The effect of high temperature and high atmospheric CO2 on carbohydrate changes in bell pepper (Capsicum annuum) pollen in relation to its germination

Pollen viability and germination are known to be sensitive to high temperature (HT). However, the mode by which high temperature impairs pollen functioning is not yet clear. In the present study, we investigated the effect of high temperature on changes occurring in carbohydrate of bell pepper (Capsicum annuum L. cv. Mazurka) pollen in order to find possible relations between these changes and pollen germination under heat stress. When pepper plants were maintained under a moderate HT regime (32/26 degrees C, day/night) for 8 days before flowers have reached anthesis, pollen count at anthesis was similar to that found in plants grown under normal temperatures (NT 28/22 degrees C). However, the in vitro germination, carried out at 25 degrees C, of pollen from HT plants was greatly reduced. This effect matched the marked reduction in the number of seeds per fruit in the HT plants. Maintaining the plants at high air CO2 concentration (800 &mgr;mol mol-1 air) in both temperature treatments did not affect the in vitro germination of pollen from NT plants, but restored germination to near the normal level in pollen from HT plants. Under NT conditions, starch, which was negligible in pollen at meiosis (8 days before anthesis, A-8) started to accumulate at A-4 and continued to accumulate until A-2. From that stage until anthesis, starch was rapidly degraded. On the other hand, sucrose concentration rose from stage A-4 until anthesis. Acid invertase (EC 3.2.1.26) activity rose parallel with the increase of sucrose. In pollen from HT plants, sucrose and starch concentrations were significantly higher at A-1 pollen than in that of NT plants. Under high CO2 conditions, the sucrose concentration in the pollen of HT plants was reduced to levels similar to those in NT pollen. In accordance with the higher sucrose concentration in HT pollen, the acid invertase activity in these pollen grains was lower than in NT pollen. The results suggest that the higher concentrations of sucrose and starch in the pollen grains of HT plants may result from reduction in their metabolism under heat stress. Elevated CO2 concentration, presumably by increasing assimilate availability to the pollen grain, may alleviate the inhibition of sucrose and starch metabolism, thereby increasing their utilization for pollen germination under the HT stress. Acid invertase may have a regulatory role in this system.     

Long-wavelength iodide-sensitive fluorescent indicators for measurement of functional CFTR expression in cells

Limitations of available indicators [such as6-methoxy-N-(3-sulfopropyl)quinolinium(SPQ)] for measurement of intracellular Cl are their relatively dimfluorescence and need for ultraviolet excitation. A series oflong-wavelength polar fluorophores was screened to identify compoundswith Cl and/orI sensitivity, brightfluorescence, low toxicity, uniform loading of cytoplasm with minimalleakage, and chemical stability in cells. The best compound found was7-(-D-ribofuranosylamino)-pyrido[2,1-h]-pteridin-11-ium-5-olate (LZQ). LZQ is brightly fluorescent with excitation andemission maxima at 400-470 and 490-560 nm, molar extinction11,100 M¹ · cm¹(424 nm), and quantum yield 0.53. LZQ fluorescence is quenched byI by a collisionalmechanism (Stern-Volmer constant 60 M¹) and is not affectedby other halides, nitrate, cations, or pH changes (pH 5-8). AfterLZQ loading into cytoplasm by hypotonic shock or overnight incubation,LZQ remained trapped in cells (leakage <3%/h). LZQ stained cytoplasmuniformly, remained chemically inert, did not bind to cytoplasmiccomponents, and was photobleached by <1% during 1 h of continuousillumination. Cytoplasmic LZQ fluorescence was quenched selectively byI (50% quenching at 38 mMI). LZQ was used tomeasure forskolin-stimulatedI/ClandI/NO₃exchange in cystic fibrosis transmembrane conductance regulator(CFTR)-expressing cell lines by fluorescence microscopy and microplatereader instrumentation using 96-well plates. The substantially improvedoptical and cellular properties of LZQ over existing indicators shouldpermit the quantitative analysis of CFTR function in gene deliverytrials and high-throughput screening of compounds for correction of thecystic fibrosis phenotype.

     

Actin filament binding by a monomeric IQGAP1 fragment with a single calponin homology domain

