Preliminary palynological investigation of Saudi Arabian Upper Ordovician glacial sediments

An Ordovician stratigraphically admixed palynomorph assemblage that contains palynomorphs eroded from Middle through Upper Ordovician strata characterizes the Hawban Member (restricted) of the Sarah Formation in central Saudi Arabia. This distinctive assemblage, combined with detailed sedimentology, helps identify the presence of Hirnantian Gondwanan glacial sediments on the Arabian Plate. Similar Ordovician admixed assemblages have been recognized from Upper Ordovician glacial sediments elsewhere along the Gondwanan margin. Within Saudi Arabia the composition of reworked assemblages depends upon the stratigraphic succession exposed to glacial erosion. Sylvanidium? hawbanense, which is one of the acritarchs found in glacial sediments, is newly described from Arabian Upper Ordovician strata.     

A 31P-NMR study of the intact liver fluke Fasciola hepatica

³¹P-NMR techniques offer a useful method of studying changes in the metabolism of intact parasitic worms. The liver flukes, Fasciola hepatica, provide good quality ³¹P high resolution NMR spectra for at least 6 h under anaerobic conditions. The levels of ATP remain constant throughout this period. There is no signal for phosphocreatine or phosphoarginine. In contrast to the findings in mammalian tissues, there is a distinct peak for the terminal phosphate of ADP. A number of signals are observed in the phosphodiester region of the spectrum the largest of which is identified as l-α-glycerophosphoryl choline. Serotonin (5-hydroxytryptamine) causes an appreciable increase in the levels of sugar phosphates when the flukes are incubated in the absence of glucose. The addition of glucose also causes a marked increase in the signals for the hexose phosphate.     

Estimation of economic injury level of Aphis craccivora Koch. (Homoptera: Aphididae) infesting faba bean in new reclaimed area

This work was based on field screening procedure to detect the population density of Aphis craccivora for two successive seasons (2004–2005) and (2005–2006) to emphasis the relation between the economic injury level (EIL) and yield loss.

Results obtained showed that the equilibrium position (steady point) during the first and second season was 9.06 and 3.32 individuals/five leaflets, respectively, while the injury level was 3.4 and 1.16 individuals/leaflets. When the bean plant was subjected to three successive insecticidal applications during the early growing, season is sufficient to decrease the yield loss significantly (yield capacity 21.43 Ard./fed.) with comparing to untreated plant (14.98 Ard./fed.), while the plants exposure for one treatment was 17.36 Ard./fed. The EIL was 8.6 individual of aphids/plant depending on the market price of bean and control cost during the season.     

Performance of distance-based DNA barcoding in the molecular identification of Primates

For comparative primatology proper recognition of basal taxa (i.e. species) is indispensable, and in this the choice of a suitable gene with high phylogenetic resolution is crucial. For the goals of species identification in animals, the cytochrome c oxidase subunit 1 (cox1) has been introduced as standard marker. Making use of the difference in intra- and interspecific genetic variation – the DNA barcoding gap – cox1 can be used as a fast and accurate marker for the identification of animal species. For the Order Primates we compare the performance of cox1 (166 sequences; 50 nominal species) in species-identification with that of two other mitochondrial markers, 16S ribosomal RNA (412 sequences, 92 species) and cytochrome b (cob: 547 sequences, 72 species). A wide gap exist between intra- and interspecific divergences for both cox1 and cob genes whereas this gap is less apparent for 16S, indicating that rRNA genes are less suitable for species delimitation in DNA barcoding. For those species where multiple sequences are available there are significant differences in the intraspecific genetic distances between different mitochondrial markers, without, however, showing a consistent pattern. We conclude that cox1 allows accurate differentiation of species and as such DNA barcoding may have an important role to play in comparative primatology.     

Phylogeography of the Common Pheasant Phasianus colchicus

The Common Pheasant Phasianus colchicus is widely distributed in temperate to subtropical regions of the Palaearctic realm. Populations of Common Pheasant have been classified into five subspecies groups based on morphological variations in male plumage. Previous phylogeographical studies have focused on limited sets of subspecies groups in the eastern Palaearctic and knowledge on subspecies in the western Palaearctic region is still poor. In this study, we undertake the first comprehensive analysis of subspecies from all five defined subspecies groups across the entire Palaearctic region. Two mitochondrial (CYTB and CR) and two nuclear (HMG and SPI) loci were used to investigate genetic relationships of these subspecies groups and to infer their dispersal routes. Our results revealed that the subspecies elegans, with its range in northwestern Yunnan, China, was in the basal position among 17 studied subspecies, supporting a previous hypothesis that the Common Pheasant most probably originated in forests in southeastern China. Subspecies in the western Palaearctic region nested within the most subspecies‐rich torquatus group (‘Grey‐rumped Pheasants’), indicating that the torquatus group is not a clade but instead forms a gradation with other subspecies and subspecies groups. Our dating analysis suggested that the initial divergence among populations of Common Pheasant originated around 3.4 Mya with subsequent dispersal into the Western Palaearctic region during the Late Pliocene–Lower Pleistocene approximately 2.5–1.8 Mya. We propose two possible east‐to‐west colonization routes for the Common Pheasant and suggest conservation implications for some regional subspecies. Overall, this study demonstrates the lack of concordance between morphology‐based subspecies delimitation and their genetic relationships. This is likely to be a consequence of initial isolation due to historical vicariance followed by population admixture due to recent range expansion of Common Pheasant in the western Palaearctic region.     

