Effect of passive myocardium on the compliance of porcine coronary arteries

The objective of this study was to determine the effect of passive myocardium on the coronary arteries under distension and compression. To simulate distension and compression, we placed a diastolic-arrested heart in a Lucite box, where both the intravascular pressure and external (box) pressure were varied independently and expressed as a pressure difference (DeltaP = intravascular pressure - box pressure). The DeltaP-cross-sectional area relationship of the first several generations of porcine coronary arteries and the DeltaP-volume relationship of the coronary arterial tree (vessels >0.5 mm in diameter) were determined using a video densitometric technique in the range of +150 to -150 mmHg. The vasodilated left anterior descending (LAD) coronary artery of six KCl-arrested hearts were perfused with iodine and 3% Cab-O-Sil. The intravascular pressure was varied in a triangular pattern, whereas the absolute cross-sectional area of each vessel and the total arterial volume were calculated using video densitometry under different box pressures (0, 50, 100, and 150 mmHg). In the range of positive DeltaP, we found that the compliance of the proximal LAD artery in situ (4.85 +/- 3.8 x 10-3 mm2/mmHg) is smaller than that of the same artery in vitro (16.5 +/- 6 x 10-3 mm2/mmHg; P = 0.009). Hence, the myocardium restricts the compliance of the epicardial artery under distension. In the negative DeltaP range, the LAD artery does not collapse, whereas the same vessel readily collapses when tested in vitro. Hence, we conclude that myocardial tethering prevents collapse of large blood vessel under compression.     

The structure and specificity of Escherichia coli maltose acetyltransferase give new insight into the LacA family of acyltransferases

The crystallographic three-dimensional structure of the Escherichia coli maa gene product, previously identified as a maltose O-acetyltransferase (MAT) [Brand, B., and Boos, W. (1991) J. Biol. Chem. 266, 14113-14118] has been determined to 2.15 A resolution by the single anomalous dispersion method using data from a crystal cocrystallized with trimethyllead acetate. It is shown here that MAT acetylates glucose exclusively at the C6 position and maltose at the C6 position of the nonreducing end glucosyl moiety. Furthermore, MAT shows higher affinity toward artificial substrates containing an alkyl or hydrophobic chain as well as a glucosyl unit. The presence of a long hydrophobic patch near the acceptor site provides the structural explanation for this preference. The three-dimensional structure reveals the expected trimeric left-handed parallel beta-helix structure found in all other known hexapeptide repeat enzymes. In particular, the structure shows similarities both overall and at the putative active site to the recently determined structure of galactoside acetyltransferase (GAT), the lacA gene product [Wang, X.-G., Olsen, L. R., and Roderick, S. L. (2002) Structure 10, 581-588]. The structure, together with the new biochemical data, suggests that GAT and MAT are more closely related than previously thought and might have similar cellular functions. However, while GAT is specific for acetylation of galactosyl units, MAT is specific for glucosyl units and is able to acetylate maltooligosaccharides, an important property for biotechnological applications. Structural differences at the acceptor site reflect the differences in substrate specificity.     

Serp-1, a viral anti-inflammatory serpin,regulates cellular serine proteinase and serpin responses to vascular injury

Complex DNA viruses have tapped into cellular serpin responses that act as key regulatory steps in coagulation and inflammatory cascades. Serp-1 is one such viral serpin that effectively protects virus-infected tissues from host inflammatory responses. When given as purified protein, Serp-1 markedly inhibits vascular monocyte invasion and plaque growth in animal models. We have investigated mechanisms of viral serpin inhibition of vascular inflammatory responses. In vascular injury models, Serp-1 altered early cellular plasminogen activator (tissue plasminogen activator), inhibitor (PAI-1), and receptor (urokinase-type plasminogen activator) expression (p < 0.01). Serp-1, but not a reactive center loop mutant, up-regulated PAI-1 serpin expression in human endothelial cells. Treatment of endothelial cells with antibody to urokinase-type plasminogen activator and vitronectin blocked Serp-1-induced changes. Significantly, Serp-1 blocked intimal hyperplasia (p < 0.0001) after aortic allograft transplant (p < 0.0001) in PAI-1-deficient mice. Serp-1 also blocked plaque growth after aortic isograft transplant and after wire-induced injury (p < 0.05) in PAI-1-deficient mice indicating that increase in PAI-1 expression is not required for Serp-1 to block vasculopathy development. Serp-1 did not inhibit plaque growth in uPAR-deficient mice after aortic allograft transplant. We conclude that the poxviral serpin, Serp-1, attenuates vascular inflammatory responses to injury through a pathway mediated by native uPA receptors and vitronectin.     

A new dipeptide,O-phosphoserylethanolamine isolated from Agkistroden blomhoffi (mamushi)

A new dipeptide was isolated from several tissues of Agkistroden blomhoffi (mamushi: a venomous snake in Japan), using ion-exchange resins and thin-layer chromatography. It was identified as O-phosphoserylethanolamine by mass spectrometry and comparison with synthetic compounds using several methods. This compound was contained in several mamushi tissues including the liver, heart, brain, bile, and muscle. The concentrations of O-phosphoserylethanolamine in the liver, brain, muscle, skin, heart, and bile were 7.17+/-3.11,16.98+/-4.25,37.37+/-7.88,37.56+/-8.97,23.93+/-6.11, and 22.21+/-5.76 micromol/g, respectively.     

