Growth of sebaceous cells in monolayer culture

Summary Rat preputial cells were grown in an epithelial cell primary monolayer culture system identical to that used for culturing epidermal cells, which were studied for comparison. Despite similar appearance when observed by phase contrast microscopy, other features identified the preputial cells as a unique epithelial cell population. Preputial cells grew as a relatively small number of large colonies, formed domes before confluence, and expressed a specific acinar keratin, K4, which had previously been found in human sebaceous glands. In addition, preputial cells formed fewer cornified envelopes than epidermal cells, too few to discern the reduction of envelope formation by retinoic acid treatment in vitro which was found in epidermal cells. Rat preputial cells in monolayer culture, therefore, are a promising model for studying the effects of hormones on sebaceous cell growth and differentiation.     

Divergence of protamine gene sequences in fish

Complementary DNA to trout protamine mRNA was hybridized to excess genomic DNA from trout, salmon and yellow perch. Although there was extensive hybridization of the cDNA to trout DNA, no cross-reaction with yellow perch DNA was observed and the hybridization to salmon DNA was noticeably less than in the homologous reaction. To confirm these results, yellow perch protamine mRNA was purified and compared directly to trout protamine mRNA. Yellow perch protamine mRNA was shorter than trout protamine mRNA, when measured by agarose gel electrophoresis in the presence of methyl mercury hydroxide. The two mRNAs did not cross-react in cDNA/RNA hybridizations, although the homologous reactions went to 90% of completion. This lack of sequence homology was confirmed when the oligopyrimidine tracts from the cDNAs were compared. No sequences longer than tetranucleotides were common to both species. Trout protamine cDNA contained oligopyrimidines of composition C₇T₄, C₄T₂, C₃T₂, C₂T₄, C₂T₃, C₁T₅ and C₁T whereas yellow perch protamine cDNA contained C₆T₃ and C₄T₃.     

113Cd nmr study of the metal cluster structure of human liver metallothionein

Cadmium-113 nuclear magnetic resonance (¹¹³Cd nmr) was used to elucidate the structural properties of the cadmium binding sites in human liver metallothionein. The isotopically labeled ¹¹³Cd-metallothionein was prepared by the in vitro exchange of the native metals (greater than 94% zinc) for ¹¹³CdCl₂ during isolation. The two isoproteins, MT-1 and MT-2, showed ¹¹³Cd nmr resonances in the chemical shift range 610–670 ppm. The multiplet structure of the resonances is due to two bond scalar interactions between adjacent ¹¹³Cd ions linked by cysteine thiolate ligands. Homonuclear ¹¹³Cd decoupling experiments allowed the determination of the metal cluster structure, which, similar to the rabbit liver metallothionein, consists of a four- and a three-metal cluster designated cluster A and cluster B, respectively. Chemical shift similarities in the ¹¹³Cd nmr spectra of the human, rabbit and calf liver MT-1 and MT-2 are observed, especially for cluster A. Small variations in chemical shifts are explained in terms of differences in the primary structure between the two human isoproteins.     

Adenovirus assembly: self-assembly of partially digested hexons.

Papainic hydrolysis of adenovirus type 2 hexon capsomers was apparently limited and induced self-aggregation of hexons in a preferred oligomeric species, hexon trimers, sedimenting at about 19X, and retaining their immunological properties. These hexon trimers were composed of two classes of trimer molecules with different electric charges. The relevance of this trimer aggregation phenomenon to the adenovirus assembly process is discussed.     

Testing the precision and sensitivity of density estimates obtained with a camera‐trap method revealed limitations and opportunities

