Serum miR‐92a‐1 is a novel diagnostic biomarker for colorectal cancer

Colorectal cancer (CRC) is one of the most common cancers worldwide, with high mortality. Abnormally expressed microRNAs (miRNAs) are considered novel biomarkers in cancer diagnosis. The aim of this study was to investigate the diagnostic value of miR‐92a‐1 in patients with CRC. Serum samples were collected from 148 patients pathologically diagnosed with CRC and 68 gender‐ and age‐matched healthy volunteers. Quantitative real‐time polymerase chain reaction (qRT‐PCR) was used to measure serum miR‐92a‐1 level. Relationship between miR‐92a‐1 and clinicopathological features of CRC cases was analysed via chi‐square test. Receiver operating characteristic (ROC) curve was plotted to estimate the diagnostic value of miR‐92a‐1 in CRC. Serum miR‐92a‐1 was significantly up‐regulated in CRC patients compared with healthy individuals (P < .001). Moreover, miR‐92a‐1 expression was correlated with TNM stage (P = .02), histological stage (P = .003), lymph node metastasis (P = .003) and distant metastasis (P < .001). ROC analysis showed that the area under the ROC curve (AUC) was 0.914, suggesting high diagnostic accuracy of miR‐92a‐1 in ROC. The optimal cut‐off value was 1.485, with a sensitivity of 81.8% and a specificity of 95.6%. MiR‐92a‐1 is increased in CRC patients and correlated with aggressive clinical characteristics. Serum miR‐92a‐1 may be a potential diagnostic biomarker for CRC.     

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Single‐layered organic solar cells (OSCs) using nonfullerene acceptors have reached 16% efficiency. Such a breakthrough has inspired new sparks for the development of the next generation of OSC materials. In addition to the optimization of electronic structure, it is important to investigate the essential solid‐state structure that guides the high efficiency of bulk heterojunction blends, which provides insight in understanding how to pair an efficient donor–acceptor mixture and refine film morphology. In this study, a thorough analysis is executed to reveal morphology details, and the results demonstrate that Y6 can form a unique 2D packing with a polymer‐like conjugated backbone oriented normal to the substrate, controlled by the processing solvent and thermal annealing conditions. Such morphology provides improved carrier transport and ultrafast hole and electron transfer, leading to improved device performance, and the best optimized device shows a power conversion efficiency of 16.88% (16.4% certified). This work reveals the importance of film morphology and the mechanism by which it affects device performance. A full set of analytical methods and processing conditions are executed to achieve high efficiency solar cells from materials design to device optimization, which will be useful in future OSC technology development.     

Phosphorene as Cathode Material for High‐Voltage,Anti‐Self‐Discharge Zinc Ion Hybrid Capacitors

Output voltage and self‐discharge rate are two important performance indices for supercapacitors, which have long been overlooked, though these play a very significant role in their practical application. Here, a zinc anode is used to construct a zinc ion hybrid capacitor. Expanded operating voltage of the hybrid capacitor is obtained with novel electrolytes. In addition, significantly improved anti‐self‐discharge ability is achieved. The phosphorene‐based zinc ion capacitor exploiting a “water in salt” electrolyte with a working potential can reach 2.2 V, delivering 214.3 F g^?1 after 5000 cycles. The operating voltage is further extended to 2.5 V through the use of an organic solvent as the electrolyte; the solvent is prepared by adding 0.2 m ZnCl₂ into the tetraethylammonium tetrafluoroborate in propylene carbonate (Et₄NBF₄/PC) solvent, and it exhibits 105.9 F g^?1 even after 9500 cycles. More importantly, the phosphorene‐based capacitors possess excellent anti‐self‐discharge performance. The capacitors retain 76.16% of capacitance after resting for 300 h. The practical application of the zinc ion capacitor is demonstrated through a flexible paper‐based printed microcapacitor. It is believed that the developed zinc ion capacitor can effectively resolve the severe self‐discharge problem of supercapacitors. Moreover, high‐voltage zinc ion capacitors provide more opportunities for the application of supercapacitors.     

