The involvement of tetA and tetE tetracycline resistance genes in plasmid and chromosomal resistance of Aeromonas in Brazilian strains

This study analyzed the involvement of tetA and tetE genes in the tetracycline resistance of 16 strains of genus Aeromonas, isolated from clinical and food sources. Polymerase chain reactions revealed that 37.5% of the samples were positive for tetA, and also 37.5% were tetE positive. One isolate was positive for both genes. Only the isolate A. caviae 5.2 had its resistance associated to the presence of a plasmid, pSS2. The molecular characterization of pSS2 involved the construction of its restriction map and the determination of its size. The digestion of pSS2 with HindIII originated two fragments (A and B) that were cloned separately into the pUC18 vector. The tetA gene was shown to be located on the HindIII-A fragment by PCR. After transforming a tetracycline-sensitive strain with pSS2, the transformants expressed the resistance phenotype and harbored a plasmid whose size was identical to that of pSS2. The results confirmed the association between pSS2 and the tetracycline resistance phenotype, and suggest a feasible dissemination of tetA and tetE among strains of Aeromonas. This study suggests the spreading tetA and tetE genes in Aeromonas in Brazil and describes a resistance plasmid that probably contributes to the dissemination of the resistance.     

Streptococcus agalactiae GAPDH is a virulence-associated immunomodulatory protein

Certain extracellular proteins produced by several pathogenic microorganisms interfere with the host immune system facilitating microbial colonization and were thus designated virulence-associated immunomodulatory proteins. In this study, a protein with B lymphocyte stimulatory activity was isolated from culture supernatants of Streptococcus agalactiae strain NEM316. This protein, with an apparent molecular mass of 45 kDa, was identified as GAPDH by N-terminal amino acid sequencing. The gapC gene was cloned and expressed in Escherichia coli for the production of a recombinant histidyl-tagged protein. The recombinant GAPDH (rGAPDH), purified in an enzymatically active form, induced in vitro an up-regulation of CD69 expression on B cells from normal and BCR transgenic mice. In addition, rGAPDH induced an increase in the numbers of total, but not of rGAPDH-specific, splenic Ig-secreting cells in C57BL/6 mice treated i.p. with this protein. These in vitro- and in vivo-elicited B cell responses suggest that the B cell stimulatory effect of rGAPDH is independent of BCR specificity. A S. agalactiae strain overexpressing GAPDH showed increased virulence as compared with the wild-type strain in C57BL/6 mice. This virulence was markedly reduced in IL-10-deficient and anti-rGAPDH antiserum-treated mice. These results suggest that IL-10 production, which was detected at higher concentrations in the serum of rGAPDH-treated mice, is important in determining the successfulness of the host colonization by S. agalactiae and they highlight the direct role of GAPDH in this process. Taken together, our data demonstrate that S. agalactiae GAPDH is a virulence-associated immunomodulatory protein.     

Production of stable bispecific IgG1 by controlled Fab-arm exchange

The manufacturing of bispecific antibodies can be challenging for a variety of reasons. For example, protein expression problems, stability issues, or the use of non-standard approaches for manufacturing can result in poor yield or poor facility fit. In this paper, we demonstrate the use of standard antibody platforms for large-scale manufacturing of bispecific IgG1 by controlled Fab-arm exchange. Two parental antibodies that each contain a single matched point mutation in the CH3 region were separately expressed in Chinese hamster ovary cells and manufactured at 1000 L scale using a platform fed-batch and purification process that was designed for standard antibody production. The bispecific antibody was generated by mixing the two parental molecules under controlled reducing conditions, resulting in efficient Fab-arm exchange of >95% at kg scale. The reductant was removed via diafiltration, resulting in spontaneous reoxidation of interchain disulfide bonds. Aside from the bispecific nature of the molecule, extensive characterization demonstrated that the IgG1 structural integrity was maintained, including function and stability. These results demonstrate the suitability of this bispecific IgG1 format for commercial-scale manufacturing using standard antibody manufacturing techniques.     

LC-MS/MS quantitation of plasma progesterone in cattle

Quantitation of progesterone (P₄) in biological fluids is often performed by radioimmunoassay (RIA), whereas liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) has been used much less often. Due to its autoconfirmatory nature, LC-MS/MS greatly minimizes false positives and interference. Herein we report and compare with RIA an optimized LC-MS/MS method for rapid, efficient, and cost-effective quantitation of P₄ in plasma of cattle with no sample derivatization. The quantitation of plasma P₄ released from three nonbiodegradable, commercial, intravaginal P₄-releasing devices (IPRD) over 192 h in six ovariectomized cows was compared in a pairwise study as a test case. Both techniques showed similar P₄ kinetics (P > 0.05) whereas results of P₄ quantitation by RIA were consistently higher compared with LC-MS/MS (P < 0.05) due to interference and matrix effects. The LC-MS/MS method was validated according to the recommended analytical standards and displayed P₄ limits of detection (LOD) and quantitation (LOQ) of 0.08 and a 0.25 ng/mL, respectively. The high selective LC-MS/MS method proposed herein for P₄ quantitation eliminates the risks associated with radioactive handling; it also requires no sample derivatization, which is a common requirement for LC-MS/MS quantitation of steroid hormones. Its application to multisteroid assays is also viable, and it is envisaged that it may provide a gold standard technique for hormone quantitation in animal reproductive science studies.     

