Spontaneous Exciton Dissociation at Organic Semiconductor Interfaces Facilitated by the Orientation of the Delocalized Electron–Hole Wavefunction

In organic semiconductors, optical excitation does not necessarily produce free carriers. Very often, electron and hole are bound together to form an exciton. Releasing free carriers from the exciton is essential for the functioning of photovoltaics and optoelectronic devices, but it is a bottleneck process because of the high exciton binding energy. Inefficient exciton dissociation can limit the efficiency of organic photovoltaics. Here, nanoscale features that can allow the free carrier generation to occur spontaneously despite being an energy uphill process are determined. Specifically, by comparing the dissociation dynamics of the charge transfer (CT) exciton at two donor–acceptor interfaces, it is found that the relative orientation of the electron and hole wavefunction within a CT exciton plays an important role in determining whether the CT exciton will decompose into the higher energy free electron–hole pair or relax to the lower energy tightly‐bound CT exciton. The concept of the entropic driving force is combined with the structural anisotropy of typical organic crystals to devise a framework that can describe how the orientation of the delocalized electronic wavefunction can be manipulated to favor the energy‐uphill spontaneous dissociation of CT excitons over the energy‐downhill CT exciton cooling.     

Perovskite Solar Cells go Outdoors: Field Testing and Temperature Effects on Energy Yield

Perovskite solar cells (PSC) have shown that under laboratory conditions they can compete with established photovoltaic technologies. However, controlled laboratory measurements usually performed do not fully resemble operational conditions and field testing outdoors, with day‐night cycles, changing irradiance and temperature. In this contribution, the performance of PSCs in the rooftop field test, exposed to real weather conditions is evaluated. The 1 cm² single‐junction devices, with an initial average power conversion efficiency of 18.5% are tracked outdoors in maximum power point over several weeks. In parallel, irradiance and air temperature are recorded, allowing us to correlate outside factors with generated power. To get more insight into outdoor device performance, a comprehensive set of laboratory measurements under different light intensities (10% to 120% of AM1.5) and temperatures is performed. From these results, a low power temperature coefficient of ?0.17% K^?1 is extracted in the temperature range between 25 and 85 °C. By incorporating these temperature‐ and light‐dependent PV parameters into the energy yield model, it is possible to correctly predict the generated energy of the devices, thus validating the energy yield model. In addition, degradation of the tested devices can be tracked precisely from the difference between measured and modelled power.     

Indoor Thin‐Film Photovoltaics: Progress and Challenges

Energy generation and consumption have always been an important component of social development. Interests in this field are beginning to shift to indoor photovoltaics (IPV) which can serve as power sources under low light conditions to meet the energy needs of rapidly growing fields, such as intelligence gathering and information processing which usually operate via the Internet‐of‐things (IoT). Since the power requirements for this purpose continue to decrease, IPV systems under low light may facilitate the realization of self‐powered high‐tech electronic devices connected through the IoT. This review discusses and compares the characteristics of different types of IPV devices such as those based on silicon, dye, III‐V semiconductors, organic compounds, and halide perovskites. Among them, specific attention is paid to perovskite photovoltaics which may potentially become a high performing IPV system due to the fascinating photophysics of the halide perovskite active layer. The limitations of such indoor application as they relate to the toxicity, stability, and electronic structure of halide perovskites are also discussed. Finally, strategies which could produce highly functional, nontoxic, and stable perovskite photovoltaics devices for indoor applications are proposed.     

PVP Treatment Induced Gradient Oxygen Doping in In2S3 Nanosheet to Boost Solar Water Oxidation of WO3 Nanoarray Photoanode

The photoelectrochemical performance of the WO₃ photoanode is limited by the severe charge recombination in the bulk phase and at the WO₃/electrolyte interface. Herein, In₂S₃ nanosheets are integrated onto the surface of the WO₃ nanowall array photoanode, followed by a facile polyvinylpyrrolidone (PVP) solution treatment. The PVP treatment results in sulfur vacancies and a gradient oxygen doping into In₂S₃ from surface to interior, which induces the formation of a gradient energy band distribution. The gradient band structured In₂S₃ and type II band alignment at the WO₃/In₂S₃ interface simultaneously create a channel that favors photogenerated electrons to migrate from the surface to the conductive substrate, thereby suppressing bulk carrier recombination. Meanwhile, the sulfur vacancies and oxygen doping contribute to increased charge carrier concentration, prolonged carrier lifetime, more active sites, and small interfacial transfer impedance. As a consequence, the PVP treated WO₃/In₂S₃ heterostructure photoanode exhibits a significantly enhanced photocurrent of 1.61 mA cm^?2 at 1.23 V versus reversible hydrogen electrode (RHE) and negative onset potential of 0.02 V versus RHE.     

Accelerating Atomic Catalyst Discovery by Theoretical Calculations‐Machine Learning Strategy

Atomic catalysts (AC) are emerging as a highly attractive research topic, especially in sustainable energy fields. Lack of a full picture of the hydrogen evolution reaction (HER) impedes the future development of potential electrocatalysts. In this work, the systematic investigation of the HER process in graphdyine (GDY) based AC is presented in terms of the adsorption energies, adsorption trend, electronic structures, reaction pathway, and active sites. This comprehensive work innovatively reveals GDY based AC for HER covering all the transition metals (TM) and lanthanide (Ln) metals, enabling the screening of potential catalysts. The density functional theory (DFT) calculations carefully explore the HER performance beyond the comparison of sole H adsorption. Therefore, the screened catalysts candidates not only match with experimental results but also provide significant references for novel catalysts. Moreover, the machine learning (ML) technique bag‐tree approach is innovatively utilized based on the fuzzy model for data separation and converse prediction of the HER performance, which indicates a similar result to the theoretical calculations. From two independent theoretical perspectives (DFT and ML), this work proposes pivotal guidelines for experimental catalyst design and synthesis. The proposed advanced research strategy shows great potential as a general approach in other energy‐related areas.     