Non-tuberculous mycobacteria I: one year clinical isolates identification in Tertiary Hospital Aids Reference Center,Rio de Janeiro,Brazil, in pre highly active antiretroviral therapy era

The aim of this study was to determine the prevalence of non-tuberculous mycobacteria (NTM) isolates at University Hospital, Reference Center for Aids in Rio de Janeiro, Brazil, during one year. We used standard biochemical tests for species identification and IS1245 PCR amplification was applied as a Mycobacterium avium specific identification marker. Four hundred and four specimens from 233 patients yielded acid-fast bacilli growth. M. tuberculosis was identified in 85% of the patients and NTM in 15%. NTM disseminated infection was a common event correlated with human immunodeficiency virus (HIV) infected patients and only in HIV negative patients the source of NTM was non sterile site. M. avium complex (MAC) was biochemically identified in 57.8% (49/83) of NTM isolates, most of them from sterile sites (75.5%), and in 94% (46/49) the IS 1245 marker specific for M. avium was present. Twenty NTM strains showed a MAC biochemical pattern with the exception of a urease-positive (99% of MAC are urease-negative), however IS1245 was detected in 96% of the strains leading to their identification as M. avium. In this group differences in NTM source was not significant. The second most frequently isolated NTM was identified as M. scrofulaceum (7.2%), followed by M. terrae (3.6%), M. gordonae (2.4%), M. chelonae (1.2%), M. fortuitum (1.2%) and one strain which could not be identified. All were IS1245 negative except for one strain identified as M. scrofulaceum. It is interesting to note that non-sterile sites were the major source of these isolates (92.8%). Our finding indicated that M. avium is still the major atypical species among in the MAC isolates recovered from Brazilian Aids patients without highty active antiretroviral therapy schema. Some discrepancies were seen between the identification methods and further investigations must be done to better characterize NTM isolates using other phenotypic and genotypic methods.     

AGenDA: homology-based gene prediction

We present a www server for homology-based gene prediction. The user enters a pair of evolutionary related genomic sequences, for example from human and mouse. Our software system uses CHAOS and DIALIGN to calculate an alignment of the input sequences and then searches for conserved splicing signals and start/stop codons around regions of local sequence similarity. This way, candidate exons are identified that are used, in turn, to calculate optimal gene models. The server returns the constructed gene model by email, together with a graphical representation of the underlying genomic alignment.     

Stimuli-Responsive magnetic nanoparticles for monoclonal antibody purification

Monoclonal antibodies (mAbs) are important therapeutic proteins. One of the challenges facing large-scale production of monoclonal antibodies is the capacity bottleneck in downstream processing, which can be circumvented by using magnetic stimuli-responsive polymer nanoparticles. In this work, stimuli-responsive magnetic particles composed of a magnetic poly(methyl methacrylate) core with a poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AA)) shell cross-linked with N, N'-methylenebisacrylamide were prepared by miniemulsion polymerization. The particles were shown to have an average hydrodynamic diameter of 317 nm at 18°C, which decreased to 277 nm at 41°C due to the collapse of the thermo-responsive shell. The particles were superparamagnetic in behavior and exhibited a saturation magnetization of 12.6 emu/g. Subsequently, we evaluated the potential of these negatively charged stimuli-responsive magnetic particles in the purification of a monoclonal antibody from a diafiltered CHO cell culture supernatant by cation exchange. The adsorption of antibodies onto P(NIPAM-co-AA)-coated nanoparticles was highly selective and allowed for the recovery of approximately 94% of the mAb. Different elution strategies were employed providing highly pure mAb fractions with host cell protein (HCP) removal greater than 98%. By exploring the stimuli-responsive properties of the particles, shorter magnetic separation times were possible without significant differences in product yield and purity.     

Angiostatin effects on endothelial cells mediated by ceramide and RhoA

Angiostatin is a cleavage product of plasminogen that has anti-angiogenic properties. We investigated whether the effects of angiostatin on endothelial cells are mediated by ceramide, a lipid implicated in endothelial cell signaling. Our results demonstrate that angiostatin produces a transient increase in ceramide that correlates with actin stress fiber reorganization, detachment and death. DNA array expression analysis performed on ceramide-treated human endothelial cells demonstrated induction of certain genes involved in cytoskeleton organization. Specifically, we report that treatment with angiostatin or ceramide results in the activation of RhoA, an important effector of cytoskeletal structure. We also show that treatment of endothelial cells with the antioxidant N-acetylcysteine abrogates morphological changes and cytotoxic effects of treatment with angiostatin or ceramide. These findings support a model in which angiostatin induces a transient rise in ceramide, RhoA activation and free radical production.     

Efficient embryogenesis and regeneration in freshly isolated and cultured wheat (Triticum aestivum L.) microspores without stress pretreatment

The major advantage of doubled haploids in plant breeding is the immediate achievement of complete homozygosity. Desired genotypes are thus fixed in one generation, reducing time and cost for cultivar or inbred development. Among the different technologies to produce doubled haploids, microspore embryogenesis is by far the most common. It usually requires reprogramming of microspores by stress such as cold, heat, and starvation, followed by embryo development under stress-free conditions. We report here the development of a simple and efficient isolated microspore culture system for producing doubled haploid wheat plants in a wide spectrum of genotypes, in which embryogenic microspores and embryos are formed without any apparent stress treatment. Microspores were isolated from fresh spikes in a nutrient-free medium by stirring and cultured in medium A2 in the dark at 25°C. Once embryogenic microspores were formed, ovaries and phytohormones were added directly to the cultures without changing the medium. The cultures were incubated in the dark at 25–27°C until the formation of embryos and then the embryos were transferred to regeneration medium. The regeneration frequency and percentage of green plants increased significantly using this protocol compared to the shed microspore culture method.Communicated by W. Harwood