An integrated practical implementation of continuous aqueous two‐phase systems for the recovery of human IgG: From the microdevice to a multistage bench‐scale mixer‐settler device

Aqueous two‐phase systems (ATPS) are a liquid‐liquid extraction technology with clear process benefits; however, its lack of industrial embracement is still a challenge to overcome. Antibodies are a potential product to be recovered by ATPS in a commercial context. The objective of this work is to present a more integral approach of the different isolated strategies that have arisen in order to enable a practical, generic implementation of ATPS, using human immunoglobulin G (IgG) as experimental model. A microfluidic device is used for ATPS parameters preselection for product recovery. ATPS were continuously operated in a mixer‐settler device in one stage, multistage and multistage with recirculation configuration. Single‐stage pure IgG extraction with a polyethylene glycol (PEG) 3350‐phophates ATPS within continuous operation allowed a 65% recovery. Further implementation of a multistage platform promoted a higher particle partitioning reaching a 90% recovery. The processing of IgG from a cell supernatant culture harvest in a multistage system with top phase recirculation resulted in 78% IgG recovery in bottom phase. This work conjugates three not widely spread methodologies for ATPS: microfluidics, continuous and multistage operation.     

An Overview of Ten Italian Horse Breeds through Mitochondrial DNA

BackgroundThe climatic and cultural diversity of the Italian Peninsula triggered, over time, the development of a great variety of horse breeds, whose origin and history are still unclear. To clarify this issue, analyses on phenotypic traits and genealogical data were recently coupled with molecular screening.MethodologyTo provide a comprehensive overview of the horse genetic variability in Italy, we produced and phylogenetically analyzed 407 mitochondrial DNA (mtDNA) control-region sequences from ten of the most important Italian riding horse and pony breeds: Bardigiano, Esperia, Giara, Lipizzan, Maremmano, Monterufolino, Murgese, Sarcidano, Sardinian Anglo-Arab, and Tolfetano. A collection of 36 Arabian horses was also evaluated to assess the genetic consequences of their common use for the improvement of some local breeds.ConclusionsIn Italian horses, all previously described domestic mtDNA haplogroups were detected as well as a high haplotype diversity. These findings indicate that the ancestral local mares harbored an extensive genetic diversity. Moreover, the limited haplotype sharing (11%) with the Arabian horse reveals that its impact on the autochthonous mitochondrial gene pools during the final establishment of pure breeds was marginal, if any. The only significant signs of genetic structure and differentiation were detected in the geographically most isolated contexts (i.e. Monterufolino and Sardinian breeds). Such a geographic effect was also confirmed in a wider breed setting, where the Italian pool stands in an intermediate position together with most of the other Mediterranean stocks. However, some notable exceptions and peculiar genetic proximities lend genetic support to historical theories about the origin of specific Italian breeds.     

Chemical Profile and Antioxidant Properties of Extracts and Essential Oils from Citrus × limon (L.) Burm. cv. Femminello Comune

Citrus × limon cv. Femminello Comune (Rutaceae) from Rocca Imperiale (Italy), one of the six Protected Geographical Indication (PGI) Italian lemon crops, has been recently received renewed interest. In this work, fresh and dried peels and leaves were extracted by hydrodistillation, supercritical fluid extraction (SFE), and Soxhlet apparatus. Chemical profile was assessed by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS). Except for leaves extracts obtained by Soxhlet apparatus, the monoterpene hydrocarbons fraction dominated. Limonene, γ‐terpinene, and β‐pinene were the main identified compounds. The antioxidant activity was investigated using different in vitro assays namely 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH), ABTS, ferric reducing ability power (FRAP), and β‐carotene bleaching test. In DPPH test, the essential oil obtained by hydrodistillation of fresh peel exhibited the highest activity (IC₅₀ of 1.17 mg/ml). Leaves extracted by SFE showed a good activity in both DPPH and β‐carotene bleaching test with IC₅₀ values of 2.20 and 6.66 mg/ml, respectively. Monoterpene hydrocarbons fraction exhibited a positive Pearson's correlation coefficient with all antioxidant assays. Leaves, often considered waste material, should be considered from a different point because they represent a matrix of indisputable interest.     

Hexagonal Boron Nitride‐Based Electrolyte Composite for Li‐Ion Battery Operation from Room Temperature to 150 °C

Batteries for high temperature applications capable of withstanding over 60 °C are still dominated by primary cells. Conventional rechargeable energy storage technologies which have exceptional performance at ambient temperatures employ volatile electrolytes and soft separators, resulting in catastrophic failure under heat. A composite electrolyte/separator is reported that holds the key to extend the capability of Li‐ion batteries to high temperatures. A stoichiometric mixture of hexagonal boron nitride, piperidinium‐based ionic liquid, and a lithium salt is formulated, with ionic conductivity reaching 3 mS cm^?1, electrochemical stability up to 5 V and extended thermal stability. The composite is used in combination with conventional electrodes and demonstrates to be stable for over 600 cycles at 120 °C, with a total capacity fade of less than 3%. The ease of formulation along with superior thermal and electrochemical stability of this system extends the use of Li‐ion chemistries to applications beyond consumer electronics and electric vehicles.     

A biomechanical analysis on the impact of episiotomy during childbirth

Episiotomy is still a controversy issue among physicians, despite the enormous growth of clinical research. Therefore, the potential of numerical modeling of anatomical structures to simulate biomechanical processes was exploited to realize quantitatively the real effects of the episiotomy and its consequences on the pelvic floor muscle. As such, a numerical model was used composed of pelvic floor muscles, a surface delimiting the anterior region, and a fetus body. A normal vaginal delivery without and with different episiotomies was simulated with the fetus in vertex presentation and occipitoanterior position. According to our numerical results, a mediolateral episiotomy has a protective effect, reducing the stress on the muscles, and the force required to delivery successfully up to 52.2 %. The intervention also has benefits on muscle injury, reducing the damage to a small zone. This study demonstrates the feasibility of using a computational modeling approach to study parturition, namely the capability to isolate and evaluate the mechanical significance of a single feature. It must, however, be taken into account that the numerical model does not assess problems that may occur as blood loss, infections and others, so it is necessary to examine whether the benefits of an intervention outweigh the risks.     

Acoustic sensing and signal processing techniques for monitoring milk fouling cleaning operations

Large resource investments are necessary in order to minimize the limiting problems arising from food industrial intensive productivity. One of the most challenging concerns is the cleaning status uncertainty among heat transfer areas in dairy heat exchangers, since the effectiveness of this process cannot be easily validated. The present study aimed to develop a low‐power ultrasound sensing method for monitoring the removal of milk fouling deposits along cleaning processes inside an experimental plate heat exchanger structure, connected to a milk piping unit. For that purpose, signal processing, namely acoustic feature extraction, over different wave patterns combined with artificial neural network techniques was used. Measurements were taken in pulse‐echo mode with a handmade 4 MHz ultrasound transducer. While fouling deposits having initial average thickness values of 250 μm (34.5 ± 4.5 mg/cm²) were removed, the acoustic transmissivity increased. Results showed that the signal features follow the expected trends in both, clean and fouled cases, within right guess detection accuracies above 80%. Therefore, when calibrated well, this could be a very sensitive and noninvasive technique for material characterization, as well as a suitable validation method for industrial cleaning cycle operation optimization that could significantly reduce the associated costs.