Opposite effects on facial morphology due to gene dosage sensitivity

Sequencing technology is increasingly demonstrating the impact of genomic copy number variation (CNV) on phenotypes. Opposing variation in growth, head size, cognition and behaviour is known to result from deletions and reciprocal duplications of some genomic regions. We propose normative inversion of face shape, opposing difference from a matched norm, as a basis for investigating the effects of gene dosage on craniofacial development. We use dense surface modelling techniques to match any face (or part of a face) to a facial norm of unaffected individuals of matched age, sex and ethnicity and then we reverse the individual’s face shape differences from the matched norm to produce the normative inversion. We demonstrate for five genomic regions, 4p16.3, 7q11.23, 11p15, 16p13.3 and 17p11.2, that such inversion for individuals with a duplication or (epi)-mutation produces facial forms remarkably similar to those associated with a deletion or opposite (epi-)mutation of the same region, and vice versa. The ability to visualise and quantify face shape effects of gene dosage is of major benefit for determining whether a CNV is the cause of the phenotype of an individual and for predicting reciprocal consequences. It enables face shape to be used as a relatively simple and inexpensive functional analysis of the gene(s) involved.     

The ‘Orsten’—More than a Cambrian Konservat-Lagerstätte yielding exceptional preservation

In several areas of southern Sweden, limestone nodules, locally called Orsten occur within bituminous alum shales. These shales and nodules were deposited under dysoxic conditions at the bottom of what was most likely a shallow sea during the late Middle to Upper Cambrian (ca. 500 million years ago). Subsequently, the name ‘Orsten’ has been referred to particular, mainly arthropod, fossils from such nodules, and, in a wider sense, to the specific type of preservation of minute fossil through secondarily phosphatization. This preservation is exceptional in yielding uncompacted and diagenetically undeformed three-dimensional fossils. ‘Orsten’-type preservation resulted from incrustation of a thin external layer and also by impregnation by calcium phosphate and, therefore, mineralization of the surface of the former animals during early diagenesis. Primarily, this type of preservation seems to have affected only cuticle-bearing metazoans such as cycloneuralian nemathelminths and arthropods. ‘Orsten’ preservation in this sense seems to be limited by size, in having yielded no partial or complete animals larger than 2 mm. On the other end of the scale, even larvae 100 μm long are preserved, often more complete than larger specimens, and details such as setules and pores smaller than 1 μm can be observed. Fossils preserved in such a manner are almost exclusively hollow carcasses, but can be filled secondarily; less common are completely phosphatized compact specimens. The high quality of preservation makes the Swedish ‘Orsten’ a typical Konservat-Lagerstätte. Yet, its special type of preservation is more widespread in time and geographical distribution than assumed initially, and the origin of the phosphate is not necessarily restricted just to one source. Subsequent to the first discoveries of limb fragments of Cambrian arthropods in 1975, animals in this special preservational type have been discovered in several continents and across a broad stratigraphic range including even Proterozoic strata. The latter have yielded early cleavage and metazoan embryonic stages, expanding knowledge on the preservational capacities of the ‘Orsten’. Here, we report the recent status of our research on the ‘Orsten’ and give perspectives for future exploration on a worldwide scale, particularly in light of a recently formed international research group named Center of Orsten Research and Exploration (C.O.R.E.).     

Phylogeny and evolution of Burmanniaceae (Dioscoreales) based on nuclear and mitochondrial data

The mycoheterotrophic Burmanniaceae are one of the three families currently recognized in the order Dioscoreales. Phylogenetic inference using nucleotide sequences of the nuclear 18S rDNA region and the mitochondrial nad1 b-c intron revealed two well-supported, major lineages within the family, corresponding to the two tribes recognized in the family: Burmannieae and Thismieae. All data supported a strong relationship between Thismieae and Tacca (Dioscoreaceae) making both Burmanniaceae and Dioscoreaceae polyphyletic. The three largest Burmanniaceae genera, Burmannia, Gymnosiphon, and Thismia, are paraphyletic. The splitting of Burmanniaceae into Burmannieae and Thismieae indicates two independent origins of mycoheterotrophy and correlated loss of chlorophyll in Dioscoreales. In the genus Burmannia, in which many species still contain chlorophyll, the achlorophyllous species are nested in between the autotrophic species, suggesting many independent changes from autotrophy to heterotrophy or vice versa. A Bayesian relative rates test on the 18S rDNA data showed considerable variation in substitution rates among Burmanniaceae. The substitution rates in all Thismieae and many Burmannieae are significantly faster than in Dioscoreaceae, but there seems to be no correlation between rate increases and the loss of photosynthesis.     