IQGAP1 is a homodimeric protein that reversibly associates with F-actin, calmodulin, activated Cdc42 and Rac1, CLIP-170, beta-catenin, and E-cadherin. Its F-actin binding site includes a calponin homology domain (CHD) located near the N-terminal of each subunit. Prior studies have implied that medium- to high-affinity F-actin binding (5-50 microM K(d)) requires multiple CHDs located either on an individual polypeptide or on distinct subunits of a multimeric protein. For IQGAP1, a series of six tandem IQGAP coiled-coil repeats (IRs) located past the C-terminal of the CHD of each subunit support protein dimerization and, by extension, the IRs or an undefined subset of them were thought to be essential for F-actin binding mediated by its CHDs. Here we describe efforts to determine the minimal region of IQGAP1 capable of binding F-actin. Several truncation mutants of IQGAP1, which contain progressive deletions of the IRs and CHD, were assayed for F-actin binding in vitro. Fragments that contain both the CHD and at least one IR could bind F-actin and, as expected, removal of all six IRs and the CHD abolished binding. Unexpectedly, a fragment called IQGAP1(2-210), which contains the CHD, but lacks IRs, could bind actin filaments. IQGAP1(2-210) was found to be monomeric, to bind F-actin with a K(d) of approximately 47 microM, to saturate F-actin at a molar ratio of one IQGAP1(2-210) per actin monomer, and to co-localize with cortical actin filaments when expressed by transfection in cultured cells. These collective results identify the first known example of high-affinity actin filament binding mediated by a single CHD.     

Sex- and lineage-specific inheritance of depression-like behavior in the rat

The Wistar–Kyoto (WKY) rat exhibits physiological and behavioral similarities to endophenotypes of human depression. In the forced swim test (FST), a well-characterized antidepressant-reversible test for behavioral despair in rodents, WKYs express characteristics of behavioral despair; increased immobility, and decreased climbing. To map genetic loci linked to behavior in the FST, we conducted a quantitative trait loci (QTL) analysis of the segregating F2 generation of a WKY × Fisher 344 (F344) reciprocal intercross. Using linear-model-based genome scans to include covariate (sex or lineage)-by-QTL interaction effects, four significant QTL influencing climbing behavior were identified. In addition, we identified three, seven, and two suggestive QTL for climbing, immobility, and swimming, respectively. One of these loci was pleiotropic, affecting both immobility and climbing. As found in human linkage studies, several of these QTL showed sex- and/or lineage-dependent effects. A simultaneous search strategy identified three epistatic locus pairs for climbing. Multiple regression analysis was employed to characterize the joint contributions of these QTL and to clarify the sex- and lineage-dependent effects. As expected for complex traits, FST behavior is influenced by multiple QTL of small effect, each contributing 5%–10%, accounting for a total 10%–30% of the phenotypic variance. A number of loci mapped in this study share overlapping candidate regions with previously identified emotionality QTL in mice as well as with susceptibility loci recognized by linkage or genome scan analyses for major depression or bipolar disorder in humans. The presence of these loci across species suggests that these QTL may represent universal genetic factors contributing to mood disorders.     

Functional equivalence of dihydropyridine receptor alpha1S and beta1a subunits in triggering excitation-contraction coupling in skeletal muscle

Molecular understanding of the mechanism of excitation-contraction (EC) coupling in skeletal muscle has been made possible by cultured myotube models lacking specific dihydropyridine receptor (DHPR) subunits and ryanodine receptor type 1 (RyR1) isoforms. Transient expression of missing cDNAs in mutant myotubes leads to a rapid recovery, within days, of various Ca2+ current and EC coupling phenotypes. These myotube models have thus permitted structure-function analysis of EC coupling domains present in the DHPR controlling the opening of RyR1. The purpose of this brief review is to highlight advances made by this laboratory towards understanding the contribution of domains present in alpha1S and beta1a subunits of the skeletal DHPR to EC coupling signaling. Our main contention is that domains of the alpha1S II-III loop are necessary but not sufficient to recapitulate skeletal-type EC coupling. Rather, the structural unit that controls the EC coupling signal appears to be the alpha1S/beta1a pair.     

Novel substituted 4-phenyl-[1,3]dioxanes: potent and selective orexin receptor 2 (OX(2)R) antagonists

Orexins, also termed hypocretins, consist of two neuropeptide agonists (orexin A and B) interacting with two known G-protein coupled receptors (OX(1)R and OX(2)R). In addition to other biological functions, the orexin-2 receptor is thought to be an important modulator of sleep and wakefulness. Herein we describe a series of novel, selective OX(2)R antagonists consisting of substituted 4-phenyl-[1,3]dioxanes. One such antagonist is compound 9, 1-(2,4-dibromo-phenyl)-3-((4S,5S)-2,2-dimethyl-4-phenyl-[1,3]dioxan-5-yl)-urea, which is bound by the OX(2)R with a pK(i) of 8.3, has a pK(b) of 7.9, and is 600-fold selective for the OX(2)R over the OX(1)R.     

Leveraging two-way probe-level block design for identifying differential gene expression with high-density oligonucleotide arrays

Background  

To identify differentially expressed genes across experimental conditions in oligonucleotide microarray experiments, existing statistical methods commonly use a summary of probe-level expression data for each probe set and compare replicates of these values across conditions using a form of the t-test or rank sum test. Here we propose the use of a statistical method that takes advantage of the built-in redundancy architecture of high-density oligonucleotide arrays.