Synthesis,computational studies and antiproliferative activities of coumarin-tagged 1,3,4-oxadiazole conjugates against MDA-MB-231 and MCF-7 human breast cancer cells

A novel library of coumarin tagged 1,3,4 oxadiazole conjugates was synthesized and evaluated for their antiproliferative activities against MDA-MB-231 and MCF-7 breast cancer cell lines. The evaluation studies revealed that compound 9d was the most potent molecule with an IC₅₀ value of <5?µM against the MCF-7 cell line. Interestingly, compounds 10b and 11a showed a similar trend with lower inhibitory concentration (IC₅₀?=?7.07?µM), in Estrogen Negative (ER?) cells than Estrogen Positive (ER+) cells. Structure–activity relationship (SAR) studies revealed that conjugates bearing benzyl moieties (9b, 9c and 9d) had superior activities compared to their alkyl analogues. The most potent compound 9d showed ～1.4?times more potent activity than tamoxifen against MCF-7 cell line; while the introduction of sulfone unit in compounds 11a, 11b and 11c resulted in significant cytotoxicity against both MCF-7 and MDA-MB-231 cell lines. These results were further supported by docking studies, which revealed that the stronger binding affinity of the synthesized conjugates is due to the presence of sulfone unit attached to the substituted benzyl moiety in their pharmacophores.     

Synthesis,Cytotoxicity and Antimicrobial Evaluation of New Coumarin‐Tagged β‐Lactam Triazole Hybrid

A series of coumarin‐tagged β‐lactam triazole hybrids ( 10a – 10o ) were synthesized and tested for their cytotoxic activity against MDA‐MB‐231 (triple negative breast cancer), MCF‐7 (estrogen receptor positive breast cancer (ER+)) and A549 (human lung carcinoma) cancer cell lines including one normal cell line, HEK‐293 (human embryonic kidney). Two compounds 10b and 10d exhibited substantial cytotoxic effect against MCF‐7 cancer cell lines with IC₅₀ values of 53.55 and 58.62 μm , respectively. More importantly, compounds 10b and 10d were non‐cytotoxic against HEK‐293 cell lines. Structure–activity relationship (SAR) studies suggested that the nitro and chloro group at the C‐3 position of phenyl ring are favorable for anticancer activity, particularly against MCF‐7 cell lines. Furthermore, antimicrobial evaluation of these compounds revealed modest inhibition of examined pathogenic strains with compounds 10c and 10i being the most promising antimicrobial agents against Pseudomonas aeruginosa and Candida albicans, respectively.     

Assessment of Tropism and Effectiveness of New Primate-Derived Hybrid Recombinant AAV Serotypes in the Mouse and Primate Retina

Adeno-associated viral vectors (AAV) have been shown to be safe in the treatment of retinal degenerations in clinical trials. Thus, improving the efficiency of viral gene delivery has become increasingly important to increase the success of clinical trials. In this study, structural domains of different rAAV serotypes isolated from primate brain were combined to create novel hybrid recombinant AAV serotypes, rAAV2/rec2 and rAAV2/rec3. The efficacy of these novel serotypes were assessed in wild type mice and in two models of retinal degeneration (the Abca4^−/− mouse which is a model for Stargardt disease and in the Pde6b^rd1/rd1 mouse) in vivo, in primate tissue ex-vivo, and in the human-derived SH-SY5Y cell line, using an identical AAV2 expression cassette. We show that these novel hybrid serotypes can transduce retinal tissue in mice and primates efficiently, although no more than AAV2/2 and rAAV2/5 serotypes. Transduction efficiency appeared lower in the Abca4^−/− mouse compared to wild type with all vectors tested, suggesting an effect of specific retinal diseases on the efficiency of gene delivery. Shuffling of AAV capsid domains may have clinical applications for patients who develop T-cell immune responses following AAV gene therapy, as specific peptide antigen sequences could be substituted using this technique prior to vector re-treatments.     

Diagnostic Performance of Various Tests and Criteria Employed in Allergic Bronchopulmonary Aspergillosis: A Latent Class Analysis

Aim

The efficiency of various investigations and diagnostic criteria used in diagnosis of allergic bronchopulmonary aspergillosis (ABPA) remain unknown, primarily because of the lack of a gold standard. Latent class analysis (LCA) can provide estimates of sensitivity and specificity in absence of gold standard. Herein, we report the performance of various investigations and criteria employed in diagnosis of ABPA.

Methods

Consecutive subjects with asthma underwent all the following investigations Aspergillus skin test, IgE levels (total and A.fumigatus specific), Aspergillus precipitins, eosinophil count, chest radiograph, and high-resolution computed tomography (HRCT) of the chest. We used LCA to estimate the performance of various diagnostic tests and criteria in identification of ABPA.

Results

There were 372 asthmatics with a mean age of 35.9 years. The prevalence of Aspergillus sensitization was 53.2%. The sensitivity and specificity of various tests were Aspergillus skin test positivity (94.7%, 79.7%); IgE levels>1000 IU/mL (97.1%, 37.7%); A.fumigatus specific IgE levels>0.35 kUA/L (100%, 69.3%); Aspergillus precipitins (42.7%, 97.1%); eosinophil count>1000 cells/µL (29.5%, 93.1%); chest radiographic opacities (36.1%, 92.5%); bronchiectasis (91.9%, 80.9%); and, high-attenuation mucus (39.7%, 100%). The most accurate criteria was the Patterson criteria using six components followed by the Agarwal criteria. However, there was substantial decline in accuracy of the Patterson criteria if components of the criteria were either increased or decreased from six.

