Controlled modulation of folate polyglutamyl tail length by metabolic engineering of Lactococcus lactis

The dairy starter bacterium Lactococcus lactis is able to synthesize folate and accumulates >90% of the produced folate intracellularly, predominantly in the polyglutamyl form. Approximately 10% of the produced folate is released into the environment. Overexpression of folC in L. lactis led to an increase in the length of the polyglutamyl tail from the predominant 4, 5, and 6 glutamate residues in wild-type cells to a maximum of 12 glutamate residues in the folate synthetase overproducer and resulted in a complete retention of folate in the cells. Overexpression of folKE, encoding the bifunctional protein 2-amino-4-hydroxy-6-hydroxymethyldihydropteridine pyrophosphokinase and GTP-cyclohydrolase I, resulted in reduction of the average polyglutamyl tail length, leading to enhanced excretion of folate. By simultaneous overexpression of folKE and folC, encoding the enzyme folate synthetase or polyglutamyl folate synthetase, the average polyglutamyl tail length was increased, again resulting in normal wild-type distribution of folate. The production of bioavailable monoglutamyl folate and almost complete release of folate from the bacterium was achieved by expressing the gene for gamma-glutamyl hydrolase from human or rat origin. These engineering studies clearly establish the role of the polyglutamyl tail length in intracellular retention of the folate produced. Also, the potential application of engineered food microbes producing folates with different tail lengths is discussed.     

Increased production of folate by metabolic engineering of Lactococcus lactis

The dairy starter bacterium Lactococcus lactis is able to synthesize folate and accumulates large amounts of folate, predominantly in the polyglutamyl form. Only small amounts of the produced folate are released in the extracellular medium. Five genes involved in folate biosynthesis were identified in a folate gene cluster in L. lactis MG1363: folA, folB, folKE, folP, and folC. The gene folKE encodes the biprotein 2-amino-4-hydroxy-6-hydroxymethyldihydropteridine pyrophosphokinase and GTP cyclohydrolase I. The overexpression of folKE in L. lactis was found to increase the extracellular folate production almost 10-fold, while the total folate production increased almost 3-fold. The controlled combined overexpression of folKE and folC, encoding polyglutamyl folate synthetase, increased the retention of folate in the cell. The cloning and overexpression of folA, encoding dihydrofolate reductase, decreased the folate production twofold, suggesting a feedback inhibition of reduced folates on folate biosynthesis.     

Crystal structure of the human vascular adhesion protein-1: unique structural features with functional implications

The expression of human vascular adhesion protein-1 (hVAP-1) is induced at sites of inflammation where extravasation of lymphocytes from blood to the peripheral tissue occurs. We have solved the X-ray structure of hVAP-1, a human copper amine oxidase (CAO), which is distinguished from other CAOs in being membrane-bound. The dimer structure reveals some intriguing features that may have fundamental roles in the adhesive and enzymatic functions of hVAP-1, especially regarding the role of hVAP-1 in inflammation, lymphocyte attachment, and signaling. Firstly, Leu469 at the substrate channel may play a key role in controlling the substrate entry; depending on its conformation, it either blocks or gives access to the active site. Secondly, sugar units are clearly observed at two of the six predicted N-glycosylation sites. Moreover, mutagenesis analysis showed that all of the predicted sites were glycosylated in the protein used for crystallization. Thirdly, the existence of a solvent-exposed RGD motif at the entrance to each active site in hVAP-1 suggests that it may have a functional role.     

