Development of genome-wide insertion and deletion markers for maize,based on next-generation sequencing data

Background

Insertions and deletions (indels) are the most abundant form of structural variation in all genomes. Indels have been increasingly recognized as an important source of molecular markers due to high-density occurrence, cost-effectiveness, and ease of genotyping. Coupled with developments in bioinformatics, next-generation sequencing (NGS) platforms enable the discovery of millions of indel polymorphisms by comparing the whole genome sequences of individuals within a species.

Results

A total of 1,973,746 unique indels were identified in 345 maize genomes, with an overall density of 958.79 indels/Mbp, and an average allele number of 2.76, ranging from 2 to 107. There were 264,214 indels with polymorphism information content (PIC) values greater than or equal to 0.5, accounting for 13.39 % of overall indels. Of these highly polymorphic indels, we designed primer pairs for 83,481 and 29,403 indels with major allele differences (i.e. the size difference between the most and second most frequent alleles) greater than or equal to 3 and 8 bp, respectively, based on the differing resolution capabilities of gel electrophoresis. The accuracy of our indel markers was experimentally validated, and among 100 indel markers, average accuracy was approximately 90 %. In addition, we also validated the polymorphism of the indel markers. Of 100 highly polymorphic indel markers, all had polymorphisms with average PIC values of 0.54.

Conclusions

The maize genome is rich in indel polymorphisms. Intriguingly, the level of polymorphism in genic regions of the maize genome was higher than that in intergenic regions. The polymorphic indel markers developed from this study may enhance the efficiency of genetic research and marker-assisted breeding in maize.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1797-5) contains supplementary material, which is available to authorized users.     

Differential mitochondrial calcium responses in different cell types detected with a mitochondrial calcium fluorescent indicator, mito-GCaMP2

Mitochondrial calcium plays a crucial role in mitochondrial metabolism, cell calcium handling, and cell death. However, some mechanisms concerning mitochondrial calcium regulation are still unknown, especially how mitochondrial calcium couples with cytosolic calcium. In this work, we constructed a novel mitochondrial calcium fluorescent indicator (mito-GCaMP2) by genetic manipulation. Mito-GCaMP2 was imported into mitochondria with high efficiency and the fluorescent signals co-localized with that of tetramethyl rhodamine methyl ester, a mitochondrial membrane potential indicator. The mitochondrial inhibitors specifically decreased the signals of mito-GCaMP2. The apparent K(d) of mito-GCaMP2 was 195.0 nmol/L at pH 8.0 in adult rat cardiomyocytes. Furthermore, we observed that mito-GCaMP2 preferred the alkaline pH surrounding of mitochondria. In HeLa cells, we found that mitochondrial calcium ([Ca(2+)](mito)) responded to the changes of cytosolic calcium ([Ca(2+)](cyto)) induced by histamine or thapasigargin. Moreover, external Ca(2+) (100 μmol/L) directly induced an increase of [Ca(2+)](mito) in permeabilized HeLa cells. However, in rat cardiomyocytes [Ca(2+)](mito) did not respond to cytosolic calcium transients stimulated by electric pacing or caffeine. In permeabilized cardiomyocytes, 600 nmol/L free Ca(2+) repeatedly increased the fluorescent signals of mito-GCaMP2, which excluded the possibility that mito-GCaMP2 lost its function in cardiomyocytes mitochondria. These results showed that the response of mitochondrial calcium is diverse in different cell lineages and suggested that mitochondria in cardiomyocytes may have a special defense mechanism to control calcium flux.     

Arabidopsis Villins Promote Actin Turnover at Pollen Tube Tips and Facilitate the Construction of Actin Collars

Apical actin filaments are crucial for pollen tube tip growth. However, the specific dynamic changes and regulatory mechanisms associated with actin filaments in the apical region remain largely unknown. Here, we have investigated the quantitative dynamic parameters that underlie actin filament growth and disappearance in the apical regions of pollen tubes and identified villin as the major player that drives rapid turnover of actin filaments in this region. Downregulation of Arabidopsis thaliana VILLIN2 (VLN2) and VLN5 led to accumulation of actin filaments at the pollen tube apex. Careful analysis of single filament dynamics showed that the severing frequency significantly decreased, and the lifetime significantly increased in vln2 vln5 pollen tubes. These results indicate that villin-mediated severing is critical for turnover and departure of actin filaments originating in the apical region. Consequently, the construction of actin collars was affected in vln2 vln5 pollen tubes. In addition to the decrease in severing frequency, actin filaments also became wavy and buckled in the apical cytoplasm of vln2 vln5 pollen tubes. These results suggest that villin confers rigidity upon actin filaments. Furthermore, an observed decrease in skewness of actin filaments in the subapical region of vln2 vln5 pollen tubes suggests that villin-mediated bundling activity may also play a role in the construction of actin collars. Thus, our data suggest that villins promote actin turnover at pollen tube tips and facilitate the construction of actin collars.     