Affinity Laminated Chromatography Membrane Built‐in Electrodes for Suppressing Polysulfide Shuttling in Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are promising candidates for energy storage, but suffer from capacity and cycling challenges caused by the serious shuttling effect of polysulfide (PS) ions. To address these issues, a sodium alginate (SA)‐derived affinity laminated chromatography membrane built‐in electrode is designed. This is the first attempt to utilize this type of membrane, which is widely used for the selective adsorption of proteins, in the battery field. An ordered multilayer structure throughout the electrode can easily be obtained, and the number of membrane layers can be also conveniently controlled by varying the cross‐linking time of SA. The PS shuttling effect is efficiently suppressed and the permeability of PSs is reduced by enveloping the carbon/sulfur powder in ultrathin laminated chromatography membranes. As a result, these designed electrodes deliver a superhigh initial capacity of 1492 mA h g^?1, with a capacity retention almost 20% higher than the contrast. This low‐cost and easily mass‐producible strategy inspired by affinity chromatography is expected to effectively solve the PS shuttling problem toward high‐loading and long‐lifetime Li–S batteries in practice.     

Conductive Hole‐Selective Passivating Contacts for Crystalline Silicon Solar Cells

Defect state passivation and conductivity of materials are always in opposition; thus, it is unlikely for one material to possess both excellent carrier transport and defect state passivation simultaneously. As a result, the use of partial passivation and local contact strategies are required for silicon solar cells, which leads to fabrication processes with technical complexities. Thus, one material that possesses both a good passivation and conductivity is highly desirable in silicon photovoltaic (PV) cells. In this work, a passivation‐conductivity phase‐like diagram is presented and a conductive‐passivating‐carrier‐selective contact is achieved using PEDOT:Nafion composite thin films. A power conversion efficiency of 18.8% is reported for an industrial multicrystalline silicon solar cell with a back PEDOT:Nafion contact, demonstrating a solution‐processed organic passivating contact concept. This concept has the potential advantages of omitting the use of conventional dielectric passivation materials deposited by costly high‐vacuum equipment, energy‐intensive high‐temperature processes, and complex laser opening steps. This work also contributes an effective back‐surface field scheme and a new hole‐selective contact for p‐type and n‐type silicon solar cells, respectively, both for research purposes and as a low‐cost surface engineering strategy for future Si‐based PV technologies.     

Optimized Catalytic WS2–WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium–Sulfur Batteries

The lithium–sulfur (Li–S) battery is a next generation high energy density battery, but its practical application is hindered by the poor cycling stability derived from the severe shuttling of lithium polysulfides (LiPSs). Catalysis is a promising way to solve this problem, but the rational design of relevant catalysts is still hard to achieve. This paper reports the WS₂–WO₃ heterostructures prepared by in situ sulfurization of WO₃, and by controlling the sulfurization degree, the structure is controlled, which balances the trapping ability (by WO₃) and catalytic activity (by WS₂) toward LiPSs. As a result, the WS₂–WO₃ heterostructures effectively accelerate LiPS conversion and improve sulfur utilization. The Li–S battery with 5 wt% WS₂–WO₃ heterostructures as additives in the cathode shows an excellent rate performance and good cycling stability, revealing a 0.06% capacity decay each cycle over 500 cycles at 0.5 C. By building an interlayer with such heterostructure‐added graphenes, the battery with a high sulfur loading of 5 mg cm^?2 still shows a high capacity retention of 86.1% after 300 cycles at 0.5 C. This work provides a rational way to prepare the metal oxide–sulfide heterostructures with an optimized structure to enhance the performance of Li–S batteries.     

