Site-directed mutagenesis of the yeast PRP20/1SRM1 gene reveals distinct activity domains in the protein product

Prp20/Srm1, a homolog of the mammalian protein RCC1 in Saccharomyces cerevisiae, binds to double-stranded DNA (dsDNA) through a multicomponent complex in vitro. This dsDNA-binding capability of the Prp20 complex has been shown to be cell-cycle dependent; affinity for dsDNA is lost during DNA replication. By analyzing a number of temperature sensitive (ts) prp20 alleles produced in vivo and in vitro, as well as site-directed mutations in highly conserved positions in the imperfect repeats that make up the protein, we have determined a relationship between the residues at these positions, cell viability, and the dsDNA-binding abilities of the Prp20 complex. These data reveal that the essential residues for Prp20 function are located mainly in the second and the third repeats at the amino-terminus and the last two repeats, the seventh and eighth, at the carboxyl-terminus of Prp20. Carboxyl-terminal mutations in Prp20 differ from amino-terminal mutations in showing loss of dsDNA binding: their conditional lethal phenotype and the loss of dsDNA binding affinity are both suppressible by overproduction of Gsp1, a GTP-binding constituent of the Prp20 complex, homologous to the mammalian protein TC4/Ran. Although wild-type Prp20 does not bind to dsDNA on its own, two mutations in conserved residues were found that caused the isolated protein to bind dsDNA. These data imply that, in situ, the other components of the Prp20 complex regulate the conformation of Prp20 and thus its affinity for dsDNA. Gsp1 not only influences the dsDNA-binding ability of Prp20 but it also regulates other essential function(s) of the Prp20 complex. Overproduction of Gsp1 also suppresses the lethality of two conditional mutations in the penultimate carboxyl-terminal repeat of Prp20, even though these mutations do not eliminate the dsDNA binding activity of the Prp20 complex. Other site-directed mutants reveal that internal and carboxyl-terminal regions of Prp20 that lack homology to RCC1 are dispensable for dsDNA binding and growth.     

Phylogeny of Saxifraga section Saxifraga subsection Arachnoideae (Saxifragaceae) and the origin of low elevation shade-dwelling species

Saxifraga section Saxifraga subsection Arachnoideae is a lineage of 12 species distributed mainly in the European Alps. It is unusual in terms of ecological diversification by containing both high elevation species from exposed alpine habitats and low elevation species from shady habitats such as overhanging rocks and cave entrances. Our aims are to explore which of these habitat types is ancestral, and to identify the possible drivers of this remarkable ecological diversification. Using a Hybseq DNA-sequencing approach and a complete species sample we reconstructed and dated the phylogeny of subsection Arachnoideae. Using Landolt indicator values, this phylogenetic tree was used for the reconstruction of the evolution of temperature, light and soil pH requirements in this lineage. Diversification of subsection Arachnoideae started in the late Pliocene and continued through the Pleistocene. Both diversification among and within clades was largely allopatric, and species from shady habitats with low light requirements are distributed in well-known refugia. We hypothesize that low light requirements evolved when species persisting in cold-stage refugia were forced into marginal habitats by more competitive warm-stage vegetation. While we do not claim that such competition resulted in speciation, it very likely resulted in adaptive evolution.     

Comparative LCA studies of simulated HMF biorefineries from maize and miscanthus as an example of first- and second-generation biomass as a tool for process development

5-Hydroxymethylfurfural (HMF) is a versatile platform chemical for a fossil free, bio-based chemical industry. HMF can be produced by using fructose as a feedstock. Using edible, first-generation biomass to produce chemicals has been questioned in terms of potential competition with food supply. Second-generation biomass like miscanthus could be an alternative. However, there is a lack of information if second-generation lignocellulosic biomass is a more sustainable feedstock to produce HMF. Therefore, a life cycle assessment was performed in this study to determine the environmental impacts of HMF production from miscanthus and to compare it with HMF from high-fructose corn syrup (HFCS). HFCS from either Hungary or Baden-Württemberg (Germany) was considered. Compared to the HFCS biorefineries the miscanthus concept is producing less emissions in all impact categories studied, except land occupation. Overall, the production and usage of second-generation biomass could be especially beneficial in areas where the use of N fertilizers is restricted. Besides, conclusions for the further development of the on-farm biorefinery concept were elaborated. For this purpose, process simulations from a previous study were used. Results of the previous study in terms of TEA and the current LCA study in terms of environmental sustainability indicate that the lignin depolymerization unit in the miscanthus biorefinery has to be improved. The scenario without lignin depolymerization performs better in all impact categories. The authors recommend to not further convert the lignin to products like phenol and other aromatic compounds. The results of the contribution analyses show that the major impact in the HMF production is caused by the auxiliary materials in the separation units and the required heat. Further technical development should focus on efficient heat as well as solvent use and solvent recovery. At this point further optimizations will lead to reduced emissions and costs at the same time.     

Heritability of adult body height: a comparative study of twin cohorts in eight countries.