Removal of persistent organic pollutants from micro-polluted drinking water by triolein embedded absorbent

A new biomimetic absorbent, cellulose acetate (CA) embedded with triolein (CA-triolein), was prepared and applied for the removal of persistent organic pollutants (POPs) from micro-polluted aqueous solution. The comparison of CA-triolein, CA and granular activated carbon (GAC) for dieldrin removal was investigated. Results showed that CA-triolein absorbent gave a lowest residual concentration after 24 h although GAC had high removal rate in the first 4 h adsorption. Then the removal efficiency of mixed POPs (e.g. aldrin, dieldrin, endrin and heptachlor epoxide), absorption isotherm, absorbent regeneration and initial column experiments of CA-triolein were studied in detail. The linear absorption isotherm and the independent absorption in binary isotherm indicated that the selected POPs are mainly absorbed onto CA-triolein absorbent by a partition mechanism. The absorption constant, K, was closely related to the hydrophobic property of the compound. Thermodynamic calculations showed that the absorption was spontaneous, with a high affinity and the absorption was an endothermic reaction. Rinsing with hexane the CA-triolein absorbent can be regenerated after absorption of POPs. No significant decrease in the dieldrin removal efficiency was observed even when the absorption–regeneration process was repeated for five times. The results of initial column experiments showed that the CA-triolein absorbent did not reach the breakthrough point at a breakthrough empty-bed volume (BV) of 3200 when the influent concentration was 1–1.5 μg/L and the empty-bed contact time (EBCT) was 20 min.     

Mitochondrial recycling of ascorbic acid as a mechanism for regenerating cellular ascorbate

Mitochondria are the major source of potentially damaging reactive oxygen species in most cells. Since ascorbic acid, or vitamin C, can protect against cellular oxidant stress, we studied the ability of mitochondria prepared from guinea pig skeletal muscle to recycle the vitamin from its oxidized forms. Although ascorbate concentrations in freshly prepared mitochondria were only about 0.2 mM, when provided with 6 mM succinate and 1 mM dehydroascorbate (the two-electron-oxidized form of the vitamin), mitochondria were able to generate and maintain concentrations as high as 4 mM, while releasing most of the ascorbate into the incubation medium. Mitochondrial reduction of dehydroascorbate was strongly inhibited by 1,3-bis(chloroethyl)-1-nitrosourea and by phenylarsine oxide. Despite existing evidence that mitochondrial ascorbate protects the organelle from oxidant damage, ascorbate failed to preserve mitochondrial alpha-tocopherol during prolonged incubation in oxygenated buffer. Nonetheless, the capacity for mitochondria to recycle ascorbate from its oxidized forms, measured as ascorbate-dependent ferricyanide reduction, was several-fold greater than total steady-state ascorbate concentrations. This, and the finding that more than half of the ascorbate recycled from dehydroascorbate escaped the mitochondrion, suggests that mitochondrial recycling of ascorbate might be an important mechanism for regenerating intracellular ascorbate.     

Studies on the interaction mechanism between hexakis(imidazole) manganese(II) terephthalate and DNA and preparation of DNA electrochemical sensor

The interaction between hexakis(imidazole) manganese(II) terephthalate ([Mn(Im)(6)](teph).4H(2)O) and salmon sperm DNA in 0.2M pH 2.30 Britton-Robinson buffer solution was studied by fluorescence spectroscopy and cyclic voltammetry. Increasing fluorescence was observed for [Mn(Im)(6)](2+) with DNA addition, while quenching fluorescence phenomenon appeared for EB-DNA system when [Mn(Im)(6)](2+) was added. There were a couple quasi-reversible redox peaks of [Mn(Im)(6)](2+) from the cyclic voltammogram on the glassy carbon electrode. The peak current of [Mn(Im)(6)](2+) decreased with positive shift of the formal potential in the presence of DNA compared with that in the absence of DNA. All the experimental results indicate that [Mn(Im)(6)](2+) can bind to DNA mainly by intercalative binding mode. The binding ratio of the DNA-[Mn(Im)(6)](2+) association complex is calculated to be 1:1 and the binding constant is 4.44x10(3) M(-1). By using [Mn(Im)(6)](teph).4H(2)O as the electrochemical hybridization indicator, the DNA electrochemical sensor was prepared by covalent interaction and the selectivity of ssDNA modified electrode were described. The results demonstrate the use of electrochemical DNA biosensor in the determination of complementary ssDNA.     

Strategy for allosteric analysis based on protein-patterned stationary phase in microfluidic chip

An effective method is presented for the on-chip analysis of chiral interactions with a successful depression of nonspecific adsorption. The alumina gel-derived protein network on poly(methyl methacrylate) (PMMA) microchannel was explored to form a protein-stationary phase and then used to carry out electrophoresis for fast enantioseparation coupled with electrochemical detection. On the basis of the chemical modification of a synthesized copolymer containing silane-functionalized scaffold, alumina sol-gel could react readily with the silane groups and form steady microstructure on the chip surface achieving the encapsulation of functional biomolecules. Compared with the native PMMA microchannels, the modified surfaces exhibited much better wettability, more stable and enhanced electroosmotic mobility, and less nonspecific adsorption. The water contact angle and EOF of alumina-gel-derived PMMA substrate were 22 degrees and 4.3 x 10(-4) cm(2) V(-1) s(-1), compared to those of 73 degrees and 1.9 x 10(-4) cm(2) V(-1) s(-1) from the untreated one, respectively. Bovine serum albumin, acting as a target protein, could be stably and homogeneously immobilized in the modified PMMA microchannel to fabricate a protein-stationary phase. Under a mild condition, D- and L-tryptophan were efficiently separated with a resolution of 1.57. The as-prepared microchip can perform chiral separations within short time, indicating that the general protocol has the potential to provide a platform for high throughput screening of enantiomer candidates such as those biochemical drugs with protein targets and the research of receptor interactions.