miR-125b-5p促进分枝杆菌在宿主细胞和小鼠体内存活的研究

通过观察miR-125b-5p对分枝杆菌在宿主细胞和小鼠体内存活情况的影响,探究其在抗结核免疫过程中的作用。采用不同培养基对分枝杆菌进行培养并计数;以1640培养基加10%胎牛血清培养所有实验用细胞。将终浓度50 nmol/L的miR-125b-5p 模拟物、miR-125b-5p 抑制剂及磷酸盐缓冲液(PBS)对照加入细胞后,在不同时间点收集细胞。用分枝杆菌分别感染宿主细胞(A549、THP-1和RAW264.7)以及C57BL/6小鼠。采用定量聚合酶链反应检测miR-125b-5p的表达量。结果miR-125b-5p在分枝杆菌感染的多种宿主细胞及小鼠中都显著上调表达,其中小鼠肺部的表达量提高了约15倍。分别转染模拟物和抑制剂后,再用分枝杆菌感染细胞,结果发现miR-125b-5p可促进分枝杆菌在宿主细胞内的生长。当miR-125b-5p抑制剂注射到卡介苗(BCG)感染的小鼠体内时,小鼠体内的细菌载量显著降低(P<0.05)。本研究证明miR-125b-5p可调控分枝杆菌在宿主细胞及小鼠体内的生长,在抗结核免疫过程中发挥了重要作用。进一步对其作用机制的深入研究将为临床结核病的治疗提供理论指导。     

小儿肺热咳喘口服液联合三联吸入雾化治疗法对哮喘急性发作的影响

目的:探讨小儿肺热咳喘口服液联合三联吸入雾化治疗方案对哮喘患儿的治疗效果以及对肺功能的影响作用。方法:将我院自2017年1月至2018年11月间收治的哮喘患儿210例作为研究对象,按照随机数字表法分为两组各105例,研究组患儿在布地奈德、沙丁胺醇、异丙托溴铵三联吸入雾化治疗的基础上给予小儿肺热咳喘口服液进行治疗,对照组患儿仅给予三联雾化吸入治疗,对比观察两组患儿的疗效和预后。结果:研究组临床治疗后总有效率为95.24%,明显高于对照组77.14%(P0.05);治疗后研究组咳嗽消失时间、呼吸困难消失时间和急性发作随诊时间均明显短于对照组(P0.05),两组肺部喘鸣音消失时间比较差异无统计学意义(P0.05);治疗前患儿第一秒用力呼气量(forced expiratory volume in one second,FEV1)、最大肺活量(forced vital capacity,FVC)及FEV1/FVC值、呼气峰流速值(peak expiratory flowrate,PEF)对比无统计学意义(P0.05),治疗后1 d、3 d、7 d以上指标水平均明显升高,且在治疗后7 d,研究组明显高于对照组(P0.05)。治疗期间研究组有1例出现轻度腹泻,3例食欲减退,并发症的发生率为3.81%(4/105),对照组治疗期间2例出现轻度腹泻,4例食欲减退,并发症的发生率为5.71%(6/105),两组比较无统计学意义(P0.05)。结论:使用小儿肺热咳喘口服液联合三联吸入雾化法治疗儿童哮喘急性发作,可改善患儿临床症状和肺功能,疗效显著,可推广使用。     

白藜芦醇通过下调MEK/ERK/c-Jun信号通路抑制H2O2诱导的肺癌细胞增殖

目的:探讨白藜芦醇(Res)是否通过下调ERK激酶/胞外信号调节激酶/原癌基因(MEK/ERK/c-Jun)信号通路抑制小剂量过氧化氢(H2O2)诱导肺癌细胞增殖。方法:采用MTS实验检测小剂量20μM H2O2以及分别加入MEK阻断剂U0126和Res后H2O2对肺癌细胞NCI-H1395增殖的影响,采用Western Blot检测H2O2对ERK1/2和Akt蛋白磷酸化水平以及加入Res后H2O2对MEK、ERK1/2和c-Jun蛋白磷酸化水平的影响。结果:小剂量H2O2对肺癌细胞NCI-H1395具有促增殖作用,H2O2通过活化ERK1/2和Akt蛋白的磷酸化水平促进肺癌细胞NCI-H1395增殖,加入MEK阻断剂U0126后H2O2对肺癌细胞NCI-H1395增殖作用降低(P<0.05)。Res可抑制H2O2诱导的肺癌细胞NCI-H1395增殖,加入Res后,H2O2引起的MEK、ERK1/2和c-Jun蛋白磷酸化水平均降低(P<0.05)。结论:小剂量H2O2对肺癌细胞NCI-H1395具有促增殖作用,Res通过抑制MEK/ERK/c-Jun信号通路来抑制H2O2对肺癌细胞NCI-H1395的促增殖作用,其具体机制还需进一步研究。