Elucidating the genetic basis of biomass accumulation and radiation use efficiency in spring wheat and its role in yield potential

One of the major challenges for plant scientists is increasing wheat (Triticum aestivum) yield potential (YP). A significant bottleneck for increasing YP is achieving increased biomass through optimization of radiation use efficiency (RUE) along the crop cycle. Exotic material such as landraces and synthetic wheat has been incorporated into breeding programmes in an attempt to alleviate this; however, their contribution to YP is still unclear. To understand the genetic basis of biomass accumulation and RUE, we applied genome‐wide association study (GWAS) to a panel of 150 elite spring wheat genotypes including many landrace and synthetically derived lines. The panel was evaluated for 31 traits over 2 years under optimal growing conditions and genotyped using the 35K wheat breeders array. Marker‐trait association identified 94 SNPs significantly associated with yield, agronomic and phenology‐related traits along with RUE and final biomass (BM_PM) at various growth stages that explained 7%–17% of phenotypic variation. Common SNP markers were identified for grain yield, BM_PM and RUE on chromosomes 5A and 7A. Additionally, landrace and synthetic derivative lines showed higher thousand grain weight (TGW), BM_PM and RUE but lower grain number (GM2) and harvest index (HI). Our work demonstrates the use of exotic material as a valuable resource to increase YP. It also provides markers for use in marker‐assisted breeding to systematically increase BM_PM, RUE and TGW and avoid the TGW/GM2 and BM_PM/HI trade‐off. Thus, achieving greater genetic gains in elite germplasm while also highlighting genomic regions and candidate genes for further study.     

Adaptation of the toxic freshwater cyanobacterium Microcystis aeruginosa to salinity is achieved by the selection of spontaneous mutants

The cyanobacterium Microcystis aeruginosa causes most of the harmful toxic blooms in freshwater ecosystems. Some strains of M. aeruginosa tolerate low‐medium levels of salinity, and because salinization of freshwater aquatic systems is increasing worldwide it is relevant to know what adaptive mechanisms allow tolerance to salinity. The mechanisms involved in the adaptation of M. aeruginosa to salinity (acclimation vs. genetic adaptation) were tested by a fluctuation analysis design, and then the maximum capacity of adaptation to salinity was studied by a ratchet protocol experiment. Whereas a dose of 10 g NaCl L^?1 completely inhibited the growth of M. aeruginosa, salinity‐resistant genetic variants, capable of tolerating up to 14 g NaCl L^?1, were isolated in the fluctuation analysis experiment. The salinity‐resistant cells arose by spontaneous mutations at a rate of 7.3 × 10^?7 mutants per cell division. We observed with the ratchet protocol that three independent culture populations of M. aeruginosa were able to adapt to up to 15.1 g L^?1 of NaCl, suggesting that successive mutation‐selection processes can enhance the highest salinity level to which M. aeruginosa cells can initially adapt. We propose that increasing salinity in water reservoirs could lead to the selection of salinity‐resistant mutants of M. aeruginosa.     

Serum ferritin as a candidate diagnostic biomarker of polycystic ovarian syndrome: a meta-analysis

Objective: In this study, we investigated about the potential of serum ferritin as a complementary diagnostic biomarker of polycystic ovarian syndrome (PCOS) by performing a meta-analysis of existing literature.

Materials and methods: Eleven studies written in English were retrieved up to 30 June 2018. Data were extracted from the selected studies by two of the authors and was subjected to statistical analysis. Levels of serum ferritin were compared between women with PCOS and controls using the standardized mean difference (SMD) and 95% confidence interval (CI). Subgroup analysis was also performed and stratified by ethnicity (Asians versus Caucasians).

Results: Overall post-outlier outcomes indicated that elevated serum ferritin is strongly associated with PCOS (SMD: 0.52; 95% CI: 0.40–0.64; P^A?=?10^?5). Subgroup analysis by ethnicity showed no significant difference between Asian and Caucasian population. Post-outlier receiving operations characteristics curve were plotted and showed that values for serum ferritin showed good potential in discriminating patients with and without PCOS (AUC?=?0.827, p?=?0.006).

Conclusion: Our findings suggest that high serum ferritin level is significantly associated with PCOS and its potential as a biomarker is evident in its high diagnostic accuracy. However, additional studies are needed to confirm our claims.     

Assessing variability in carbon footprint throughout the food supply chain: a case study of Valencian oranges

The International Journal of Life Cycle Assessment - This study aims to analyse the variability in the carbon footprint (CF) of organically and conventionally produced Valencian oranges (Spain),...     

