Synthesis, characterization and X-ray structure of [Pd(SO4)(dppp)] · H2O, a catalyst for the CO-ethene copolymerization [dppp = 1,3-bis(diphenylphosphino)propane]

The title complex has been synthesized by first reacting dppp with Pd(AcO)₂ in acetone and then with NaHSO₄ in water. It has been characterized by IR, NMR and X-ray diffraction studies. The ³¹P NMR spectrum in DMSO shows a singlet at 16.62 ppm indicating that the two P atoms are equivalent and that the sulfate anion is weakly coordinating. The X-ray structure shows that the Pd atom is surrounded in an almost regular square planar environment by the two P atoms and by two O atoms of the sulfate anion and that the neutral complex is accompanied by a water molecule of crystallization. The Pd-P distances (2.217(1) and 2.233(1)) and the P-Pd-P angle (90.78(3)°) are close to those found in other complexes where the chelating diphosphine is the same. Also the Pd-O distances and the O-Pd-O bond angle are comparable to those of other relevant chelating ligands.In MeOH, the title complex, in combination with H₂SO₄, catalyses the CO-ethene copolymerization. The productivity reaches a maximum upon increasing the H₂SO₄/Pd ratio up to ca. 470 (7650 g of polyketone/g Pd h at 90 °C and 45 atm, CO/ethene 1/1). The viscosity of the polyketone passes through a maximum of 0.95 dL/g in m-cresol when the above ratio is ca. 100. It has been proposed that acid promotes the copolymerization process by destabilizing the β- and γ-chelates intermediates involved in chain growing process, thus favoring the insertion of the monomers. At relatively high acid concentration the lowering of productivity and viscosity suggests that the sulfate anion competes with the monomers for the coordination to the metal center.In H₂O-CH₃COOH as a solvent the productivity strongly depends on the H₂O/CH₃COOH ratio, as it passes through a maximum of 12 000 g polymer/g Pd h in the presence of ca. 60% of H₂O. The productivity is significantly lower than that found when the acetate and chloride analogues are used (27 000 g polyketone/g Pd · h). Thus, it is likely that the sulfate anion assists significantly the copolymerization process even though the concentration of CH₃COOH/CH₃COO⁻ is much preponderant.     

Detection of Treponema denticola in root canal systems in primary and secondary endodontic infections. A correlation with clinical symptoms

AIM: The aim of the study was to investigate the presence of Treponema denticola in primary and secondary root-infected canal systems with periapical pathology and correlations with clinical signs and symptoms. METHODOLOGY: Endodontic samples were obtained from canals of 102 teeth: 79 had primary endodontic disease and 23 secondary endodontic disease. For each tooth, clinical data including symptoms and X-ray appearance were examined. The presence of T. denticola biological samples from the root canal space was detected by a PCR assay. RESULTS: T. denticola was detected in 24 out of the 79 teeth with primary infection and in 8 out of the 23 teeth with secondary infection. Teeth with specific clinical symptoms were frequently associated with T. denticola presence inside the root canal system. CONCLUSIONS: The presence of T. denticola in root canal system in association with specific clinical signs and symptoms of endodontic disease strongly suggests that this spirochete might play a critical role in the pathogenesis of the acute infection and rapid bone tissue alterations in both primary and secondary endodontic infections.     

