in four successive transects carried out along 49°W and 47°W, across the Weddell-Scotia Confluence (WSC) and the marginal ice zone (which overlapped in part). In all transects, a maximum of phytoplankton biomass was found in the WSC, in surface waters stabilized by ice melting. Different phytoplankton assemblages could be distinguished. North of the Scotia Front (the northern limit of the WSC) diatoms with Chaetoceros neglectus, Nitzschia spp. and (Thalassiosira gravida) dominated the phytoplankton community. This assemblage appeared to have seeded a biomass maximum which occupied, during the first transect, an area of the WSC, south of the Scotia Front. The southernmost stations of the first transect and all the stations to the south of the Scotia Front in the other transects were populated by a flagellate assemblage (with a cryptomonad, Pyramimonas spp. and Phaeocystis sp.) and an assemblage of diatoms (Corethron criophilum and Tropidoneis vanheurkii among others) associated to the presence of ice. During the last three transects, the flagellate assemblage formed a bloom in the low salinity surface layers of the WSC zone. The bulk of the biomass maximum was formed by the cryptomonad which reached concentrations up to 4×10⁶ cells l^–1 towards the end of the cruise. Multivariate analysis is used to summarize phytoplankton composition variation. The relationships between the distribution of the different assemblages and the hydrographic conditions indicate that the change of dominance from diatoms to flagellates in the WSC zone was related to the presence of water masses from different origin.Data presented here were collected during the European Polarstern Study (EPOS) sponsored by the European Science Foundation     

Analysis of the frequency of inheritance of transposed Ds elements in Arabidopsis after activation by a CaMV 35S promoter fusion to the Ac transposase gene

The Ac/Ds transposon system of maize shows low activity in Arabidopsis. However, fusion of the CaMV 35S promoter to the transposase gene (35S::TPase) increases the abundance of the single Ac mRNA encoded by Ac and increases the frequency of Ds excision. In the experiments reported here it is examined whether this high excision frequency is associated with efficient re-insertion of the transposon. This was measured by using a Ds that carried a hygromycin resistance gene (HPT) and was inserted within a streptomycin resistance gene (SPT). Excision of Ds therefore gives rise to streptomycin resistance, while hygromycin resistance is associated with the presence of a transposed Ds or with retention of the element at its original location. Self-fertilisation of most individuals heterozygous for Ds and 35S::TPase produced many streptomycin-resistant (strep^r) progeny, but in many of these families a small proportion of strep^r seedlings were also resistant to hygromycin (hyg^r). Nevertheless, 70% of families tested did give rise to at least one strep^r, hyg^r seedling, and over 90% of these individuals carried a transposed Ds. In contrast, the Ac promoter fusion to the transposase gene (Ac::TPase) produced fewer strep^rhyg^r progeny, and only 53% of these carried a transposed Ds. However, a higher proportion of the strep^r seedlings were also hyg^r than after activation by 35S::TPase. We also examined the genotype of strep^r, hyg^r seedlings and demonstrated that after activation by 35S::TPase many of these were homozygous for the transposed Ds, while this did not occur after activation by Ac::TPase. From these and other data we conclude that excisions driven by 35S::TPase usually occur prior to floral development, and that although a low proportion of strep^r progeny plants inherit a transposed Ds, those that do can be efficiently selected with an antibiotic resistance gene contained within the element. Our data have important implications for transposon tagging strategies in transgenic plants and these are discussed.     

Hydraulic properties of sphagnum peat moss and tuff (scoria) and their potential effects on water availability

The importance of macrostructure to root growth of ryegrass (L. perenne) seedlings sown on the soil surface was studied in two soils in which the macrostructure had resulted mainly from root growth and macro-faunal activity. Sets of paired soil cores were used, one of each pair undisturbed and the other ground and repacked to the field bulk density. Undisturbed and repacked soils were first compared at equal water potentials in the range −1.9 to −300 kPa. At equal water potential, the undisturbed soil always had the greater strength (penetration resistance), and root growth was always greater in the repacked soil with no macrostructure than it was in the soil with macrostructure intact. At equal high strength (low water potentials) it appeared that root growth was better when soils were structured. When strength was low (high water potentials), root growth was better in the unstructured soil. Soils were then compared during drying cycles over 21 days. The average rate at which roots grew to a depth of 60 mm, and also the final percentage of plants with a root reaching 60 mm depth, was greatest in repacked soils without macrostructure. The species of vegetation growing in the soil before the experiment affected root growth in undisturbed soil; growth was slower where annual grasses and white clover had grown compared with soil which had supported a perennial grass. It appears that relatively few roots locate and grow in the macrostructure. Other roots grow in the matrix, if it is soft enough to be deformed by roots. Roots in the matrix of a structured soil grow more slowly than roots in structureless soil of equal bulk density and water potential. The development of macrostructure in an otherwise structureless soil, of the type studied, is of no advantage to most roots. However, once a macrostructure has developed, the few roots locating suitable macropores are able to grow at low water potential when soil strength is high. The importance of macrostructure to establishing seedlings in the field lies in rapid penetration of at least a few roots to a depth that escapes surface drying during seasonal drought. ei]{gnB E}{fnClothier}     

