In vitro stabilization of 6-methylsalicylic acid synthetase from Penicillium urticae

In continuing studies of patulin biosynthesis, the first enzyme of the pathway, 6-methylsalicylic acid synthetase, was found to be far more labile than were the later enzymes of the pathway. Attempts were made to stabilize 6-methylsalicylic acid synthetase in vitro. The combined addition of the cofactor NADPH, the substrates acetyl-CoA and malonyl-CoA, the reducing agent dithiothreitol, and the proteinase inhibitor phenylmethylsulfonyl fluoride to cell-free extracts was found to prolong the half-life of the enzyme as much as 12-fold. This suggested that proteolysis and the conformational integrity of the enzyme may play an important role in controlling the duration of antibiotic biosynthesis in vivo. This was in agreement with the finding that the intracellular proteinase content of antibiotic-producing cells of Penicillium urticae rapidly increased just before the loss of 6-methylsalicylic acid synthetase content. These in vitro stabilization studies have provided some insight into the metabolic conditions that may stabilize these enzymes in vivo, and into possible ways of extending the life of these catalysts.     

Photooxidation of dinitrophenylhistidine-200 human carbonic anhydrase B.

Partial inactivation of tau-dinitrophenylhistidine-200 human carbonic anhydrase B, induced by visible light, followed first order kinetics (k(app) = 6.05 times 10-2 min-1). After 50 min the tau-dinitrophenylhistidine (tau-DNP-histidine) content decreased to a negligible level, but the illuminated enzyme retained, at pH 7.6, approximately 9.2 percent of the esterase activity of the native enzyme. The following lines of evidence suggest that the loss of activity results from the destruction of tau-DNP-histidine-200. (1) No significant loss of amino acid other than tau-DNP-histidine was detected after illumination. (2) The rate of loss of activity correlated well with the loss of tau-DNP-histidine. (3) In the photooxidized enzyme the DNP moiety was retained but had lost the characteristic sensitivity of tau-DNP-histidine to nucleophilic attack. Titration of the illuminated enzyme with acetazolamide indicated that the residual activity is an intrinsic property of the modified enzyme. The chromatographically purified photooxidized enzyme migrated as a single band on isoelectrofocusing in polyacylamide gel, and at pH 7.6 possessed 7.5 percent esterase activity relative to the native enzyme. By establishing effective destruction of histidine-200, it can be concluded that neither the pi N nor, as previously shown, the tau N of histidine-200 is critical for the catalysis.     

Effect of hyperthermia on growth of Ehrlich ascites tumor cells

Hyperthermic treatment at 43 degrees C suppressed the growth of Ehrlich ascites tumor (EAT) cells in vitro. Incubation of EAT cells at 43 degrees C for as little as 1.5 h totally abolished the transplantability of the tumor. At the same time, the rate of cellular glucose uptake, the density of glucose transporter on the cells as well as the extent of thymidine, uridine and leucine incorporation were significantly reduced.     

Occupancy of an adhesive glycoprotein receptor modulates expression of an antigenic site involved in cell adhesion

Binding of ligands that contain Arg-Gly-Asp to adhesion receptors induces cell spreading and aggregation and alters gene expression, possibly due to conformational changes within occupied adhesion receptors. PMI-1 is a monoclonal antibody which reacts with the platelet fibrinogen receptor, glycoprotein IIb-IIIa, and reports such a conformational change. ADP stimulation of platelets results in a fibrinogen-dependent increase in binding of the PMI-1 antibody. Peptides containing Arg-Gly-Asp also reversibly increase the binding of this antibody to cells and to purified glycoprotein IIb-IIIa. The PMI-1 antibody inhibits platelet adhesion and spreading on certain substrata (Shadle, P. J., Ginsberg, M. H., Plow, E. F., and Barondes, S. H. (1984) J. Cell Biol. 99, 2056-2060); thus this occupancy-modulated site may participate in adhesive function.     