Conclusions

A.fumigatus specific IgE levels and high-attenuation mucus were found to be the most sensitive and specific test respectively in diagnosis of ABPA. The Patterson criteria remain the best diagnostic criteria however they have good veridicality only if six criteria are used.     

Anatomic Twist to a Straightforward Ablation

Atrioventricular (AV) junction ablation for treatment of refractory atrial fibrillation is a well defined, standardized procedure and the simplest of commonly performed radiofrequency ablations in the field of cardiac electrophysiology. We report successful AV junction ablation using an inferior approach in a case of inferior vena cava interruption. Inability during the procedure to initially pass the ablation catheter into the right ventricle, combined with low amplitude electrograms, led to suspicion of an anatomic abnormality. This was determined to be a heterotaxy syndrome with inferior vena cava interruption and azygos continuation, draining in turn into the superior vena cava. Advancing Schwartz right 0 (SRO) sheath through the venous abnormality into the right atrium allowed adequate catheter stability to successfully induce complete AV block with radiofrequency energy.     

Rheological properties of binary and ternary protein-polysaccharide co-hydrogels and comparative release kinetics of salbutamol sulphate from their matrices

Rheological properties of binary (AgarGelA and AgarGelB) and ternary (AgarGelAB and GelABAgar) co-hydrogels of agar (polysaccharide) with gelatin A and gelatin B (proteins) were studied to investigate their differential viscoelastic behavior. Two sets of rheological experiments, isochronal temperature and isothermal frequency sweep, were performed and the storage modulii, G' was measured which could be correlated to the gel strengths. Two separate peaks at 70°C and 35°C, corresponding to melting temperatures of agar and gelatin gels respectively, were obtained when derivative of G' with respect to temperature, dG'/dT was plotted against temperature which clearly showed the presence of two separate networks of gelatin and agar interconnected to each other. The results revealed that AgarGelAB was the strongest and AgarGelA was the weakest gel among all the gels studied. In order to see the effect of gel microstructure on drug encapsulation and release behavior, a model drug salbutamol was encapsulated in various gel matrices and the release of the same was seen in phosphate buffer pH 7.4, in simulated gastric fluid pH 1.2 (SGF) and in simulated intestinal fluid pH 6.8 (SIF) media. The drug release behavior universally followed sigmoidal kinetics invariant of gel composition. It is concluded that the hydrogel microstructure influenced the release behavior and best release, in all the three media, could be found with binary gel, AgarGelB, and ternary gel, AgarGelAB. Finally, microstructure of these gels is proposed.     

Milk somatic cell derived transcriptome analysis identifies regulatory genes and pathways during lactation in Indian Sahiwal cattle (Bos indicus)

Molecular Biology Reports - The present study is an effort to understand the genomic drivers of lactation in Sahiwal (Bos indicus), the best milch cattle breed of the tropics. RNA sequencing of...     

Designing a crop rotation strategy to manage Streptomyces scabies causing potato scab in north India

Common scab of potato caused by various species in the genus Streptomyces has assumed serious proportions in certain potato-growing regions of North India. Although it does not have significant effect on tuber yield, it downgrades quality and reduces marketability. Being soil-borne, this disease is often difficult to manage. Therefore, the present studies were conducted to evaluate different potato-based crop rotations prevalent in north India as a part of a strategy to manage Streptomyces scabies population in scab sick fields. Our results showed that S. scabies population in soil can be effectively reduced either by keeping the field fallow after potato or by including mungbean or sunhemp as green manure, in a single year cropping sequence over a period of four years. Three crop rotations, viz. fallow–rice–potato, mungbean–rice–potato and sunhemp–rice–potato, showed maximum decrease in the population of S. scabies in soil resulting in reduced scab severity. The mungbean- and sunhemp-based crop rotations also enhanced rhizospheric soil microflora especially fluorescent pseudomonads and Trichoderma spp.     

Synthesis of a Nano-Silver Metal Ink for Use in Thick Conductive Film Fabrication Applied on a Semiconductor Package

The success of printing technology in the electronics industry primarily depends on the availability of metal printing ink. Various types of commercially available metal ink are widely used in different industries such as the solar cell, radio frequency identification (RFID) and light emitting diode (LED) industries, with limited usage in semiconductor packaging. The use of printed ink in semiconductor IC packaging is limited by several factors such as poor electrical performance and mechanical strength. Poor adhesion of the printed metal track to the epoxy molding compound is another critical factor that has caused a decline in interest in the application of printing technology to the semiconductor industry. In this study, two different groups of adhesion promoters, based on metal and polymer groups, were used to promote adhesion between the printed ink and the epoxy molding substrate. The experimental data show that silver ink with a metal oxide adhesion promoter adheres better than silver ink with a polymer adhesion promoter. This result can be explained by the hydroxyl bonding between the metal oxide promoter and the silane grouping agent on the epoxy substrate, which contributes a greater adhesion strength compared to the polymer adhesion promoter. Hypotheses of the physical and chemical functions of both adhesion promoters are described in detail.