Exploration of Ellsworth Subglacial Lake: a concept paper on the development, organisation and execution of an experiment to explore, measure and sample the environment of a West Antarctic subglacial lake

Antarctic subglacial lakes have, over the past few years, been hypothesised to house unique forms of life and hold detailed sedimentary records of past climate change. Testing this hypothesis requires in situ examinations. The direct measurement of subglacial lakes has been considered ever since the largest and best-known lake, named Lake Vostok, was identified as having a deep water-column. The Subglacial Antarctic Lake Environments (SALE) programme, set up by the Scientific Committee on Antarctic Research (SCAR) to oversee subglacial lakes research, state that prior exploration of smaller lakes would be a “prudent way forward”. Over 145 subglacial lakes are known to exist in Antarctica, but one lake in West Antarctica, officially named Ellsworth Subglacial Lake (referred to hereafter as Lake Ellsworth), stands out as a candidate for early exploration. A consortium of over 20 scientists from seven countries and 14 institutions has been assembled to plan the exploration of Lake Ellsworth. An eight-year programme is envisaged: 3 years for a geophysical survey, 2 years for equipment development and testing, 1 year for field planning and operation, and 2 years for sample analysis and data interpretation. The science experiment is simple in concept but complex in execution. Lake Ellsworth will be accessed using hot water drilling. Once lake access is achieved, a probe will be lowered down the borehole and into the lake. The probe will contain a series of instruments to measure biological, chemical and physical characteristics of the lake water and sediments, and will utilise a tether to the ice surface through which power, communication and data will be transmitted. The probe will pass through the water column to the lake floor. The probe will then be pulled up and out of the lake, measuring its environment continually as this is done. Once at the ice surface, any water samples collected will be taken from the probe for laboratory analysis (to take place over subsequent years). The duration of the science mission, from deployment of the probe to its retrieval, is likely to take between 24 and 36 h. Measurements to be taken by the probe will provide data about the following: depth, pressure, conductivity and temperature; pH levels; biomolecules (using life marker chips); anions (using a chemical analyzer); visualisation of the environment (using cameras and light sources); dissolved gases (using chromatography); and morphology of the lake floor and sediment structures (using sonar). After the probe has been retrieved, a sediment corer may be dropped into the lake to recover material from the lake floor. Finally, if time permits, a thermistor string may be left in the lake water to take time-dependent measurements of the lake’s water column over subsequent years. Given that the comprehensive geophysical survey of the lake will take place in two seasons during 2007–2009, a two-year instrument and logistic development phase from 2008 (after the lake’s bathymetry has been assessed) makes it possible that the exploration of Lake Ellsworth could take place at the beginning of the next decade.     

Resilient sensor authentication in SCADA by integrating physical unclonable function and blockchain

Industrial Control Systems and Supervisory Control and Data Acquisition (ICS/SCADA) systems are profound backbones of the national critical infrastructures and are essential to the sustainability of society since they help monitoring and controlling the cyber-enable services, such as energy, transportation, healthcare, etc. Modern SCADA systems continue to use the legacy communication protocols that lack adequate security mechanisms to provide trusted device authentication and ensure data flow integrity. Furthermore, advent of state-of-the-art network-capable sensor technology exposes many unique vulnerabilities to the adversaries. Thus, integrity of the data originated from field sensors along with their identity must be managed carefully in order to enhance reliability of ICS/SCADA ecosystems. In this paper, we present a blockchain-based SRAM PUF Authentication and Integrity (BloSPAI) protocol that aims to ensure a continuous authentication of field sensors and provide a robust data flow integrity process by leveraging distributed ledger and hardware security primitives. The prototype of the protocol has been implemented in a sensor-integrated Raspberry PI testbed that is interfaced with a permissioned blockchain network. We discuss the performance and overhead aspects of the proposed BloSPAI protocol and compare with state-of-art cybersecurity solutions. Through experimental evaluation demonstrates the relationship between the size of the blockchain network impacts the throughput in terms of time to commit transactions and overall systems setup time.

