Dynamic adhesion and separation of cells in vitro. II. Interactions of cells with hydrophilic and hydrophobic surfaces

Experiments made on the passage of cells through untreated and siliconized glass beads, and on the adhesion and spread of cultured cells on glass and Teflon surfaces show that, in the absence of serum and in its presence in low concentrations, cell adhesion and spread is sensitive to substratum wettability. On the other hand, in the presence of 100% serum, no differences in adhesive parameters are detectable. It is concluded that arguments correlating cell adhesion to surface wettability, and, by inference, surface free energy, are unsubstantiated in 100% serum, which may well approximate to the in vivo situation. The results also show no correlation between parameters of cell adhesion and cell separation, and thereby support the hypothesis that these are different processes.     

Some Properties of Heat-Resistant and Heat-Sensitive Strains of Clostridium perfringens I. Heat Resistance and Toxigenicity

Heat resistance at 100 C (D-values), sporulating ratios, toxigenicity for mice, and lecithinase activity (as micrograms per milliliter of enzyme, ascertained by the lecithovitellin reaction) were determined for four strains of Clostridium perfringens. A definite inverse relationship between thermal resistance and toxigenicity was found. The D-values ranged from 17.6 for the most heat-resistant strain to 0.3 for the strain possessing the least heat resistance, with corresponding lecithinase activities from 25 to 133 mug/ml of enzyme. The sporulating ratios did not differ greatly between the strains. The heat stability of the toxin was greater at 100 C than at 75 C. There was a noticeable difference between the heat stabilities of the toxin in the culture fluids of the heat-sensitive and heat-resistant strains at pH 7.0 when the toxic filtrates were held at 100 C. At a holding temperature of 75 C, a similar but lesser difference was observed at pH 5.5. Heat resistance and lecithinase activity did not change when a substrain of the least heat-resistant parent strain was obtained through heat selection by a single transfer, or when the most heat-resistant strain was transferred serially 12 times.     

On the proposed energy switch in photosynthesis

This paper analyzes the “energy switch” that has often been proposed to direct quanta absorbed by a given photosynthetic unit alternately to the site of one and then the other primary reaction. Such a device is essential to the Franck-Rosenberg theory, but not to the Duysens-Witt-Kok (DWK) model, which needs to assume only that the reactions occur in series. If there is no energy switch, an incident quantum absorbed at any time by any particular pigment molecule stands a chance of ending up in the reactive site of either primary reaction. The “separate packages” model is a special case of this general picture. Without an energy switch, a series model requires a storage device to insure that a quantum will not be wasted if it arrives at the site of one reaction while the photosynthetic unit is set up to perform the other. Such a storage device can be appended to the DWK model. Alternatively, this model can be augmented by an energy switch. This gives what is commonly known as the “spillover model,” a confusing name which we suggest be abandoned. As a clear-cut-though perhaps technically unfeasible-test of the energy switch hypothesis, we imagine a quantum injector, a hypothetical source of flashing light which delivers a single quantum to every photosynthetic unit with each flash. We aim this useful figment at an (equally hypothetical) photosynthetic system all of whose units are set up to perform the same primary reaction. If there is an energy switch, we can now prepare a “synchronous” photosynthetic apparatus in which each photosynthetic unit is undergoing the same reaction at the same time.     

Adenosine Triphosphate and Other Requirements for the Utilization of Glucose by Agents of the Psittacosis-Trachoma Group.

Weiss, Emilio (Naval Medical Research Institute, Bethesda, Md.). Adenosine triphosphate and other requirements for the utilization of glucose by agents of the psittacosis-trachoma group. J. Bacteriol. 90:243-253. 1965.-The agent of meningopneumonitis cultivated in the allantoic cavity of chick embryos and purified by differential centrifugations was employed for most of the studies of the requirements for glucose utilization. The evolution of C(14)O(2) from glucose-1-C(14) was used as the criterion of metabolic activity in most experiments. The rate of glucose utilization increased somewhat during the first hour of incubation at 34.4 C and became approximately constant during the second hour. Changes in glucose concentration from 1 to 5 mm did not appreciably affect metabolic activity. More vigorous CO(2) production was obtained when the ratio of K(+)-Na(+) was >1 and, under certain conditions, when the concentration of inorganic phosphate was relatively high (0.05 m). Glucose utilization was entirely dependent on added adenosine triphosphate (ATP) and Mg(++). The effect of ATP was greatly reduced when the microorganisms were partially disrupted with sonic energy. Adenosine diphosphate (ADP) could be substituted for ATP, but the activity was reduced to less than 20%. ATP was not required when glucose-6-phosphate was substituted for glucose. With ADP and glucose, glucose-6-phosphate was an effective competitor of glucose utilization. Nicotinamide adenine dinucleotide phosphate (NADP) enhanced CO(2) production from carbon 1, but not from other carbons, with glucose and, especially, glucose-6-phosphate as substrates. ATP and NADP produced the above-described effects only when their concentrations were comparable to those of the substrates. These concentrations always exceeded the amount of CO(2) produced (0.05 to 0.5 mumole/mg of agent protein). The concentration of NADP could be reduced when oxidized glutathione was added. Diphosphothiamine had no effect on CO(2) production. Qualitatively similar results were obtained with the agent of trachoma purified from yolk sac. These experiments furnish evidence that agents of the psittacosistrachoma group, despite their enzymatic capabilities, require an exogenous source of energy.     