The identification of a distinct export step following the biosynthesis of leukotriene C4 by human eosinophils

We have examined the requirements for the export of leukotriene C4 (LTC4) from cultured human eosinophils. To define saturability and kinetics of LTC4 export, eosinophils were interacted with leukotriene A4 (LTA4) at 37 degrees C, and the methanolic extracts of the cell-associated and extracellular compartments were then analyzed for LTC4 content by reverse phase high performance liquid chromatography with on-line monitoring of absorbance at 280 nm. When LTA4 was added at concentrations from 0 to 100 microM for 10 min at 37 degrees C, the amount of LTC4 released extracellularly became constant at an LTA4 concentration of 7.5 microM or greater even though the amount of intracellular LTC4 continued to increase. When eosinophils were incubated with 50 microM LTA4 for 0-60 min at 37 degrees C and then held at 0 degrees C for the remainder of the 60-min interval, 54.2 and 77.3% (n = 3), respectively, of the total LTC4 was released extracellularly after 15 and 30 min of incubation at 37 degrees C. Eosinophils incubated with 50 microM LTA4 at 0 degrees C for 1 h synthesized 290 pmol of LTC4 (n = 3) which was approximately half-maximal, all of which was retained intracellularly. We utilized the time and temperature dependence of LTC4 export to preload eosinophils with both LTC4 and leukotriene C5 (LTC5) by sequentially supplying them with specific substrates. With increasing concentrations of intracellular LTC5, there was dose-dependent inhibition of the subsequent release of LTC4 at 37 degrees C, with the sum of the released glutathionyl leukotrienes remaining constant. In addition, only minimal competition for LTC4 release occurred when cells were preloaded with both LTC4 and the conjugate of 1-chloro-2,4-dinitrobenzene and reduced glutathione, S-(dinitrophenyl)glutathione. The criteria of saturability, time dependence of LTC4 release at 37 degrees C, competition of LTC4 with LTC5 for release, and the inhibition of LTC4 release at 0 degrees C establish the export of LTC4 from cells as a novel and specific biochemical step distinct from both LTA4 uptake and the conjugation of LTA4 with reduced glutathione by LTC4 synthase to form LTC4.     

Use of Adenosine 5′-Triphosphate as an Indicator of the Microbiota Biomass in Rumen Contents

A number of techniques were tested for their efficiency in extracting adenosine 5′-triphosphate (ATP) from strained rumen fluid (SRF). Extraction with 0.6 N H₂SO₄, using a modification of the procedure described by Lee et al. (1971), was the most efficient and was better suited for extracting particulate samples. Neutralized extracts could not be stored frozen before assaying for ATP because large losses were incurred. The inclusion of internal standards was necessary to correct for incomplete recovery of ATP. The ATP concentration in rumen contents from a cow receiving a ration of dried roughage (mainly alfalfa hay) ranged from 31 to 56 μg of ATP per g of contents. Approximately 75% of the ATP was associated with the particulate material. The ATP was primarily of microbial origin, since only traces of ATP were present in the feed and none was found in “cell-free” rumen fluid. Fractionation of the bacterial and protozoal populations in SRF resulted in the isolation of an enriched protozoal fraction with a 10-fold higher ATP concentration than that of the separated rumen bacteria. The ATP pool sizes of nine functionally important rumen bacteria during the exponential phase of growth ranged from 1.1 to 17.6 μg of ATP per mg of dry weight. This information indicates that using ATP as a measure of microbial biomass in rumen contents must be done with caution because of possible variations in the efficiency of extraction of ATP from rumen contents and differences in the concentration of ATP in rumen microbes.     

Chemical synthesis of [32P]pyrophosphate with high specific activity

Graphical methods have traditionally been the principal means for estimation of parameters (e.g., affinity constants, cooperativity parameters, and concentrations of receptor sites) in enzymology and ligand-binding problems. The present report provides a review of these methods as well as new results, as applied to three coordinate systems popularly used in ligand-binding studies: $\text{B}\text{F}$ vs [Bound]. $\text{B}\text{F}$ vs [Free], and $\text{B}\text{F}$ vs [Total]. We consider two extremely general models, the statistical mechanical model and the Adair model for equilibrium ligand binding. We also consider a very specialized case of receptor interaction wherein the equilibrium constannt of dissociation is linearly related to receptor occupancy. We collect previously described equations and derive new ones, to enable the user to estimate the parameters of the models in terms of relatively easily measurable graphical characteristics. We have evaluated the performance of these methods in representative cases using Monte Carlo studies. The results indicate the kind of precision and accuracy which can be obtained with typical experimental designs. Depending upon the magnitude of experimental error, the graphical methods can provide dependable values for the binding parameters. However, in general, the results obtained by the graphical methods should be regarded as reasonable initial estimates for further refinement by weighted nonlinear least-squares curve fitting.