     

Thermal niche variation among individuals of the poison frog,Oophaga pumilio,in forest and converted habitats

The conversion of natural habitats to human land uses often increases local temperatures, creating novel thermal environments for species. The variable responses of ectotherms to habitat conversion, where some species decline while others persist, can partly be explained by variation among species in their thermal niches. However, few studies have examined thermal niche variation within species and across forest‐land use ecotones, information that could provide clues about the capacity of species to adapt to changing temperatures. Here, we quantify individual‐level variation in thermal traits of the tropical poison frog, Oophaga pumilio, in thermally contrasting habitats. Specifically, we examined local environmental temperatures, field body temperatures (T_b), preferred body temperatures (T_pref), critical thermal maxima (CT_max), and thermal safety margins (TSM) of individuals from warm, converted habitats and cool forests. We found that frogs from converted habitats exhibited greater mean T_b and T_pref than those from forests. In contrast, CT_max and TSM did not differ significantly between habitats. However, CT_max did increase moderately with increasing T_b, suggesting that changes in CT_max may be driven by microscale temperature exposure within habitats rather than by mean habitat conditions. Although O. pumilio exhibited moderate divergence in T_pref, CT_max appears to be less labile between habitats, possibly due to the ability of frogs in converted habitats to maintain their T_b below air temperatures that reach or exceed CT_max. Selective pressures on thermal tolerances may increase, however, with the loss of buffering microhabitats and increased frequency of extreme temperatures expected under future habitat degradation and climate warming. Abstract in Spanish is available with online material.     

A field portable method for the semi‐quantitative estimation of dehydration tolerance of photosynthetic tissues across distantly related land plants

Desiccation tolerant (DT) plants withstand complete cellular dehydration, reaching relative water contents (RWC) below 30% in their photosynthetic tissues. Desiccation sensitive (DS) plants exhibit different degrees of dehydration tolerance (DHT), never surviving water loss >70%. To date, no procedure for the quantitative evaluation of DHT extent exists that is able to discriminate DS species with differing degrees of DHT from truly DT plants. We developed a simple, feasible and portable protocol to differentiate between DT and different degrees of DHT in the photosynthetic tissues of seed plants and between fast desiccation (< 24 h) tolerant (FDT) and sensitive (FDS) bryophytes. The protocol is based on (1) controlled desiccation inside Falcon tubes equilibrated at three different relative humidities that, consequently, induce three different speeds and extents of dehydration and (2) an evaluation of the average percentage of maximal photochemical efficiency of PSII (F_v/fm) recovery after rehydration. Applying the method to 10 bryophytes and 28 tracheophytes from various locations, we found that (1) imbibition of absorbent material with concentrated salt‐solutions inside the tubes provides stable relative humidity and avoids direct contact with samples; (2) for 50 ml capacity tubes, the optimal plant amount is 50–200 mg fresh weight; (3) the method is useful in remote locations due to minimal instrumental requirements; and (4) a threshold of 30% recovery of the initial F_v/fm upon reaching RWC ≤ 30% correctly categorises DT species, with three exceptions: two poikilochlorophyllous species and one gymnosperm. The protocol provides a semi‐quantitative expression of DHT that facilitates comparisons of species with different morpho‐physiological traits and/or ecological attributes.     

Effects of temperature and water availability on light energy utilization in photosynthetic processes of Deschampsia antarctica

Regional climate change in Antarctica would favor the carbon assimilation of Antarctic vascular plants, since rising temperatures are approaching their photosynthetic optimum (10–19°C). This could be detrimental for photoprotection mechanisms, mainly those associated with thermal dissipation, making plants more susceptible to eventual drought predicted by climate change models. With the purpose to study the effect of temperature and water availability on light energy utilization and putative adjustments in photoprotective mechanisms of Deschampsia antarctica Desv., plants were collected from two Antarctic provenances: King George Island and Lagotellerie Island. Plants were cultivated at 5, 10 and 16°C under well‐watered (WW) and water‐deficit (WD, at 35% of the field capacity) conditions. Chlorophyll fluorescence, pigment content and de‐epoxidation state were evaluated. Regardless of provenances, D. antarctica showed similar morphological, biochemical and functional responses to growth temperature. Higher temperature triggered an increase in photochemical activity (i.e. electron transport rate and photochemical quenching), and a decrease in thermal dissipation capacity (i.e. lower xanthophyll pool, Chl a/b and β carotene/neoxanthin ratios). Leaf mass per unit area was reduced at higher temperature, and was only affected in plants exposed to WD at 16°C and exhibiting lower electron transport rate and amount of chlorophylls. D. antarctica is adapted to frequent freezing events, which may induce a form of physiological water stress. Photoprotective responses observed under WD contribute to maintain a stable photochemical activity. Thus, it is possible that short‐term temperature increases could favor the photochemical activity of this species. However, long‐term effects will depend on the magnitude of changes and the plant's ability to adjust to new growth temperature.