Gene regulatory potential of nonsteroidal vitamin D receptor ligands

The seco-steroid 1alpha,25-dihydroxyvitamin D3 [1alpha,25(OH)2D3] is a promising drug candidate due to its pleiotropic function including the regulation of calcium homeostasis, bone mineralization and cellular proliferation, differentiation, and apoptosis. We report here a novel class of nonsteroidal compounds, represented by the bis-aromatic molecules CD4409, CD4420, and CD4528, as ligands of the 1alpha,25(OH)2D3 receptor (VDR). Taking the known diphenylmethane derivative LG190178 as a reference, this study provides molecular evaluation of the interaction of nonsteroidal ligands with the VDR. All four nonsteroidal compounds were shown to induce VDR-retinoid X receptor heterodimer complex formation on a 1alpha,25(OH)2D3 response element, stabilize the agonistic conformation of the VDR ligand-binding domain, enable the interaction of VDR with coactivator proteins and contact with their three hydroxyl groups the same residues within the ligand-binding pocket of the VDR as 1alpha,25(OH)2D3. Molecular dynamics simulations demonstrated that all four nonsteroidal ligands take a shape within the ligand-binding pocket of the VDR that is very similar to that of the natural ligand. CD4528 is mimicking the natural hormone best and was found to be in vitro at least five times more potent than LG190178. In living cells, CD4528 was only two times less potent than 1alpha,25(OH)2D3 and induced mRNA expression of the VDR target gene CYP24 in a comparable fashion. At a noncalcemic dose of 150 microg/kg, CD4528 showed in vivo a clear induction of CYP24 expression and therefore may be used as a lead compound for the development of therapeutics against psoriasis, osteoporosis, and cancer.     

Dual-affinity avidin molecules

A recently reported dual-chain avidin was modified further to contain two distinct, independent types of ligand-binding sites within a single polypeptide chain. Chicken avidin is normally a tetrameric glycoprotein that binds water-soluble d-biotin with extreme affinity (K(d) approximately 10(-15) M). Avidin is utilized in various applications and techniques in the life sciences and in the nanosciences. In a recent study, we described a novel avidin monomer-fusion chimera that joins two circularly permuted monomers into a single polypeptide chain. Two of these dual-chain avidins were observed to associate spontaneously to form a dimer equivalent to the wt tetramer. In the present study, we successfully used this scaffold to generate avidins in which the neighboring biotin-binding sites of dual-chain avidin exhibit two different affinities for biotin. In these novel avidins, one of the two binding sites in each polypeptide chain, the pseudodimer, is genetically modified to have lower binding affinity for biotin, whereas the remaining binding site still exhibits the high-affinity characteristic of the wt protein. The pseudotetramer (i.e., a dimer of dual-chain avidins) has two high and two lower affinity biotin-binding sites. The usefulness of these novel proteins was demonstrated by immobilizing dual-affinity avidin with its high-affinity sites. The sites with lower affinity were then used for affinity purification of a biotinylated enzyme. These "dual-affinity" avidin molecules open up wholly new possibilities in avidin-biotin technology, where they may have uses as novel bioseparation tools, carrier proteins, or nanoscale adapters.     

Environmental conditions and host genotype direct genetic diversity of Venturia ditricha,a fungal endophyte of birch trees

We investigated whether genetic variation of a common foliar endophyte of birch trees, Venturia ditricha, is affected by environmental conditions or host genotype. Fungal samples were collected from 10 half-sibling families of mountain birch (Betula pubescens ssp. czerepanovii) grown in two environmental conditions with different daily average temperatures: a forested river valley and an adjacent open tundra (altitudinal difference 180 m). Genetic analysis of V. ditricha isolates was done using random amplified microsatellite polymerase chain reaction. We found that host genotypes, along with prevailing environmental conditions, influence the probability of infection by particular endophyte genotypes. The most susceptible host genotypes were highly infected with genetically similar endophyte genotypes, whereas the most resistant trees were poorly infected and they were infected by genetically dissimilar endophytes. Our results also showed environment-host genotype interactions, suggesting that the susceptibility of the host to a particular endophyte genotype may change in natural environments when environmental conditions are changed. It appears that a particular endophyte genotype needs to find the right host genotype for a successful infection. There are many host genotypes in natural stands; this means, from the point of view of the fungus, the environment is heterogeneous. Thus, under the influence of birch tree genotypes, genetically differentiated subgroups of the endophytic fungus may be formed in different environments.     