The use of camera traps in ecology helps affordably address questions about the distribution and density of cryptic and mobile species. The random encounter model (REM) is a camera‐trap method that has been developed to estimate population densities using unmarked individuals. However, few studies have evaluated its reliability in the field, especially considering that this method relies on parameters obtained from collared animals (i.e., average speed, in km/h), which can be difficult to acquire at low cost and effort. Our objectives were to (1) assess the reliability of this camera‐trap method and (2) evaluate the influence of parameters coming from different populations on density estimates. We estimated a reference density of black bears (Ursus americanus) in Forillon National Park (Québec, Canada) using a spatial capture–recapture estimator based on hair‐snag stations. We calculated average speed using telemetry data acquired from four different bear populations located outside our study area and estimated densities using the REM. The reference density, determined with a Bayesian spatial capture–recapture model, was 2.87 individuals/10km² [95% CI: 2.41–3.45], which was slightly lower (although not significatively different) than the different densities estimated using REM (ranging from 4.06–5.38 bears/10km² depending on the average speed value used). Average speed values obtained from different populations had minor impacts on REM estimates when the difference in average speed between populations was low. Bias in speed values for slow‐moving species had more influence on REM density estimates than for fast‐moving species. We pointed out that a potential overestimation of density occurs when average speed is underestimated, that is, using GPS telemetry locations with large fix‐rate intervals. Our study suggests that REM could be an affordable alternative to conventional spatial capture–recapture, but highlights the need for further research to control for potential bias associated with speed values determined using GPS telemetry data.     

Distribution of lung density after strenuous, prolonged exercise.

The postexercise alteration in pulmonary gas exchange in high-aerobically trained subjects depends on both the intensity and the duration of exercise (G. Manier, J. Moinard, and H. Sto?cheff. J. Appl. Physiol. 75: 2580-2585, 1993; G. Manier, J. Moinard, P. Techoueyres, N. Varène, and H. Guénard. Respir. Physiol. 83: 143-154, 1991). In a recent study that used lung computerized tomography (CT), evidence was found for accumulation of water within the lungs after exercise (C. Caillaud, O. Serre-Cousine, F. Anselme, X. Capdevilla, and C. Prefaut. J. Appl. Physiol. 79: 1226-1232, 1995). On representative slices of the lungs, mean lung density increased by 0.040 +/- 0.007 g/cm(3) (19%, P < 0.001) in athletes after a triathlon. To verify and quantify the mechanism, we determined the change in pulmonary density and mass after strenuous and prolonged exercise using another exercise protocol and methodology for CT scanning. Nine trained runners (age 30-46 yr) volunteered to participate in the study. Each subject ran for 2 h on a treadmill at a rate corresponding to 75% of maximum O(2) consumption. CT measurements were made before and immediately after the exercise test with the subject supine and holding his breath at a point close to functional residual capacity. The lungs were scanned from the apex to the diaphragm and reconstructed in 8-mm-thick slices. Attenuation values of X-rays in each part of the lung were expressed in Hounsfield units (HU), which are related to density (D): D = 1 + HU/1,000. No significant alteration in pulmonary density (0.37 +/- 0.04 vs. 0.35 +/- 0.03, not significant) was observed after the 2-h run test. Although lung volume slightly increased (change of 166 +/- 205 ml, P < 0.05), lung mass remained stable because of a change in density distribution. We failed to detect any changes in postexercise lung mass, suggesting that other mechanisms need to be considered to explain the observed alterations in pulmonary gas exchange after prolonged strenuous exercise.     

A Chemical Proteomics Approach for the Search of Pharmacological Targets of the Antimalarial Clinical Candidate Albitiazolium in Plasmodium falciparum Using Photocrosslinking and Click Chemistry

Plasmodium falciparum is responsible for severe malaria which is one of the most prevalent and deadly infectious diseases in the world. The antimalarial therapeutic arsenal is hampered by the onset of resistance to all known pharmacological classes of compounds, so new drugs with novel mechanisms of action are critically needed. Albitiazolium is a clinical antimalarial candidate from a series of choline analogs designed to inhibit plasmodial phospholipid metabolism. Here we developed an original chemical proteomic approach to identify parasite proteins targeted by albitiazolium during their native interaction in living parasites. We designed a bifunctional albitiazolium-derived compound (photoactivable and clickable) to covalently crosslink drug–interacting parasite proteins in situ followed by their isolation via click chemistry reactions. Mass spectrometry analysis of drug–interacting proteins and subsequent clustering on gene ontology terms revealed parasite proteins involved in lipid metabolic activities and, interestingly, also in lipid binding, transport, and vesicular transport functions. In accordance with this, the albitiazolium-derivative was localized in the endoplasmic reticulum and trans-Golgi network of P. falciparum. Importantly, during competitive assays with albitiazolium, the binding of choline/ethanolamine phosphotransferase (the enzyme involved in the last step of phosphatidylcholine synthesis) was substantially displaced, thus confirming the efficiency of this strategy for searching albitiazolium targets.