Kinetic properties of a L-cysteine desulfhydrase-deficient mutant in the enzymatic formation of L-cysteine from D,L-ATC

Summary A mutant strain lacking in activity of L-cysteine desulfhydrase, a L-cysteine-decomposing enzyme, was screened after UV-treatment ofPseudomonas sp. CU6. The properties of the two strains, original and mutant, were compared on the basis of parameter values estimated from kinetic simulations of the enzymatic formation of L-cysteine from D,L-ATC. Both strains suffered from product inhibition, though inhibition was less for the mutant strain.     

Purification and some properties of a phospholipase A2 from bovine platelets

An intracellular form of phospholipase A2 was purified about 47,500-fold to near homogeneity from bovine platelets 100,000 x g supernatant by sequential use of column chromatographies on Heparin-Sepharose, DEAE-Sephacel, Butyl-Toyopearl, Sephacryl S-300, DEAE-5PW HPLC, TSK G 3000 SW HPLC and Mono Q FPLC. The final preparation showed a single band on SDS-polyacrylamide gel, and its molecular mass was estimated to be approximately 100,000 daltons. The purified PLA2 showed maximal activity at alkaline pH(pH 9.0-10.0) and considerable activity at 0.3-1.0 microM calcium concentration. It hydrolyzed phosphatidylcholine containing arachidonate at sn-2 position with high selectivity in comparison to linoleate.     

Work flow control in the flexible flow line

This research involves the development and evaluation of a part flow control model for a type of flexible manufacturing system (FMS) called a dedicated flexible flow line (FFL). In the FFL, all part types flow along the same path between successive machine groups. The specific objective of the part flow control model for the FFL is to minimize makespan for a given set of parts produced in a FFL near-term schedule, given fixed available buffer constraints. The control model developed in this research involved the repeated, real-time execution of a mathematical programming algorithm. The algorithm attempts to release the right mix of parts at the tight time to keep the FFL operating smoothly. The focus of the approach is directed toward managing WIP buffers for each machine group queue. The algorithm specifically incorporates stochastic disturbance factors such as machine failures. Through a limited number of simulation experiments, performance of the control model is shown to be superior to other parts releasing and control methods reported in the literature.     

Studies on quantitative physiology of Trichoderma reesei with two-stage continuous culture for cellulose production

By employing a two-stage continuous-culture system, some of the more important physiological parameters involved in cellulose biosynthesis have been evaluated with an ultimate objective of designing an optimally controlled cellulose process. The two-stage continuous-culture system was run for a period of 1350 hr with Trichoderma reesei strain MCG-77. The temperature and pH were controlled at 32°C and pH 4.5 for the first stage (growth) and 28°C and pH 3.5 for the second stage (enzyme production). Lactose was the only carbon source for the both stages. The ratio of specific uptake rate of carbon to that of nitrogen, Q(C)/Q(N), that supported good cell growth ranged from 11 to 15, and the ratio for maximum specific enzyme productivity ranged from 5 to 13. The maintenance coefficients determined for oxygen, M_O, and for carbon source, M_C, are 0.85 mmol O₂/g biomass/hr and 0.14 mmol hexose/g biomass/hr, respectively. The yield constants determined are: Y_X/O = 32.3 g biomass/mol O₂, Y_X/C = 1.1 g biomass/g C or Y_X/C = 0.44 g biomass/g hexose, Y_X/N = 12.5 g biomass/g nitrogen for the cell growth stage, and Y_X/N = 16.6 g biomass/g nitrogen for the enzyme production stage. Enzyme was produced only in the second stage. Volumetric and specific enzyme productivities obtained were 90 IU/liter/hr and 8 IU/g biomass/hr, respectively. The maximum specific enzyme productivity observed was 14.8 IU/g biomass/hr. The optimal dilution rate in the second stage that corresponded to the maximum enzyme productivity was 0.026 ～ 0.028 hr^?1, and the specific growth rate in the second stage that supported maximum specific enzyme productivity was equal to or slightly less than zero.     

Species specificity and intraspecific variation in the chemical profiles of Heliconius butterflies across a large geographic range

In many animals, mate choice is important for the maintenance of reproductive isolation between species. Traits important for mate choice and behavioral isolation are predicted to be under strong stabilizing selection within species; however, such traits can also exhibit variation at the population level driven by neutral and adaptive evolutionary processes. Here, we describe patterns of divergence among androconial and genital chemical profiles at inter‐ and intraspecific levels in mimetic Heliconius butterflies. Most variation in chemical bouquets was found between species, but there were also quantitative differences at the population level. We found a strong correlation between interspecific chemical and genetic divergence, but this correlation varied in intraspecific comparisons. We identified “indicator” compounds characteristic of particular species that included compounds already known to elicit a behavioral response, suggesting an approach for identification of candidate compounds for future behavioral studies in novel systems. Overall, the strong signal of species identity suggests a role for these compounds in species recognition, but with additional potentially neutral variation at the population level.     