NO removal in continuous BioDeNOx reactors: Fe(II)EDTA2- regeneration, biomass growth, and EDTA degradation

BioDeNOx is a novel technique for NOx removal from industrial flue gases. In principle, BioDeNOx is based on NO absorption into an aqueous Fe(II)EDTA2- solution combined with biological regeneration of that scrubber liquor in a bioreactor. The technical and economical feasibility of the BioDeNOx concept is strongly determined by high rate biological regeneration of the aqueous Fe(II)EDTA2- scrubber liquor and by EDTA degradation. This investigation deals with the Fe(II)EDTA2- regeneration capacity and EDTA degradation in a lab-scale BioDeNOx reactor (10-20 mM Fe(II)EDTA2-, pH 7.2 +/- 0.2, 55 degrees C), treating an artificial flue gas (1.5 m3/h) containing 60-155 ppm NO and 3.5-3.9% O2. The results obtained show a contradiction between the optimal redox state of the aqueous FeEDTA solution for NO absorption and the biological regeneration. A low redox potential (below -150 mV vs. Ag/AgCl) is needed to obtain a maximal NO removal efficiency from the gas phase via Fe(II)EDTA2- absorption. Fe(III)EDTA- reduction was found to be too slow to keep all FeEDTA in the reduced state. Stimulation of Fe(III)EDTA- reduction via periodical sulfide additions (2 mM spikes twice a week for the conditions applied in this study) was found to be necessary to regenerate the Fe(II)EDTA2- scrubber liquor and to achieve stable operation at redox potentials below -150 mV (pH 7.2 +/- 0.2). However, redox potentials of below -200 mV should be avoided since sulfide accumulation is unwanted because it is toxic for NO reduction. Very low values for biomass growth rate and yield, respectively, 0.043/d and 0.009 mg protein per mg ethanol, were observed. This might be due to substrate limitations, that is the electron acceptors NO and presumably polysulfide, or to physiological stress conditions induced by the EDTA rich medium or by radicals formed in the scrubber upon the oxidation of Fe(II)EDTA2- by oxygen present in the flue gas. Radicals possibly also induce EDTA degradation, which occurs at a substantial rate: 2.1 (+/-0.1) mM/d under the conditions investigated.     

A finite element model of the lower limb during stance phase of gait cycle including the muscle forces

Background

Results of finite element (FE) analyses can give insight into musculoskeletal diseases if physiological boundary conditions, which include the muscle forces during specific activities of daily life, are considered in the FE modelling. So far, many simplifications of the boundary conditions are currently made. This study presents an approach for FE modelling of the lower limb for which muscle forces were included.

Methods

The stance phase of normal gait was simulated. Muscle forces were calculated using a musculoskeletal rigid body (RB) model of the human body, and were subsequently applied to a FE model of the lower limb. It was shown that the inertial forces are negligible during the stance phase of normal gait. The contact surfaces between the parts within the knee were modelled as bonded. Weak springs were attached to the distal tibia for numerical reasons.

Results

Hip joint reaction forces from the RB model and those from the FE model were similar in magnitude with relative differences less than 16%. The forces of the weak spring were negligible compared to the applied muscle forces. The maximal strain was 0.23% in the proximal region of the femoral diaphysis and 1.7% in the contact zone between the tibia and the fibula.

Conclusions

The presented approach based on FE modelling by including muscle forces from inverse dynamic analysis of musculoskeletal RB model can be used to perform analyses of the lower limb with very realistic boundary conditions. In the present form, this model can be used to better understand the loading, stresses and strains of bones in the knee area and hence to analyse osteotomy fixation devices.

     

Apoptosis of Central and Peripheral Neurons Can Be Prevented with Cyclin-Dependent Kinase/Mitogen-Activated Protein Kinase Inhibitors

Abstract: Previous studies have indicated that certain members of the cyclin-dependent kinase/mitogen-activated protein kinase superfamily are involved in apoptosis of neuronal cells. Here, we have examined programmed cell death induced by withdrawal of neurotrophic support from CNS (rat retinal) and PNS (chick sympathetic, sensory, and ciliary) neurons. All four neuron types were equally rescued by the purine analogues olomoucine and roscovitine. Olomoucine inhibits multiple cyclin-dependent and mitogen-activated protein kinases with similar potency. Roscovitine is a more selective cyclin-dependent kinase inhibitor; but, so is butyrolactone I, which did not prevent retinal ganglion cell death. The specific p38^MAPK inhibitor SB-203580 did not prevent apoptosis in retinal ganglion cells. Death of these cells in the absence of neurotrophic factors was accompanied by morphological changes indicative of apoptosis, including nuclear condensation and fragmentation. Treatment with olomoucine or roscovitine not only prevented these apoptotic changes in retinal ganglion cells but also blocked neurite outgrowth. The survival-promoting activity of olomoucine correlated with its in vitro IC₅₀ for c-Jun N-terminal kinase-1 and its potency to repress c- jun induction in live PC12 cells. Roscovitine was more potent in rescuing neurons than in inhibiting Jun kinase. Thus, the antiapoptotic action of roscovitine might be due to inhibition of additional kinases.     

Restriction enzyme maps of the chimeric R/Ent plasmid pCG86 and the related Ent plasmid P307

Complete restriction enzyme cleavage site maps for three enzymes and incomplete maps for four enzymes have been constructed for the chimeric R/Ent plasmid pCG86 of Escherichia coli and the related Ent plasmid P307.