A Pragmatic Approach to Assess the Exposure of the Honey Bee (Apis mellifera) When Subjected to Pesticide Spray

Plant protection spray treatments may expose non-target organisms to pesticides. In the pesticide registration procedure, the honey bee represents one of the non-target model species for which the risk posed by pesticides must be assessed on the basis of the hazard quotient (HQ). The HQ is defined as the ratio between environmental exposure and toxicity. For the honey bee, the HQ calculation is not consistent because it corresponds to the ratio between the pesticide field rate (in mass of pesticide/ha) and LD₅₀ (in mass of pesticide/bee). Thus, in contrast to all other species, the HQ can only be interpreted empirically because it corresponds to a number of bees/ha. This type of HQ calculation is due to the difficulty in transforming pesticide field rates into doses to which bees are exposed. In this study, we used a pragmatic approach to determine the apparent exposure surface area of honey bees submitted to pesticide treatments by spraying with a Potter-type tower. The doses received by the bees were quantified by very efficient chemical analyses, which enabled us to determine an apparent surface area of 1.05 cm²/bee. The apparent surface area was used to calculate the exposure levels of bees submitted to pesticide sprays and then to revisit the HQ ratios with a calculation mode similar to that used for all other living species. X-tomography was used to assess the physical surface area of a bee, which was 3.27 cm²/bee, and showed that the apparent exposure surface was not overestimated. The control experiments showed that the toxicity induced by doses calculated with the exposure surface area was similar to that induced by treatments according to the European testing procedure. This new approach to measure risk is more accurate and could become a tool to aid the decision-making process in the risk assessment of pesticides.     

A Link between Arabinose Utilization and Oxalotrophy in Bradyrhizobium japonicum

Rhizobia have a versatile catabolism that allows them to compete successfully with other microorganisms for nutrients in the soil and in the rhizosphere of their respective host plants. In this study, Bradyrhizobium japonicum USDA 110 was found to be able to utilize oxalate as the sole carbon source. A proteome analysis of cells grown in minimal medium containing arabinose suggested that oxalate oxidation extends the arabinose degradation branch via glycolaldehyde. A mutant of the key pathway genes oxc (for oxalyl-coenzyme A decarboxylase) and frc (for formyl-coenzyme A transferase) was constructed and shown to be (i) impaired in growth on arabinose and (ii) unable to grow on oxalate. Oxalate was detected in roots and, at elevated levels, in root nodules of four different B. japonicum host plants. Mixed-inoculation experiments with wild-type and oxc-frc mutant cells revealed that oxalotrophy might be a beneficial trait of B. japonicum at some stage during legume root nodule colonization.     

Syndecans promote integrin-mediated adhesion of mesenchymal cells in two distinct pathways

Syndecans are transmembrane proteoglycans that support integrin-mediated adhesion. Well documented is the contribution of syndecan-4 that interacts through its heparan sulphate chains to promote focal adhesion formation in response to fibronectin domains. This process has requirements for integrin and signaling through the cytoplasmic domain of syndecan-4. Here an alternate pathway mediated by the extracellular domains of syndecans-2 and -4 is characterized that is independent of both heparan sulphate and syndecan signaling. This pathway is restricted to mesenchymal cells and was not seen in any epithelial cell line tested, apart from vascular endothelia. The syndecan ectodomains coated as substrates promoted integrin-dependent attachment, spreading and focal adhesion formation. Syndecan-4 null cells were competent, as were fibroblasts compromised in heparan sulphate synthesis that were unable to form focal adhesions in response to fibronectin. Consistent with actin cytoskeleton organization, the process required Rho-GTP and Rho kinase. While syndecan-2 and -4 ectodomains could both promote integrin-mediated adhesion, their pathways were distinct, as shown by competition assays. Evidence for an indirect interaction of beta1 integrin with both syndecan ectodomains was obtained, all of which suggests a distinct mechanism of integrin-mediated adhesion.     

Synthesis, liposomal preparation, and in vitro toxicity of two novel dodecaborate cluster lipids for boron neutron capture therapy