Improving the phenotype predictions of a yeast genome‐scale metabolic model by incorporating enzymatic constraints

Genome‐scale metabolic models (GEMs) are widely used to calculate metabolic phenotypes. They rely on defining a set of constraints, the most common of which is that the production of metabolites and/or growth are limited by the carbon source uptake rate. However, enzyme abundances and kinetics, which act as limitations on metabolic fluxes, are not taken into account. Here, we present GECKO, a method that enhances a GEM to account for enzymes as part of reactions, thereby ensuring that each metabolic flux does not exceed its maximum capacity, equal to the product of the enzyme's abundance and turnover number. We applied GECKO to a Saccharomyces cerevisiae GEM and demonstrated that the new model could correctly describe phenotypes that the previous model could not, particularly under high enzymatic pressure conditions, such as yeast growing on different carbon sources in excess, coping with stress, or overexpressing a specific pathway. GECKO also allows to directly integrate quantitative proteomics data; by doing so, we significantly reduced flux variability of the model, in over 60% of metabolic reactions. Additionally, the model gives insight into the distribution of enzyme usage between and within metabolic pathways. The developed method and model are expected to increase the use of model‐based design in metabolic engineering.     

Invasive cane toads are unique in shape but overlap in ecological niche compared to Australian native frogs

Invasive species are an important issue worldwide but predicting invasiveness, and the underlying mechanisms that cause it, is difficult. There are several primary hypotheses to explain invasion success. Two main hypothesis based on niche spaces stand out as alternative, although not exclusive. The empty niche hypothesis states that invaders occupy a vacant niche space in the recipient community, and the niche competition hypothesis states that invaders overlap with native species in niche space. Studies on trait similarity/dissimilarity between the invader and native species can provide information on their niche overlap. Here, we use the highly invasive and well‐studied cane toad (Rhinella marina) to test these two hypotheses in Australia, and assess its degree of overlap with native species in several niche dimensions. We compare extensive morphological and environmental data of this successful invader to 235 species (97%) of native Australian frogs. Our study is the first to document the significant morphological differences between the invasive cane toad and a continent‐wide frog radiation: despite significant environmental overlap, cane toads were distinct in body size and shape from most Australian frog species, suggesting that in addition to their previously documented phenotypic plasticity and wide environmental and trophic niche breadth, their unique shape also may have contributed to their success as an invasive species in Australia. Thus, the invasive success of cane toads in Australia may be explained through them successfully colonizing an empty niche among Australian anurans. Our results support that the cane toad's distinct morphology may have played a unique role in the invasiveness of this species in Australia, which coupled with a broad environmental niche breadth, would have boosted their ability to expand their distribution across Australia. We also propose RLLR (Relative limb length ratio) as a potentially useful measure of identifying morphological niche uniqueness and a potential measure of invasiveness potential in anuran amphibians.     

Different seasonal feeding activity of diverse herbivores in two temperate forests

The aim of the present study was to understand the effects of abiotic conditions on seasonal feeding activity of diverse herbivores on the same oak tree species in two different forests. We tracked changes in herbivore feeding activities on an oak tree species (Quercus serrata) in two localities: a low elevation small hillock forest patch (Muan, MN) and a middle elevation mountain forest patch (Mt. Jirisan, JR). A total of five sites were selected in each of two forest localities. Data for leaf expansion, leaf chemical qualities, leaf damage ratio, and numbers of lepidopteran caterpillars were collected during spring (May) and summer (July to August), 2012. Leaf expansion rate was higher at the low hillock forest than the mid‐mountain forest from spring to summer. Nitrogen and carbon content decreased seasonally at both localities. Lepidopteran larval diversity was high in the mid‐mountain forest, and two‐way ANOVA showed that species richness of lepidopteran larvae was significantly affected by the interaction between season and locality. Leaf damage by all herbivores was higher in the low hillock forest than the mid‐mountain forest in spring, but was higher in the mid‐mountain forest in summer. Relative proportion of general herbivores increased from spring to summer in the mid‐mountain forest, but not in the low hillock forest. Canonical Correspondence Analysis (CCA) ordination showed that altitude‐ and season‐related variables were significant species and environment interaction factors. Our data indicate that locality and temperature disproportionally affected the feeding activities of diverse herbivores in two different temperate forests.