Inhibitory action of selenite on Escherichia coli, Proteus vulgaris, and Salmonella thompson

Weiss, K. F. (Iowa State University, Ames), J. C. Ayres, and A. A. Kraft. Inhibitory action of selenite on Escherichia coli, Proteus vulgaris, and Salmonella thompson. J. Bacteriol. 90:857-862. 1965.-The resistance of three microorganisms, Escherichia coli (ISU-41), Proteus vulgaris (ISU-37c), and Salmonella thompson (ISU-86-2), to increasing concentrations of selenite was determined. E. coli was completely inhibited by 1.25% sodium hydrogen selenite, and 0.25% sodium hydrogen selenite caused a pronounced lag. P. vulgaris survived selenite concentrations of over 3%. S. thompson was inhibited completely by 3% selenite but not by 2.5%, although there was a considerable lag and a decrease in total growth. The relationship of growth, uptake, and reduction of selenite was determined. The susceptible E. coli incorporated up to twice as much selenium as did the other two organisms during the early stages of incubation. Radioautographs of seleno analogues of sulfur-containing amino acids revealed the presence of seleno-cystine in all three organisms, and seleno-methionine in E. coli. Compounds having R(F) values corresponding to possible oxidation products of seleno-methionine were present in the hydrolysates of P. vulgaris and S. thompson. Kinetic aspects of selenite uptake, rather than the ultimate localization of selenite in the cell protein, appear to be the factors that determine the degree of resistance or of susceptibility to selenite.     

A physical map including a new class I gene (cda12) of the human major histocompatibility complex (A2/B13 haplotype) derived from a monosomy 6 mutant cell line

To avoid interpretative problems due to restriction fragment length polymorphisms, the monosomy 6 mutant cell line BM19.7 was employed to establish a molecular map of the human major histocompatibility (HLA) complex in the A2,B13,Bw4,DRw6,DRw52,DQw1,DPw2 haplotype. Results were obtained mainly by field-inversion gel electrophoresis and Southern blotting techniques. The map extends to 4800 kb and includes the HLA complex with a length of 4200 kb. Five HTF islands could be positioned on the map. The class I region has a size of about 2000 kb and includes nonclassical HLA class I genes, some of which must be localized within 200 kb telomeric of HLA-A. A new class I gene, cda12, distinct from HLA-A, HLA-B, or HLA-C, has been localized within 50 kb from HLA-A. The class I region contains a gap of about 500 kb, just telomeric of HLA-C, in which further class I genes could not be detected. The class II region has a size of 1000 kb, which is separated from the class I region by about 1200 kb. The 5' end of the HLA-B gene is situated centromeric, giving an orientation opposite to that of the TNFA and TNFB loci. The estimated length of the HLA complex correlates well with its size determined cytogenetically using mutant cell lines with interstitial deletions.     

Biological and molecular variability of human immunodeficiency virus type 2 isolates from The Gambia.

Seven new human immunodeficiency virus type 2 (HIV-2) isolates (CBL-20 to CBL-26) from The Gambia were characterized. Their cytopathogenicity and growth in vitro correlated with the severity of clinical disease. CBL-22 was highly sensitive to neutralization by HIV-2 sera and was cross-neutralized by some HIV-1 sera. These findings, the differing sizes of envelope glycoproteins of individual isolates, and the sequence analysis of amplified regions of the viral DNAs show that these HIV-2 isolates from one geographical region in West Africa exhibit biological and genome variability comparable to that observed for HIV-1.     

A general method for the induction and screening of antisera for cDNA-encoded polypeptides: antibodies specific for a coronavirus putative polymerase-encoding gene

A prokaryotic vector, pGE374, containing the recA and lacZ genes, out-of-frame, was used for the expression of cDNA derived from the putative polymerase-encoding gene of the coronavirus mouse hepatitis virus strain A59 (MHV-A59). The pGE374/viral recombinant vector generates a tripartite bacterial/viral protein composed of a segment of the RecA protein at the N terminus, the coronaviral sequences in the middle, and an enzymatically active beta-galactosidase at the C terminus. Rabbits immunized with such recombinant proteins generated antibodies to the MHV-A59 portion of the tripartite protein. Because the MHV-A59 polymerase proteins have been difficult to identify during infection, we used a novel method to demonstrate the viral specificity of the antiserum. The viral cDNA was excised from the expression vector, and transferred to a pGem vector, downstream from and in-frame with a portion of the cat gene. This construct contained a bacteriophage RNA polymerase promoter that enabled the cell-free synthesis of a fusion protein that was used to verify that antibodies were generated to the expressed viral DNA. This strategy was shown to successfully result in the specific generation of antibodies to the encoded information of the viral cDNA. Furthermore, this method has general applicability in the generation and characterization of antibodies directed against proteins encoded in cDNAs.