Improved tolerance to bile salts of aggregated Bifidobacterium longum produced during continuous culture with immobilized cells

The effect of cell immobilization and continuous culture was studied on selected physiological and technological characteristics of Bifidobacterium longum NCC2705 cultivated for 20 days in a two stage continuous fermentation system. Continuous immobilized cell (IC) cultures with and without glucose limitation exhibited formation of macroscopic cell aggregates after 12 and 9 days, respectively. Auto-aggregation resulted in underestimation of viable cell counts by plate counts by more than 2 log units CFU/ml compared with qPCR method. Modifications of cell membrane composition might partially explain aggregate formation in IC cultures. Decreases in the ratio of unsaturated to saturated fatty acid content from 1.74 to 0.58 might also contribute to the enhanced tolerance of IC cells to porcine bile salts and aminoglycosidic antibiotics compared with free cells from batch cultures.The enhanced resistance against bile salts in combination with auto-aggregation may confer an advantage to probiotic bacteria produced by IC technology.     

A dynamical study of the mechanical stimuli and tissue differentiation within a CaP scaffold based on micro-CT finite element models

The control of the mechanical stimuli transmitted to the cells is critical for the design of functional scaffolds for tissue engineering. The objective of this study was to investigate the dynamics of the mechanical stimuli transmitted to the cells during tissue differentiation in an irregular morphology scaffold under compressive load and perfusion flow. A calcium phosphate-based glass porous scaffold was used. The solid phase and the fluid flow within the pores were modeled as linear elastic solid material and Newtonian fluid, respectively. In the fluid model, different levels of viscosity were used to simulate tissue differentiation. Compressive strain of 0.5% and fluid flow with constant inlet velocity of 10 μm/s or constant inlet pressure of 3 Pa were applied. Octahedral shear strain and fluid shear stress were used as mechano-regulatory stimuli. For constant inlet velocity, stimuli equivalent to bone were predicted in 80% of pore volume for the case of low tissue viscosity. For the cases of high viscosity, fluctuations between stimuli equivalent to tissue formation and cell death were predicted due to the increase in the fluid shear stress when tissue started to fill pores. When constant pressure was applied, stimuli equivalent to bone were predicted in 62% of pore volume when low tissue viscosity was used and 42% when high tissue viscosity was used. This study predicted critical variations of fluid shear stress when cells differentiated. If these variations are not controlled in vitro, they can impede the formation of new matured tissue.     

Independent roles of apical membrane antigen 1 and rhoptry neck proteins during host cell invasion by apicomplexa

During invasion, apicomplexan parasites form an intimate circumferential contact with the host cell, the tight junction (TJ), through which they actively glide. The TJ, which links the parasite motor to the host cell cytoskeleton, is thought to be composed of interacting apical membrane antigen 1 (AMA1) and rhoptry neck (RON) proteins. Here we find that, in Plasmodium berghei, while both AMA1 and RON4 are important for merozoite invasion of erythrocytes, only RON4 is required for sporozoite invasion of hepatocytes, indicating that RON4 acts independently of AMA1 in the sporozoite. Further, in the Toxoplasma gondii tachyzoite, AMA1 is dispensable for normal RON4 ring and functional TJ assembly but enhances tachyzoite apposition to the cell and internalization frequency. We propose that while the RON proteins act at the TJ, AMA1 mainly functions on the zoite surface to permit correct attachment to the cell, which may facilitate invasion depending on the zoite-cell combination.     

Kinetics of tetramolecular quadruplexes

The melting of tetramolecular DNA or RNA quadruplexes is kinetically irreversible. However, rather than being a hindrance, this kinetic inertia allows us to study association and dissociation processes independently. From a kinetic point of view, the association reaction is fourth order in monomer and the dissociation first order in quadruplex. The association rate constant k_on, expressed in M⁻³·s⁻¹ decreases with increasing temperature, reflecting a negative activation energy (E_on) for the sequences presented here. Association is favored by an increase in monocation concentration. The first-order dissociation process is temperature dependent, with a very positive activation energy E_off, but nearly ionic strength independent. General rules may be drawn up for various DNA and RNA sequence motifs, involving 3–6 consecutive guanines and 0–5 protruding bases. RNA quadruplexes are more stable than their DNA counterparts as a result of both faster association and slower dissociation. In most cases, no dissociation is found for G-tracts of 5 guanines or more in sodium, 4 guanines or more in potassium. The data collected here allow us to predict the amount of time required for 50% (or 90%) quadruplex formation as a function of strand sequence and concentration, temperature and ionic strength.     

Thermal difference spectra: a specific signature for nucleic acid structures

We show that nucleic acid structures may be conveniently and inexpensively characterized by their UV thermal difference spectra. A thermal difference spectrum (TDS) is obtained for a nucleic acid by simply recording the ultraviolet absorbance spectra of the unfolded and folded states at temperatures above and below its melting temperature (T_m). The difference between these two spectra is the TDS. The TDS has a specific shape that is unique for each type of nucleic acid structure, a conclusion that is based on a comparison of >900 spectra from 200 different sequences. The shape of the TDS reflects the subtleties of base stacking interactions that occur uniquely within each type of nucleic acid structure. TDS provides a simple, inexpensive and rapid method to obtain structural insight into nucleic acid structures, which is applicable to both DNA and RNA from short oligomers to polynucleotides. TDS complements circular dichroism as a tool for the structural characterization of nucleic acids in solution.     