Characterization of a de novo conversion in human complement C4 gene producing a C4B5-like protein

Complement C4 is a highly polymorphic protein essential for the activation of the classical complement pathway. Most of the allelic variation of C4 resides in the C4d region. Four polymorphic amino acid residues specify the isotype and an additional four specify the Rodgers and Chido determinants of the protein. Rare C4 allotypes have been postulated to originate from recombination between highly homologous C4 genes through gene conversions. Here we describe the development of a de novo C4 hybrid protein with allotypic and antigenic diversity resulting from nonhomologous intra or interchromosomal recombination of the maternal chromosomes. A conversion was observed between maternal C4A3a and C4B1b genes producing a functional hybrid gene in one of the children. The codons determining the isotype, Asp(1054), Leu(1101), Ser(1102), Ile(1105) and His(1106), were characteristic of C4B gene, whereas the polymorphic sites in exon and intron 28 were indicative of C4A3a sequence. The protein produced by this hybrid gene was electrophoretically similar to C4B5 allotype. It also possesses reversed antigenicity being Rodgers 1, 2, 3 and Chido-1, -2, -3, 4, -5, and -6. Our case describes the development of a rare bimodular C4B-C4B haplotype containing a functional de novo C4 hybrid gene arisen through gene conversion from C4A to C4B. Overall the data supports the hypothesis of gene conversions as an ongoing process increasing allelic diversity in the C4 locus.     

Production of Hev b5 as a fluorescent biotin-binding tripartite fusion protein in insect cells

The presented green fluorescent protein and streptavidin core-based tripartite fusion system provides a simple and efficient way for the production of proteins fused to it in insect cells. This fusion protein forms a unique tag, which serves as a multipurpose device enabling easy optimization of production, one-step purification via streptavidin-biotin interaction, and visualization of the fusion protein during downstream processing and in applications. In the present study, we demonstrate the successful production, purification, and detection of a natural rubber latex allergen Hev b5 with this system. We also describe the production of another NRL allergen with the system, Hev b1, which formed large aggregates and gave small yields in purification. The aggregates were detected at early steps by microscopical inspection of the infected insect cells producing this protein. Therefore, this fusion system can also be utilized as a fast indicator of the solubility of the expressed fusion proteins and may therefore be extremely useful in high-throughput expression approaches.     

Design and construction of highly stable, protease-resistant chimeric avidins

The chicken avidin gene family consists of avidin and seven separate avidin-related genes (AVRs) 1-7. Avidin protein is a widely used biochemical tool, whereas the other family members have only recently been produced as recombinant proteins and characterized. In our previous study, AVR4 was found to be the most stable biotin binding protein thus far characterized (T(m) = 106.4 degrees C). In this study, we studied further the biotin-binding properties of AVR4. A decrease in the energy barrier between the biotin-bound and unbound state of AVR4 was observed when compared with that of avidin. The high resolution structure of AVR4 facilitated comparison of the structural details of avidin and AVR4. In the present study, we used the information obtained from these comparative studies to transfer the stability and functional properties of AVR4 to avidin. A chimeric avidin protein, ChiAVD, containing a 21-amino acid segment of AVR4 was found to be significantly more stable (T(m) = 96.5 degrees C) than native avidin (T(m) = 83.5 degrees C), and its biotin-binding properties resembled those of AVR4. Optimization of a crucial subunit interface of avidin by an AVR4-inspired point mutation, I117Y, significantly increased the thermostability of the avidin mutant (T(m) = 97.5 degrees C) without compromising its high biotin-binding properties. By combining these two modifications, a hyperthermostable ChiAVD(I117Y) was constructed (T(m) = 111.1 degrees C). This study provides an example of rational protein engineering in which another member of the protein family has been utilized as a source in the optimization of selected properties.