Social life cycle assessment for material selection: a case study of building materials

Purpose

Sustainability of a material-based product mainly depends on the materials used for the product itself or during its lifetime. A material selection decision should not only capture the functional performance required but should also consider the economical, social, and environmental impacts originated during the product life cycle. There is a need to assess social impacts of materials along the full life cycle, not only to be able to address the “social dimension” in sustainable material selection but also for potentially improving the circumstances of affected stakeholders. This paper presents the method and a case study of social life cycle assessment (S-LCA) specialized for comparative studies. Although the authors’ focus is on material selection, the proposed methodology can be used for comparative assessment of products in general.

Methods

The method is based on UNEP/SETAC “guidelines for social life-cycle assessment of products” and includes four main phases: goal and scope definition, life cycle inventory analysis, life cycle impact assessment, and life cycle interpretation. However, some special features are presented to adjust the framework for materials comparison purpose. In life cycle inventory analysis phase, a hot spot assessment is carried out using material flow analysis and stakeholder and experts’ interviews. Based on the results of that, a pairwise comparison method is proposed for life cycle impact assessment applying analytic hierarchy process. A case study was conducted to perform a comparative assessment of the social and socio-economic impacts in life cycle of concrete and steel as building materials in Iran. For hot spot analysis, generic and national level data were gathered, and for impact assessment phase, site-specific data were used.

Result and discussion

The unique feature of the proposed method compared with other works in S-LCA is its specialty to materials and products comparison. This leads to some differences in methodological issues of S-LCA that are explained in the paper in detail. The case study results assert that “steel/iron” in the north of Iran generally has the better social performance than “concrete/cement.” However, steel is associated with many negative social effects in some subcategories, e.g., freedom of association, fair salary, and occupational health in extraction phase. Against, social profile of concrete and cement industry is damaged mainly due to the negative impact of cement production on safe and healthy living condition. The case study presented in this article shows that the evaluation of social impacts is possible, even if the assessment is always affected by subjective value systems.

Conclusions

Application of the UNEP/SETAC guidelines in comparative studies can be encouraged based on the results of this paper. It enables a hotspot assessment of the social and socio-economic impacts in life cycle of alternative materials. This research showed that the development of a specialized S-LCA approach for materials and products comparison is well underway although many challenges still persist. Particularly characterization method in life cycle impact assessment phase is challenging. The findings of this case study pointed out that social impacts are primarily connected to the conduct of companies and less with processes and materials in general. These findings confirm the results of Dreyer et al. (Int J Life Cycle Assess 11(2):88–97, 2006). The proposed approach aims not only to identify the best socially sustainable alternative but also to reveal product/process improvement potentials to facilitate companies to act socially compatible. It will be interesting to apply the UNEP/SETAC approach of S-LCA to other materials and products; materials with a more complex life cycle will be a special challenge. As with any new method, getting experience on data collection and evaluation, building a data base, integrating the method in software tools, and finding ways for effective communication of results are important steps until integrating S-LCA in routine decision support.     

Inter-rater reliability of physiotherapists using the Action Research Arm Test in chronic stroke

Objectives:The purpose of this study is to establish whether physiotherapists’ ratings are consistent, when using the Action Research Arm Test (ARAT) to score a chronic stroke patient.Methods:This was part of a large project establishing the reliability in chronic stroke. This study used a correlational design comparing the association between physiotherapist scores of the same patient, to establish the ARAT’s inter-rater reliability. The COSMIN checklist was followed to enhance the methodology of the study.Results:Twenty physiotherapists (8 female and 12 male) aged between 25 and 53 years were selected. There were no participant dropouts or withdrawals. The sample size was normally distributed. The physiotherapists appeared representative of the UK physiotherapy population, with the exception of gender. The distribution of scores showed a normal distribution with standard deviation of score of 1.9. The Kendall’s W test showed 0.711 of agreement between the raters. The scores achieved statistical significance showing consistency between physiotherapists’ scores with chronic stroke. Limitations of the study were the use of a small single center convenience sample that may reduce the generalizability of the findings.Conclusions:The ARAT is consistent when scored by physiotherapists in a chronic stroke population. The inter-rater reliability range was (0.70 to 0.90) which is categorized as good.