Comparative assessment of ISSR, DAMD and SCoT markers for evaluation of genetic diversity and conservation of landrace chickpea (Cicer arietinum L.) genotypes collected from north-west of Iran

Morphological traits and three molecular markers techniques: start codon targeted (SCoT), inter-simple sequence repeat (ISSR) and directly amplified minisatellite DNA (DAMD) markers were compared for fingerprinting of 40 landraces chickpea genotypes collected from different geographical locations of north-west of Iran. Variance analysis of ten measured morphological traits showed significant differences existed between genotypes. Cluster analysis based on morphological traits, divided genotypes in three distinct clusters. Average polymorphism information content (PIC) for ISSR, DAMD and SCoT markers was 0.216, 0.232 and 0.232, respectively, and this revealed that SCoT markers were more informative, followed by ISSRs marker, than other markers for the assessment of diversity amongst genotypes. Cluster analysis for three different molecular types revealed that genotypes taken for the analysis can be divided in three and four distinct clusters. Accessions from same geographical regions mostly showed more genetic similarities than those from origins far isolated apart. These results suggest that efficiency of SCOT, DAMD and ISSR markers was relatively the same in fingerprinting of genotypes but SCOT and DAMD analysis are more effective in fingerprinting of chickpea genotypes. To our knowledge, this is the first detailed report of a comparison of performance among two targeted DNA region molecular markers (SCoT and DAMD) and the ISSR technique on a set of samples of chickpea. Overall, our results indicate that SCOT, ISSR and DAMD fingerprinting could be used to detect polymorphism for genotypes of chickpea.     

Utilizing a nano‐sorbent for the selective solid‐phase extraction of vanillic acid prior to its determination by photoluminescence spectroscopy

Vanillic acid (VA) is a phenolic acid, and acts as a natural antioxidant in fruits, vegetables and plants. The extraction and determination of trace levels of VA in plants is important, because stimulation of protein synthesis and activation of antioxidant enzymes occur in the presence of phenolic acids at trace levels. In this research, a photoluminescence spectroscopic method was developed for the quantification of VA in plant samples after separation and pre‐concentration. Selective extraction of VA from aqueous solution was performed using a solid‐phase extraction column packed with nickel–aluminum layered double hydroxide as a nano‐sorbent. After elution of extracted analyte from the column using 3 mL of a 3 mol/L NaOH solution, its concentration was determined spectrofluorometrically at λ_em = 357 nm with excitation at λ_ex = 280 nm. The spectrofluorometry method gave a linear response for VA within the range 20.0–900.0 µg/L, with a correlation coefficient of 0.9982. The limit of detection and sorption capacity were 7.6 µg/L and 66.2 mg/g, respectively. The method was validated by comparing the obtained results with gas chromatographic data. This method was used to determine VA in Chenopodium album and Prangos asperula plants. Copyright © 2014 John Wiley & Sons, Ltd.     

Mutation analysis of androgen receptor gene: Multiple uses for a single test

Androgen receptor gene mutations are one of the leading causes of disorders of sex development (DSD) exhibited by sexual ambiguity or sex reversal. In this study, 2 families with patients whom diagnosed clinically as androgen insensitivity syndrome (AIS) were physically and genetically examined. This evaluation carried out by cytogenetic and molecular analysis including karyotype and sequencing of SRY and AR genes. In family 1, two brothers and their mother were hemizygous and heterozygous respectively for c.2522G > A variant, while one of their healthy brother was a completely normal hemizygote. Family 2 assessment demonstrated the c.639G > A (rs6152) mutation in two siblings who were reared as girls. The SRY gene was intact in all of the study's participants.     

Colorimetric Sensor of Cobalt Ions in Aqueous Solution Using Gold Nanoparticles Modified with Glycyrrhizic Acid

Plasmonics - The present work describes simple and green method for the preparation of gold nanoparticles (AuNPs) in aqueous medium under ambient condition and their use in colorimetric detection...     