A new class of lipids, containing the closo-dodecaborate cluster, has been synthesized. Two lipids, S-(N, N-(2-dimyristoyloxyethyl)acetamido)thioundecahydro-closo-dodecaborate (2-) (B-6-14) and S-(N, N-(2-dipalmitoyloxyethyl)acetamido)thioundecahydro-closo-dodecaborate (2-) (B-6-16) are described. Both of them have a double-tailed lipophilic part and a headgroup carrying two negative charges. Differential scanning calorimetry shows that B-6-14 and B-6-16 bilayers have main phase transition temperatures of 18.8 and 37.9 degrees C, respectively. Above the transition temperature of 18.8 degrees C, B-6-14 can form liposomal vesicles, representing the first boron-containing lipid with this capability. Upon cooling below the transition temperature, stiff bilayers are formed. When incorporated into liposomal formulations with equimolar amounts of distearoyl phosphatidylcholine (DSPC) and cholesterol, stable liposomes are obtained. The zeta-potential measurements indicate that both B-6-14- and B-6-16-containing vesicles are negatively charged, with the most negative potential described of any liposome so far. The liposomes are of high potential value as transporters of boron to tumor cells in treatments based on boron neutron capture therapy (BNCT). Liposomes prepared from B-6-14 were slightly less toxic in V79 Chinese hamster cells (IC50 5.6 mM) than unformulated Na2B12H11SH (IC50 3.9 mM), while liposomes prepared from B-6-16 were not toxic even at 30 mM.     

Enigma Prevents Cbl-c-Mediated Ubiquitination and Degradation of RETMEN2A

The Cbl proteins (Cbl, Cbl-b, and Cbl-c) are a highly conserved family of RING finger ubiquitin ligases (E3s) that function as negative regulators of tyrosine kinases in a wide variety of signal transduction pathways. In this study, we identify a new Cbl-c interacting protein, Enigma (PDLIM7). This interaction is specific to Cbl-c as Enigma fails to bind either of its closely related homologues, Cbl and Cbl-b. The binding between Enigma and Cbl-c is mediated through the LIM domains of Enigma as removal of all three LIM domains abrogates this interaction, while only LIM1 is sufficient for binding. Here we show that Cbl-c binds wild-type and MEN2A isoforms of the receptor tyrosine kinase, RET, and that Cbl-c enhances ubiquitination and degradation of activated RET. Enigma blocks Cbl-c-mediated RETMEN2A ubiquitination and degradation. Cbl-c decreased downstream ERK activation by RETMEN2A and co-expression of Enigma blocked the Cbl-c-mediated decrease in ERK activation. Enigma showed no detectable effect on Cbl-c-mediated ubiquitination of activated EGFR suggesting that this effect is specific to RET. Through mapping studies, we show that Cbl-c and Enigma bind RETMEN2A at different residues. However, binding of Enigma to RETMENA prevents Cbl-c recruitment to RETMEN2A. Consistent with these biochemical data, exploratory analyses of breast cancer patients with high expression of RET suggest that high expression of Cbl-c correlates with a good outcome, and high expression of Enigma correlates with a poor outcome. Together, these data demonstrate that Cbl-c can ubiquitinate and downregulate RETMEN2A and implicate Enigma as a positive regulator of RETMEN2A through blocking of Cbl-mediated ubiquitination and degradation.     

A Comparative Test of Mechanized and Manual Transplanting of Eelgrass, Zostera marina, in Chesapeake Bay

Abstract The laborious process of manual seagrass transplanting has often limited the size of seagrass restoration efforts. This study tested the efficiency of a mechanized planting boat, previously used for transplanting Halodule wrightii, relative to manual transplanting methods for establishing Zostera marina in Chesapeake Bay. Eelgrass planting was conducted at two sites, one each in the Rappahannock and James rivers, in October 2001. The methods were evaluated by three criteria: (1) initial planting success = proportion of attempted planting units (PUs) initially established (number confirmed in sediment by divers/number attempted); (2) survival = proportion of the initially established PUs persisting over 1, 4, and 24 weeks; and (3) efficiency = labor (in person·seconds) invested in each surviving PU. Initial planting success was significantly lower for the planting boat (24 and 56% at the Rappahannock and James sites, respectively) than for manual transplanting (100% at both sites). At the Rappahannock site, survival of initially established PUs declined over time for both methods, but while mean survival was always higher for manually planted rows, differences in survival between methods were not statistically significant. At the James site, survival to 1 and 4 weeks was significantly lower for the machine than for the manual method, but survival to 24 weeks was not significantly different. While the machine was able to attempt PUs faster than the manual method (2.2 s/PU vs. 5.8 s/PU, respectively), this speed was offset by poorer planting success rates, resulting in a much greater total labor investment for each machine‐planted PU that persisted to 24 weeks than for each similarly persisting manually planted PU (40.6 person·seconds/PU and 22.4 person·seconds/PU, respectively, averaged across sites). In summary, those PUs successfully planted by the machine survived similarly to PUs planted by hand, but as a result of poorer initial planting success, the machine required a greater investment of labor and plant donor stock for each PU surviving to 24 weeks. Therefore, in its tested configuration this planting boat is not a significant improvement over the manual method for transplanting eelgrass.