The effect of chemical modifications on the thermal stability of different G-quadruplex-forming oligonucleotides

A systematic study of the thermal and conformational properties of chemically modified G-quadruplexes of different molecularities is reported. The effect of backbone charge and atom size, thymine/uracyl substitution as well as the effect of modification at the ribose 2′-position was analyzed by UV spectroscopy. Additional calorimetric studies were performed on different modified forms of the human telomeric sequence. Determination of the differential spectra allowed more insights into the conformational properties of the oligonucleotides. Lack of negative charge at the phosphate backbone yielded to a general destabilization of the G-quadruplex structure. On the other hand, substitution of thymine with uracyl resulted in a moderate or strong stabilization of the structure. Additional modification at the sugar 2′-position gave rise to different effects depending on the molecularity of the quadruplex. In particular, loss of hydrogen bond capacity at the 2′-position strongly affected the conformation of the G-quadruplex. Altogether, these results demonstrate that the effect of some modifications depends on the sequence context, thus providing helpful information for the use of chemically modified quadruplexes as therapeutic agents or as structural elements of supramolecular complexes.     

Quantification by real-time PCR of Lactococcus lactis subsp. cremoris in milk fermented by a mixed culture

During cheese making, interactions between different strains of lactic acid bacteria play an important role. However, few methods are available to specifically determine each bacterial population in mixed cultures, in particular for strains of the same species. The aim of this study was to develop a real-time PCR quantification method to monitor the population of Lactococcus cremoris ATCC 19257 in mixed culture with Lactobacillus rhamnosus RW-9595M and the bacteriocin-producing microorganism Lc. diacetylactis UL719. The specificity of the two primers 68FCa33 and 16SR308 used to amplify a 240-bp fragment of DNA from Lc. cremoris was demonstrated by conventional PCR. Using these primers for real-time PCR, the detection limit was 2 cfu/reaction or 200 cfu of Lc. cremoris ATCC 19257 per millilitre of mixed culture in milk. In pure culture batch fermentation, good correlation was obtained between real-time PCR and the conventional plating method for monitoring Lc. cremoris growth. In mixed culture batch fermentation, Lb. rhamnosus and Lc. cremoris decreased due to nisin Z production by Lc. diacetylactis. The decrease of the Lc. cremoris cell population detected by real-time PCR was not possible to observe by the plate count method in the presence of a Lc. diacetylactis population that was 1 log higher.     

Evaluation of a high-density oligonucleotide array for characterization of grlA, grlB, gyrA and gyrB mutations in fluoroquinolone resistant Staphylococcus aureus isolates

Using high-density oligonucleotide array technology, 30 Staphylococcus aureus strains were studied for the presence of mutations in genes involved in fluoroquinolone resistance: grlA, gyrA, grlB and gyrB. For the two most important genes, gyrA and grlA, correlation with sequencing reached 95.1%. If all genes were considered, correlation was 88.8%.     

Assessment of self-organizing maps to analyze sole-carbon source utilization profiles

The use of community-level physiological profiles obtained with Biolog microplates is widely employed to consider the functional diversity of bacterial communities. Biolog produces a great amount of data which analysis has been the subject of many studies. In most cases, after some transformations, these data were investigated with classical multivariate analyses. Here we provided an alternative to this method, that is the use of an artificial intelligence technique, the Self-Organizing Maps (SOM, unsupervised neural network). We used data from a microcosm study of algae-associated bacterial communities placed in various nutritive conditions. Analyses were carried out on the net absorbances at two incubation times for each substrates and on the chemical guild categorization of the total bacterial activity. Compared to Principal Components Analysis and cluster analysis, SOM appeared as a valuable tool for community classification, and to establish clear relationships between clusters of bacterial communities and sole-carbon sources utilization. Specifically, SOM offered a clear bidimensional projection of a relatively large volume of data and were easier to interpret than plots commonly obtained with multivariate analyses. They would be recommended to pattern the temporal evolution of communities' functional diversity.     

pSAT vectors: a modular series of plasmids for autofluorescent protein tagging and expression of multiple genes in plants

Autofluorescent protein tags represent one of the major and, perhaps, most powerful tools in modern cell biology for visualization of various cellular processes in vivo. In addition, advances in confocal microscopy and the development of autofluorescent proteins with different excitation and emission spectra allowed their simultaneous use for detection of multiple events in the same cell. Nevertheless, while autofluorescent tags are widely used in plant research, the need for a versatile and comprehensive set of vectors specifically designed for fluorescent tagging and transient and stable expression of multiple proteins in plant cells from a single plasmid has not been met by either the industrial or the academic communities. Here, we describe a new modular satellite (SAT) vector system that supports N- and C-terminal fusions to five different autofluorescent tags, EGFP, EYFP, Citrine-YFP, ECFP, and DsRed2. These vectors carry an expanded multiple cloning site that allows easy exchange of the target genes between different autofluorescence tags, and expression of the tagged proteins is controlled by constitutive promoters, which can be easily replaced with virtually any other promoter of interest. In addition, a series of SAT vectors has been adapted for high throughput Gateway recombination cloning. Furthermore, individual expression cassettes can be assembled into Agrobacterium binary plasmids, allowing efficient transient and stable expression of multiple autofluorescently tagged proteins from a single vector following its biolistic delivery or Agrobacterium-mediated genetic transformation. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.