Exchange of Cu and Cd across the sediment-water interface in intertidal mud flats from Ria Formosa (Portugal)

Depth profiles of Fe, Mn, (HS)_t, Cu and Cd concentrations in pore water were determined on a seasonal scale in intertidal sediments of Ria Formosa. Concentrations of Cu and Cd were also determined in near-bottom water during the short period that water inundates the sediment. A maximum near the sediment-water interface was observed in depth profiles of Mn and Fe concentrations followed by a decrease with depth. Otherwise, depth profiles of (HS⁻)_t were irregular but peak concentrations was observed below Mn and Fe maximum. Although subsurface maximum was observed at deeper layers for Cu and Cd, the profiles shape varied among sites and sampling dates. This suggests site specificity and alterations associated with early diagenetic reactions. In order to assess exchanges of Cu and Cd across the sediment water interface, diffusive fluxes and advective transport were estimated. Both contribute substantially to the daily transfer of Cd from intertidal sediments to the water column of Ria Formosa. In the case of Cu, the flux associated with tidal flooding (advective flux) was the major contributor. Presumably, the exchange of trace elements between the sediment-water interface in intertidal areas of macro- and meso-tidal systems are underestimated since do not take into consideration the pulse contribution associated with tidal flooding.     

Self-assembled dextrin nanogel as protein carrier: controlled release and biological activity of IL-10

Interleukin-10 (IL-10) is an anti-inflammatory cytokine, which active form is a non-covalent homodimer. Given the potential of IL-10 for application in various medical conditions, it is essential to develop systems for its effective delivery. In previous work, it has been shown that a dextrin nanogel effectively incorporated and stabilized rIL-10, enabling its release over time. In this work, the delivery system based on dextrin nanogels was further analyzed. The biocompatibility of the nanogel was comprehensively analyzed, through cytotoxicity (lactate dehydrogenase (LDH) release, MTS, Live, and Dead) and genotoxicity (comet) assays. The release profile of rIL-10 and its biological activity were evaluated in vivo, using C57BL/6 mice. Although able to maintain a stable concentration of IL-10 for at least 4 h in mice serum, the amount of protein released was rather low. Despite this, the amount of rIL-10 released from the complex was biologically active inhibiting TNF-α production, in vivo, by LPS-challenged mice. In spite of the significant stabilization achieved using the nanogel, rIL-10 still denatures rather quickly. An additional effort is thus necessary to develop an effective delivery system for this cytokine, able to release active protein over longer periods of time. Nevertheless, the good biocompatibility, the protein stabilization effect and the ability to perform as a carrier with controlled release suggest that self-assembled dextrin nanogels may be useful protein delivery systems.     

Comparison of two Ovsynch protocols (GnRH versus LH) for fixed timed insemination in buffalo (Bubalus bubalis)

We evaluated the efficiency of replacing GnRH with LH in the ovulation synchronization protocol in buffaloes. Buffaloes received GnRH on Day 0, (Buserelin; Conceptal, 20 microg), PGF2alpha (Luprostiol; Prosolvin, 15 mg) on Day 7 and GnRH (Buserelin; Conceptal, 10 microg; Group 1) or porcine LH (LH; Lutropin-V, 12.5 mg; Group 2) on Day 9. In Experiment 1, we studied the follicular dynamics of 30 buffaloes (Group 1, n = 15 and Group 2, n = 15). We performed ultrasonography every 12 h from Days 0 to 2, then on Day 7 and then every 6 h from the time of GnRH or LH treatment (Day 9) until the time of ovulation. All females not ovulating by 48 h after the second GnRH or LH injection were considered as nonresponders. In Experiment 2, we evaluated 305 buffaloes (Group 1, n = 154; Group 2, n = 151), using the same two treatments studied in Experiment 1. We also recorded and evaluated aspects like parity, lactational status, the presence of mucus, and uterine tone at the time of artificial insemination (Al). In Experiment 1, ovulation rate after the first GnRH was 86.6% (26/30). Ovulation rates were 93.3% (14/15; Group 1) after the second dose of GnRH and 93.3% (14/15) after LH (Group 2). Ovulation occurred 36.4+/-10.4 h after the first GnRH. The interval for treatment to ovulation was 26.5+/-9.6 h for buffaloes treated with GnRH (Group 1) and 24.4+/-7.9 h for buffaloes treated with LH (Group 2); the time of ovulation did not differ statistically between the two groups (GnRH versus LH; P > 0.05). In Experiment 2, conception rates of the animals AI in the field were 56.5% (Group 1) and 64.2% (Group 2), respectively (P = 0.08). The response to the treatment with LH was not different to the treatment with GnRH; however, multiparous buffaloes had higher conception rates than the primiparous buffaloes in both groups (P > 0.05). Buffaloes with mucus at the time of AI in Group 2 had higher conception rates than the buffaloes that had mucus in Group 1 (P < 0.05). Uterine tone and lactational status did not influence conception rates (P > 0.05). In summary, the results showed that both treatments resulted in synchronization of ovulation and acceptable conception rates. Therefore, the exogenous injection of LH can substitute the GnRH injections in the Ovsynch program in buffaloes.