Microbial production of xylitol from D-xylose using Candida tropicalis

Candida tropicalis DSM 7524 was used to produce xylitol from d-xylose. The fermentation conditions were optimized during continuous cultivation. The strain employed showed no great dependence upon temperature in a range between 30° C and 37° C. It achieved its best yield of xylitol from d-xylose at a pH value of 2.5. Such low pH values allow non sterile cultivation, which is a major economic factor. With an oxygen uptake rate of 0.8–1 ml oxygen per litre culture medium, the C. tropicalis produce xylitol at a yield of between 77% and 80% of the theoretical value. Higher yeast extract concentrations prevent the conversion of d-xylose into xylitol. d-xylose acts as a growth inhibitor in higher concentrations. The maximum xylitol yield was reached at a d-xylose concentration of around 100 g/l. In a non sterile batch culture with substrate shift 220 g/l xylitol were produced from 300 g/l d-xylose at a xylitol productivity rate of 0.37 g/(lh). In order to increase the specific yield, C. tropicalis was immobilised on porous glass and cultivated in a fluidized bed reactor. In a continuous non sterile cultivation with immobilised cells 155 g/l d-xylose produced 90–95% g/l xylitol with a productivity of 1.35 g/(lh).Mr. S. S. da Silva was a visiting scientist to the GBF. He was supported by a scholarship from the National Council of Scientific and Technological Development, Brasilia, Brazil (CNPq).We also would like to gratefully acknowledge the support of Prof. Dr. Michele Vitolo of the University of Sao Paulo, and the Centre for Biotechnology and Chemistry, Lorena, S. P. Brazil, in particular the Department of Fermentative Process.We are grateful to Prof. Rainer Jonas, head of the International Cooperation between Germany/Brazil for the helpful discussions and Dr. Heinrich Lönsdorf (GBF) for the Scanning electron micrographs.Dedicated to the 65th birthday of Prof. Dr. Fritz Wagner.     

On the appropriateness of use of a continuous formulation for the modelling of discrete multireactant systems following Michaëlis–Menten kinetics

The possibility of solving the mass balances to a multiplicity of substrates within a CSTR in the presence of a chemical reaction following Michaelis-Menten kinetics using the assumption that the discrete distribution of said substrates is well approximated by an equivalent continuous distribution on the molecular weight is explored. The applicability of such reasoning is tested with a convenient numerical example. In addition to providing the limiting behavior of the discrete formulation as the number of homologous substrates increases, the continuous formulation yields in general simpler functional forms for the final distribution of substrates than the discrete counterpart due to the recursive nature of the solution in the latter case.List of Symbols C{N. M} mol/m³ concentration of substrate containing N monomer residues each with molecular weight M - {N, M} normalized value of C{N. M} - C {M} mol/m³ da concentration of substrate of molecular weight M - _in normalized value of C {M} at the i-th iteration of a finite difference method - {M} normalized value of C {M} - C ₀{N.M} mol/m³ inlet concentration of substrate containing N monomer residues each with molecular weight M - {N ·M} normalized value of C₀{N. M} - _{0 i} normalized value of C ₀ {M} at the i-th iteration of a finite difference method - C ₀ {M} mol/m³ da initial concentration of substrate of molecular weight M - C _tot mol/m³ (constant) overall concentration of substrates (discrete model) - C _tot mol/m³ (constant) overall concentration of substrates (continuous model) - D deviation of the continuous approach relative to the discrete approach - i dummy integer variable - I arbitrary integration constant - j dummy integer variable - k dummy integer variable - K _m mol/m³ Michaëlis-Menten constant for the substrates - l dummy integer variable - M da molecular weight of substrate - M normalized value of M - M da maximum molecular weight of a reacting substrate - N number of monomer residues of a reacting substrate - N maximum number of monomer residues of a reacting substrate - N total number of increments for the finite difference method - Q m³/s volumetric flow rate of liquid through the reactor - S inert product molecule - S _i substrate containing i monomer residues - V m³ volume of the reactor - v _max mol/m³ s reaction rate under saturating conditions of the enzyme active site with substrate - v _max{N. M} mol/m³ s reaction rate under saturating conditions of the enzyme active site with substrate containing N monomer residues with molecular weight M - _max{N · M} dimensionless value of v_max{N. M} (discrete model) - _max{M} dimensionless value of v _max {M} (continuous model) - mol/m³ s molecular weight-averaged value of v_max (discrete model) - mol.da/m³s molecular weight-averaged value of v_max (continuous model) - v _max {M} mol.da/m³s reaction rate under saturating conditions of the enzyme active site with substrate with molecular weight M - _max {M} dimensionless value of v_max{M} - _{max, (i)} dimensionless value of v_max{M} at the i-th iteration of a finite difference method - v _max mol/m³ s reference constant value of v _max Greek Symbols dimensionless operating parameter (discrete distribution) - dimensionless operating parameter (continuous distribution) - M da (average) molecular weight of a monomeric subunit - M selected increment for the finite difference method - auxiliary corrective factor (discrete model)