Salinity‐induced changes to the survival,growth and glycogen distribution in the early fry stages of silver barb,Barbodes gonionotus (Bleeker, 1850)

Five‐week‐old silver barb, Barbodes gonionotus, fry (initial length = 10 mm) were subjected to different salinities of 0, 3, 6 or 9 ppt for 17 days, to then assess their survival and growth. Whole body histological sections were stained with Periodic‐acid Schiff (PAS). Groups of 15 fish were triplicated in each treatment with an ambient temperature (26–28°C). Results showed that growth and condition factor significantly decreased and increased (p < .05), respectively, with the increased salinities after 17 days. While survival was similar (p > .05), between 0 and 6 ppt (at 98% and 87%, respectively), the decrease was significant at 9 ppt (22%). In addition, the fry at 9 ppt had fewer gill mucous cells as well as reduced PAS positive staining intensity within the liver and intestine. This suggests energy was becoming exhausted, leading to mortalities and lower growth. Silver barb early fry were relatively sensitive to elevated salinity, which was likely due to their young age, but short‐term exposure to 3–6 ppt can be used to decrease potential freshwater diseases in the early nursery culture.     

Reaction of some wheat cultivars and breeding lines to Puccinia striiformis f. sp. tritici hot races in Iran

Many physiological races of Puccinia striiformis f. sp. tritici which cause stripe rust in wheat can be determined in different parts of the world. The emergence of new races with different pathogenicity which happens very quickly breaks cultivars resistant and cause disease. Therefore, breeding cultivar for resistance to different pathogenic races should be continued. In this research, pathogenicity of two isolates collected from two regions of Iran were determined by using wheat yellow rust differential lines, which indicated race 70E50A+ and 6E18A+ The responses of 30 wheat genotypes were separately evaluated in the forms of randomized complete block design with three replicates in the seedling stage under greenhouse condition. The components of resistance including latent period and infection type were recorded. Results indicated genotypes were evaluated in terms of both traits and were significant at 1% level. Also, the results from pathogenicity study indicated of effective gene/s included Yr1, Yr2+, Yr3, Yr4, Yr5, Yr10, Yr15, Yr24, Yr26, YrSP, YrND, YrSD and YrSU. From the genotypes studied in the greenhouse condition, 39% of the genotypes showed complete resistance to both races. Probably, resistance genes, Yr32 and YrCV, or the other unknown genes which are types of seedling resistance are either alone or in combination of one another cause strength in resistant genotypes.     

Canola quality affects second (<Emphasis Type="Italic">Brevicoryne brassicae</Emphasis>) and third (<Emphasis Type="Italic">Diaeretiella rapae</Emphasis>) trophic levels

Biological control agents can be used as a complementary control measure that can be combined with resistant host plants to control pests. In this study, the effects of different canola cultivars (Karaj-1, Karaj-2, Karaj-3, Licord, Okapi, Opera, RGS₀₀₃, Sarigol, Talaye and Zarfam) on the performance and life table parameters of the cabbage aphid, Brevicoryne brassicae, and its parasitoid, Diaeretiella rapae, were determined under laboratory conditions. Total fecundity of the cabbage aphid differed with cultivar, with the highest value (59.41 nymphs per female) of this parameter observed on Opera and the lowest (1.67) observed on RGS₀₀₃. The highest and lowest intrinsic rates of increase (r) of the cabbage aphid were observed on Opera (0.331 day^?1) and RGS₀₀₃ (? 0.242 day^?1) cultivars, respectively, suggesting these to be the most susceptible and most resistant cultivars to this pest. However, because the aphid did not settle and feed well on RGS₀₀₃, it was not possible to determine demographic parameters for its parasitoid. Consequently, the Okapi cultivar, which was the most resistant cultivar to the cabbage aphid after RGS₀₀₃, was used in this study to assess the parasitoid wasp. The parasitoid’s intrinsic rate of increase (r) varied from 0.426 day^?1 on the susceptible cultivar (Opera) to 0.341 day^?1 on the resistant canola cultivar Okapi. Aphid performance decreased 93% on the resistant canola cultivar, while parasitoid performance decreased only 20% on the resistant cultivar compared to more susceptible cultivar.     