Ion cyclotron resonance as a tool in regenerative medicine

The identification of suitable stem cell cultures and differentiating conditions that are free of xenogenic growth supplements is an important step in finding the clinical applicability of cell therapy in two important fields of human medicine: heart failure and bone remodeling, growth and repair. We recently demonstrated the possibility of obtaining cardiac stem cells (CSCs) from human endomyocardial biopsy specimens. CSCs self-assemble into multi-cellular clusters known as cardiospheres (CSps) that engraft and partially regenerate infarcted myocardium. CSps and cardiosphere-derived-cells (CDCs) were exposed for five days in an incubator regulated for temperature, humidity, and CO(2) inside a solenoid system. This system was placed in a magnetically shielded room. The cells were exposed simultaneously to a static magnetic field (MF) and a parallel low-alternating frequency MF, close to the cyclotron frequency corresponding to the charge/mass ratio of the Ca(++) ion. In this exposure condition, CSps and CDCs modulate their differentiation turning on cardiogenesis and turning off vasculogenesis. Cardiac markers such as troponin I (TnI) and myosin heavy chain (MHC) were up-regulated. Conversely, angiogenic markers such as vascular endothelial growth factor (VEGF) and kinase domain receptor (KDR) were down-regulated as evidenced by immunocytochemistry. Exposure to the 7 Hz calcium ion cyclotron resonance (ICR) frequency can modulate the cardiogenic vs. angiogenic differentiation process of ex vivo expanded CSCs. This may pave the way for novel approaches in tissue engineering and cell therapy. With regard to bone remodeling, it has been suggested that bone marrow-derived mesenchymal stem cells (MSC) may be considered as a potential therapeutic tool. Using the Ca(++)-dependent specific differentiation potential of the ELF-MF 7 Hz ICR, we show here that exposure of human MSC to these same MF conditions enhanced the expression of osteoblast differentiation markers such as alkaline phosphatase, osteocalcin, and osteopontin, as analyzed by real-time quantitative PCR, without affecting cell proliferation. As expected, while the differentiation marker factors were up regulated, the ICR electromagnetic field down regulated osteoprotegerin gene expression, a critical regulator of postnatal skeletal development and homeostasis in humans as well as mice.     

Synthesis of 3,6-diazabicyclo[3.1.1]heptanes as novel ligands for neuronal nicotinic acetylcholine receptors

Alpha series of novel 3,6-diazabicyclo[3.1.1]heptane derivatives 4a-f was synthesized and their affinity and selectivity towards alpha4beta2 and alpha7 nAChR subtypes were evaluated. The results of the current study revealed a number of compounds (4a, 4b and 4c) having a very high affinity for alpha4beta2 (K(i) at alpha4beta2 ranging from 0.023 to 0.056 nM) versus alpha7 nAChR subtypes; among these compounds, the 3-(6-bromopyridin-3-yl)-3,6-diazabicyclo[3.1.1]heptane 4c was found to be the most alpha7alpha4beta2 selective term in receptor binding assays (alpha7alpha4beta2=1295). Moreover, compound 4d also had high affinity for the alpha4beta2 nAChR subtype (K(i)=1.2 nM) with considerably high selectivity (alpha7/alpha4beta2=23300).     

Enantiospecific synthesis and insect feeding activity of sulfur-containing cyclitols

The first syntheses of two deoxythiocyanocyclitols (4-deoxy-4-thiocyano-l-chiro-inositol and deoxythiocyanoconduritol F) and two deoxysulfonylcyclitol acetals are reported by a chemoenzymatic enantioselective route. The compounds were prepared by a sequence of enzymatic and ruthenium-catalyzed dihydroxylations, and the results were studied regarding reaction conditions and co-catalyst for different derivatives. The new compounds were included in a minilibrary of deoxygenated cyclitols and evaluated for their capacity to influence the feeding behavior of Epilachna paenulata (Coleoptera: Coccinellidae), a common pest of the Curcubitaceae crops.     

Simplified amplified-fragment length polymorphism method for genotyping Mycobacterium tuberculosis isolates

A simplified amplified-fragment length polymorphism (AFLP) method was developed and applied to genotype 52 Mycobacterium tuberculosis isolates. This method can be carried out using only one restriction enzyme (XhoI), one double strand adapter, and one PCR primer. The amounts of DNA and DNA polymerase, and the concentrations of primer and Mg²⁺ in the PCR step were optimized using the Basic Sequential Simplex method. AFLP analysis of the isolates generated a total of 24 differently sized bands ranging from 1537 to 121 bp, and 52 different band patterns, with a minimum of 2 and a maximum of 13 bands. The results were compared with the well-established IS6110 restriction fragment length polymorphism (IS6110-RFLP) typing method, which rendered a total of 32 differently sized bands from 1 to 12 kbp, and 52 different band patterns, with a minimum of 3 and a maximum of 15 bands. Therefore, both genotyping methods showed a discriminatory power of samples of 100%. Nevertheless, pairwise comparisons of the 1326 similarity indexes calculated for both typing methods showed a total absence of correlation between the similarity indexes of the two methods. The simplified AFLP method is expected to be more useful for genotyping M. tuberculosis isolates compared to the IS6110-RFLP method, since the former evaluates genetic variations throughout the M. tuberculosis genome. Furthermore, the relatively rapid and low-cost simplified AFLP method compares favorably to the IS6110-RFLP or conventional AFLP methods, and shows great promise for genotyping M. tuberculosis isolates, especially in developing countries or for preliminary screening.