New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling

Lithium–sulfur batteries (LSBs) are considered promising candidates for the next‐generation energy‐storage systems due to their high theoretical capacity and prevalent abundance of sulfur. Their reversible operation, however, encounters challenges from both the anode, where dendritic and dead Li‐metal form, and the cathode, where polysulfides dissolve and become parasitic shuttles. Both issues arise from the imperfection of interphases between electrolyte and electrode. Herein, a new lithium salt based on an imide anion with fluorination and unsaturation in its structure is reported, whose interphasial chemistries resolve these issues simultaneously. Lithium 1, 1, 2, 2, 3, 3‐hexafluoropropane‐1, 3‐disulfonimide (LiHFDF) forms highly fluorinated interphases at both anode and cathode surfaces, which effectively suppress formation of Li‐dendrites and dissolution/shuttling of polysulfides, and significantly improves the electrochemical reversibility of LSBs. In a broader context, this new Li salt offers a new perspective for diversified beyond Li‐ion chemistries that rely on a Li‐metal anode and active cathode materials.     

脑缺血大鼠肺组织NGF/TrkA表达变化及其意义

目的:探讨大鼠脑缺血后肺组织神经生长因子(nerve growth factor,NGF)/酪氨酸蛋白激酶A(tropomyosin-related kinase A,TrkA)表达的变化。方法:成年雄性大鼠随机分为假手术组和脑缺血后6 h、24 h及48 h组,每组8只。建立大脑中动脉永久性局灶性缺血模型,术后于各时间点麻醉处死大鼠后,测定肺组织湿重/干重(W/D),光镜下观察HE染色肺组织病理学改变;Western blot法检测肺组织NGF、TrkA蛋白表达。结果:与假手术组相比,脑缺血后6 h肺组织W/D有增加,差异无统计学意义(P>0.05),而脑缺血后24 h及48 h肺组织W/D均有显著增高(P<0.05),其中以24 h组最明显(P<0.01);脑缺血后6 h肺组织出现轻度充血、水肿及炎性改变,24 h及48 h组肺泡结构破坏明显。病理学评分结果显示,脑缺血后24 h及48 h组大鼠肺组织病理评分较假手术组显著升高(P<0.05);Western blot法显示,脑缺血6 h肺组织中NGF表达增加(P<0.05),48 h时表达有下降趋势,但仍高于假手术组(P<0.05)。而肺组织中TrkA表达在脑缺血6h有下降(P>0.05),24 h下降明显(P<0.05),48 h时TrkA蛋白表达虽有上升,仍显著低于假手术组(P<0.05)。结论:大鼠肺组织NGF/TrkA的动态变化可能参与了脑缺血后肺损伤的病理生理过程。     

超微血流成像术用于肾移植患者术后评估的临床价值分析

目的:探讨超微血流成像术用于肾移植患者术后评估的临床价值。方法:选取我院2019年2月-2019年8月收治的60例肾移植患者的临床资料,根据术后恢复情况分为A、B、C三组,A组(27例,术后肾功能恢复良好)、B组(20例,术后发生过敏肾功能异常病变但治疗后肾功恢复正常)、C组(13例,术后血肌酐水平持续增高肾功能异常者),三组均采用超微血管流成像术检测血管指数,比较不同组患者的血管指数并分析其与血肌酐水平的关系。结果:三组患者的肾移植长径、前后径、左右径、皮质厚度、叶间动脉阻力指数比较无显著差异(P0.05)。C组患者的肾皮质血管指数(23.34±6.03%)明显低于A组(33.23±3.45%)、B组(31.23±4.23%)(P0.05)。肾功能异常患者肾皮质的血管指数较低,且随着血肌酐水平的升高而下降,两者呈显著负相关(r=-0.23,P0.05)。结论:超声微血流成像术用于肾移植患者术后评估可较好地反映肾皮质血供及术后肾功能的变化。     

原发性子宫大B细胞淋巴瘤一例报告及文献复习

摘要 目的：总结原发性子宫恶性淋巴瘤的临床表现、影像及病理学特点,以期提高对原发性子宫恶性淋巴瘤的认识及诊治水平。方法：通过PubMed、万方、维普、中国知网数据库检索2001年1月至2019年12月报道的原发性子宫恶性淋巴瘤的文献,结合首都医科大学附属北京妇产医院收治的1例原发性子宫大B细胞淋巴瘤的病例资料,对此类患者临床表现、影像及病理学特点、治疗方案及预后进行总结。结果：患者女,64岁,发现盆腔肿物半月伴有绝经后阴道流血,盆腔CT提示：宫体与宫颈局部巨大团块状软组织密度灶,宫底及宫体上段可见内膜。宫腔镜下组织活检病理：（宫内物）符合低分化恶性肿瘤,结合免疫组化结果,诊断原发性子宫大B细胞淋巴瘤。行开腹全子宫及双侧附件、大网膜及腹膜后淋巴结清扫术,术后接受CHOP方案化疗六程,现治疗后随访17月,未发现复发。结论：原发性子宫恶性淋巴瘤极少见,组织学上以大B 细胞淋巴瘤为主,临床表现缺乏特异性。最终需要结合免疫组化确诊。该疾病恶性程度高,治疗上以根治性手术联合化疗为主,预后较差。