Phylogenetic status of brown trout Salmo trutta populations in five rivers from the southern Caspian Sea and two inland lake basins,Iran: a morphogenetic approach

Interrelationships, origin and phylogenetic affinities of brown trout Salmo trutta populations from the southern Caspian Sea basin, Orumieh and Namak Lake basins in Iran were analysed from complete mtDNA control region sequences, 12 microsatellite loci and morphological characters. Among 129 specimens from six populations, seven haplotypes were observed. Based on mtDNA haplotype data, the Orumieh and southern Caspian populations did not differ significantly, but the Namak basin–Karaj population presented a unique haplotype closely related to the haplotypes of the other populations (0·1% Kimura two‐parameter, K2P divergence). All Iranian haplotypes clustered as a distinct group within the Danube phylogenetic grouping, with an average K2P distance of 0·41% relative to other Danubian haplotypes. The Karaj haplotype in the Namak basin was related to a haplotype (Da26) formerly identified in the Tigris basin in Turkey, to a Salmo trutta oxianus haplotype from the Aral Sea basin, and to haplotype Da1a with two mutational steps, as well as to other Iranian haplotypes with one to two mutational steps, which may indicate a centre of origin in the Caspian basin. In contrast to results of the mtDNA analysis, more pronounced differentiation was observed among the populations studied in the morphological and microsatellite DNA data, except for the two populations from the Orumieh basin, which were similar, possibly due to anthropogenic causes.     

Sub-Typing of Extended-Spectrum-β-Lactamase-Producing Isolates from a Nosocomial Outbreak: Application of a 10-Loci Generic Escherichia coli Multi-Locus Variable Number Tandem Repeat Analysis

Extended-spectrum β-lactamase producing Escherichia coli (ESBL-E. coli) were isolated from infants hospitalized in a neonatal, post-surgery ward during a four-month-long nosocomial outbreak and six-month follow-up period. A multi-locus variable number tandem repeat analysis (MLVA), using 10 loci (GECM-10), for ‘generic’ (i.e., non-STEC) E. coli was applied for sub-species-level (i.e., sub-typing) delineation and characterization of the bacterial isolates. Ten distinct GECM-10 types were detected among 50 isolates, correlating with the types defined by pulsed-field gel electrophoresis (PFGE), which is recognized to be the ‘gold-standard’ method for clinical epidemiological analyses. Multi-locus sequence typing (MLST), multiplex PCR genotyping of bla_CTX-M, bla_TEM, bla_OXA and bla_SHV genes and antibiotic resistance profiling, as well as a PCR assay specific for detecting isolates of the pandemic O25b-ST131 strain, further characterized the outbreak isolates. Two clusters of isolates with distinct GECM-10 types (G06-04 and G07-02), corresponding to two major PFGE types and the MLST-based sequence types (STs) 131 and 1444, respectively, were confirmed to be responsible for the outbreak. The application of GECM-10 sub-typing provided reliable, rapid and cost-effective epidemiological characterizations of the ESBL-producing isolates from a nosocomial outbreak that correlated with and may be used to replace the laborious PFGE protocol for analyzing generic E. coli.     

A micromechanical procedure for modelling the anisotropic mechanical properties of brain white matter

This paper proposes a micromechanics algorithm utilising the finite element method (FEM) for the analysis of heterogeneous matter. The characterisation procedure takes the material properties of the constituents, axons and extracellular matrix (ECM) as input data. The material properties of both the axons and the matrix are assumed to have linear viscoelastic behaviour with a perfect bonding between them. The results of the modelling have been validated with experimental data with material white input from brainstem by considering the morphology of brainstem in which most axons are oriented in longitudinal direction in the form of a uniaxial fibrous composite material. The method is then employed to examine the undulations of axons within different subregions of white matter and to study the impact due to axon/matrix volume fractions. For such purposes, different unit cells composed of wavy geometries and with various volume factions have been exposed to the six possible loading scenarios. The results will clearly demonstrate the undulation and axon volume fraction impacts. In this respect, undulation affects the material stiffness heavily in the axon longitudinal direction, whereas the axons' volume fraction has a much greater impact on the mechanical properties of the white matter in general. Also the results show that the created stresses and strains in the axons and matrix under loading will be impacted by undulation change. With increase in undulation the matrix suffers higher stresses when subjected to tension, whereas axons suffer higher stresses in shear. The axons always exhibit higher stresses whereas the matrix exhibits higher strains. The evaluated time-dependent local stress and strain concentrations within a repeating unit cell of the material model are indicative of the mechanical behaviour of the white tissue under different loading scenarios.