A major component of variation in body height is due to genetic differences, but environmental factors have a substantial contributory effect. In this study we aimed to analyse whether the genetic architecture of body height varies between affluent western societies. We analysed twin data from eight countries comprising 30,111 complete twin pairs by using the univariate genetic model of the Mx statistical package. Body height and zygosity were self-reported in seven populations and measured directly in one population. We found that there was substantial variation in mean body height between countries; body height was least in Italy (177 cm in men and 163 cm in women) and greatest in the Netherlands (184 cm and 171 cm, respectively). In men there was no corresponding variation in heritability of body height, heritability estimates ranging from 0.87 to 0.93 in populations under an additive genes/unique environment (AE) model. Among women the heritability estimates were generally lower than among men with greater variation between countries, ranging from 0.68 to 0.84 when an additive genes/shared environment/unique environment (ACE) model was used. In four populations where an AE model fit equally well or better, heritability ranged from 0.89 to 0.93. This difference between the sexes was mainly due to the effect of the shared environmental component of variance, which appears to be more important among women than among men in our study populations. Our results indicate that, in general, there are only minor differences in the genetic architecture of height between affluent Caucasian populations, especially among men.     

Electron spin-lattice relaxation of the [Cu(1.5) ... Cu(1.5)] dinuclear copper center in nitrous oxide reductase.

Relaxation times have been obtained with time-domain EPR for the dinuclear mixed valence [CuA(1.5) ... CuA(1.5)[ S = 1/2 center in nitrous oxide reductase, N2OR, from Pseudomonas stutzeri, in the TN5 mutant defective in copper chromophore biosynthesis, in a synthetic mixed valence complex, and in type 1 and 2 copper complexes. Data confirmed that the intrinsic electron spin-lattice relaxation time, T1, for N2OR in the temperature range of 6-25 K is unusually short for copper centers. At best, a twofold increase of T1 from g perpendicular to g parallel was measured. Optimized fits of the saturation-recovery data were obtained using both double-exponential and stretched-exponential functions. The temperature dependence of the spin-lattice relaxation rate of mutant N2OR is about T5.0 with the stretched-exponential model or T3.3 and T3.9 for the model using the sum of two exponentials. These T1s are intrinsic to the mixed valence [CuA(1.5) ... CuA(1.5)] center, and no interaction of the second copper center in wild-type N2OR with the [CuA(1.5) ... CuA(1.5)] center has been observed. The T1 of the mixed valence center of N2OR is not only shorter than for monomeric square planar Cu(II) complexes, but also shorter than for a synthetic mixed valence complex, Cu2(N[CH2CH2NHCH2CH2NHCH2CH2]3N). The short T1 is attributed to the vibrational modes of type 1 copper and/or the metal-metal interaction in [CuA(1.5) ... CuA(1.5)].     

HPLC shadowing: Artifacts in peptide characterization monitored by RIA

High performance liquid chromatography (HPLC), a valuable tool for characterization of peptides, is frequently used in combination with sensitive radioimmunoassays (RIA). The shadow phenomenon, representing carry-over of the peptide from previous application of the standard, can appear to result in the presence of endogenous peptide in the test sample when none is actually there. With delta sleep-inducing peptide (DSIP), we found the shadowing to be as high as 10%, although it was only 1% with ¹²⁵I-Tyr-DSIP. Thus, when HPLC-RIA systems are used for identification of peptides, caution must be used to avoid false positive results.     

Non-aceticlastic methanogenesis from acetate: acetate oxidation by a thermophilic syntrophic coculture

Methanogenesis from acetate by a rod-shaped enrichment culture grown at 60° C was found to require the presence of two organisms rather than a single aceticlastic methanogen. A thermophilic Methanobacterium which grew on H₂/CO₂ or formate was isolated from the enrichment. Lawns of this methanogen were used to co-isolate an acetate oxidizer in roll tubes containing acetate agar. The rod-shaped acetate oxidizer was morphologically distinct from the methanogen and did not show F₄₂₀ autofluorescence. The coculture completely degraded 40 mol/ml acetate, and produced nearly equal quantities of methane, and methanogenesis was coupled with growth. The doubling time for the coculture at 60°C was 30–40 h and the yield was 2.7±0.3 g dry wt/mol CH₄. Studies with ¹⁴C-labelled substrates showed that the methyl group and the carboxyl group of acetate were both converted primarily to CO₂ by the coculture and that CO₂ was concurrently reduced to CH₄. During growth, there was significant isotopic exchange between CO₂ and acetate, especially with thecarboxyl position of acetate. These results support a mechanism for methanogenesis from acetate by the coculture in which acetate was oxidized to CO₂ and H₂ by one organism, while H₂ was subsequently used by a second organism to reduce CO₂ to CH₄. Since the H₂ partial pressure must be maintained below 10^-4 atm by the methanogen for acetate oxidation to be thermodynamically feasible, this is an example of obligate interspecies hydrogen transfer. This mechanism was originally proposed for a single organism by Barker in 1936.     

Analysis of progress curves. Rate law of pyruvate kinase type I from Escherichia coli.

Progress curves of the reaction catalysed by pyruvate kinase from Escherichia coli K12, designed to cover the four-dimensional concentration space of phosphoenolpyruvate, ADP, Mg2+ and ATP in the regulatory region, were recorded with the pH-stat method (pH 7.0 and 25 degrees C). Additional initial-rate measurement were performed to assess specific points. Two methods for the evaluation of progress curves were used: fitting the rate law to the rates obtained from the tangents of the progress curves and fitting the integrated rate law directly to the curves. Two models, both extensions of the concerted model given by Monod, Wyman & Changeux [(1965) J. Mol. Biol. 12, 88--118] with four protomers, could be fitted to the data within the experimental error. Model discrimination in favour of one of these models was possible by proper experimental design. In the selected model one conformational state of the enzyme forms the active complex. The active site of a second conformational state forms abortive complexes with Mg2+, causing strong inhibition at high Mg2+ concentrations. In the absence of ligands, most of the enzyme is in a third state that binds ATP at an allosteric site.