Scale down of recombinant protein production: a comparative study of scaling performance

A large bioreactor is heterogeneous with respect to concentration gradients of substrates fed to the reactor such as oxygen and growth limiting carbon source. Gradient formation will highly depend on the fluid dynamics and mass transfer capacity of the reactor, especially in the area in which the substrate is added. In this study, some production-scale (12 m³ bioreactor) conditions of a recombinant Escherichia coli process were imitated on a laboratory scale. From the large-scale cultivations, it was shown that locally high concentration of the limiting substrate fed to the process, in this case glucose, existed at the level of the feedpoint. The large-scale process was scaled down from: (i) mixing time experiments performed in the large-scale bioreactor in order to identify and describe the oscillating environment and (ii) identification of two distinct glucose concentration zones in the reactor. An important parameter obtained from mixing time experiments was the residence time in the feed zone of about 10 seconds. The size of the feed zone was estimated to 10%. Based on these observations the scale-down reactor with two compartments was designed. It was composed of one stirred tank reactor and an aerated plug flow reactor, in which the effect of oscillating glucose concentration on biomass yield and acetate formation was studied. Results from these experiments indicated that the lower biomass yield and higher acetate formation obtained on a large scale compared to homogeneous small-scale cultivations were not directly caused by the cell response to the glucose oscillation. This was concluded since no acetate was accumulated during scale-down experiments. An explanation for the differences in results between the two reactor scales may be a secondary effect of high glucose concentration resulting in an increased glucose metabolism causing an oxygen consumption rate locally exceeding the transfer rate. The results from pulse response experiments and glucose concentration measurements, at different locations in the reactor, showed a great consistency for the two feeding/pulse positions used in the large-scale bioreactor. Furthermore, measured periodicity from mixing data agrees well with expected circulation times for each impeller volume. Conclusions are drawn concerning the design of the scale-down reactor.     

A review of malaria vaccine clinical projects based on the WHO rainbow table

Development and Phase 3 testing of the most advanced malaria vaccine, RTS,S/AS01, indicates that malaria vaccine R&D is moving into a new phase. Field trials of several research malaria vaccines have also confirmed that it is possible to impact the host-parasite relationship through vaccine-induced immune responses to multiple antigenic targets using different platforms. Other approaches have been appropriately tested but turned out to be disappointing after clinical evaluation. As the malaria community considers the potential role of a first-generation malaria vaccine in malaria control efforts, it is an apposite time to carefully document terminated and ongoing malaria vaccine research projects so that lessons learned can be applied to increase the chances of success for second-generation malaria vaccines over the next 10 years. The most comprehensive resource of malaria vaccine projects is a spreadsheet compiled by WHO thanks to the input from funding agencies, sponsors and investigators worldwide. This spreadsheet, available from WHO's website, is known as "the rainbow table". By summarizing the published and some unpublished information available for each project on the rainbow table, the most comprehensive review of malaria vaccine projects to be published in the last several years is provided below.     

An evaluation of fMLP pocket dimensions and features using formyltetrapeptides.

The formyltetrapeptides for-Met-Leu-Leu-Phe-OMe 1, for-Met-Leu-Aib-Phe-OMe 2, for-Met-Leu-Ac6c-Phe-OMe 3, for-Met-Leu-Pro-Phe-OMe 4, for-Met-Pro-Pro-Phe-OMe 5, for-Met-Aib-Aib-Phe-OMe 6, for-Met-Pro-Aib-Phe-OMe 7 and for-Met-Aib-Pro-Phe-OMe 8 were synthesized and biologically tested on human neutrophils in an attempt to evaluate the specific receptor pocket dimensions and features. Our results indicate that the shift in the Phe residue to the fourth position in these compounds strongly reduces chemotactic response, but is efficacious in triggering superoxide anion production and lysozyme release (order of potency 3 > 2 > 1 > 4 > 6 > 8 > 5 > 7). The potency of the two latter responses correlates well with the affinity data obtained in binding experiments.     

Simian virus 40 agnoprotein facilitates perinuclear-nuclear localization of VP1, the major capsid protein.

The agnoprotein of simian virus 40 (SV40) is a 61-amino-acid protein encoded in the leader of some late mRNAs. In indirect immunofluorescence studies with antisera against SV40 capsid proteins, we show that mutants which make no agnoprotein display abnormal perinuclear-nuclear localization of VP1, the major capsid protein, but not VP2 or VP3, the minor capsid proteins. In wild-type (WT) SV40-infected CV-1P cells, VP1 was found predominantly in the cytoplasm until 36 h postinfection (p.i.), approximately the time that high levels of agnoprotein became detectable under our infection conditions. Thereafter, VP1 localized rapidly to the perinuclear region and to the nucleus. In contrast, in agnoprotein-minus mutant-infected CV-1P cells, perinuclear-nuclear accumulation of VP1 occurred much less efficiently; a significantly greater fraction of cells with predominantly cytoplasmic fluorescence was observed up to 48 h p.i. At 48 and 60 h p.i., more cells with largely perinuclear and little nuclear staining were seen than in WT-infected controls. In similar analyses with stably transfected cell lines constitutively expressing the agnoprotein, VP1 localized to the nucleus before 30 h p.i., regardless of the infecting virus. Delayed nuclear entry of VP1 in a mutant which makes no agnoprotein was also overcome in a revertant which has a second site point mutation in VP1. This suggests that an alteration of VP1 can partially overcome the defect of the agnogene mutation by enhancement of the rate of its own nuclear localization. Taken together, these results indicate that at least one function of the agnoprotein is to enhance the efficiency of perinuclear-nuclear localization of VP1.     

Distinction between mouse DNA polymerases alpha and beta by tryptic peptide mapping.

Results presented here and in a previous paper (Tanabe et al. (1979) Biochemistry 18, 3401--3406) indicate that mouse beta-polymerase is a single polypeptide with an apparent molecular weight of 40,000. This polypeptide has now been analyzed by tryptic peptide mapping. Comparison of the results with identical analysis of mouse alpha-polymerase reveals that the tryptic peptides derived from the two enzymes are different. These results indicate that beta-polymerase is neither a subunit of alpha-polymerase nor a proteolytic degradation product of alpha-polymerase.     

Effects of preparation and fixation on three quantitative fluorescent cytochemical procedures

A series of experiments was undertaken in which cells dissociated from the abdominal lymph nodes of mice were lightly centrifuged into slides and fixed either wet or after drying in 70% ethanol, 1% glutaraldehyde, 1% formaldehyde, or neutral formalin. Three fluorescent cytochemical methods were evaluated: staining of DNA with mithramycin; fluorochroming of basic groups of proteins with brilliant sulfaflavine (BSF); and staining of sulfhydryl and disulfide groups with N-(7-dimethylamino-4-methylcoumarinyl)maleimide (DACM). In the case of mithramycin, the best results were obtained after fixation in 70% ethanol without drying. Staining of dried preparations fixed in 1% glutaraldehyde also yielded reasonably consistent results, although the fluorescence was lower, and the variability higher, than in the group fixed without drying in 70% ethanol. The use of fixatives containing formaldehyde resulted in fluorescence values of only about one-third those of the other two groups, and the variability of the data was higher. In material stained with BSF, satisfactory results were obtained in preparations fixed without drying in neutral formalin containing mersalyl acid. Other fixatives could be used, but the resulting coefficients of variation were higher than those of formalin-fixed material. Sulfhydryl to disulfide ratios approaching those expected from biochemical evidence were obtained in DACM-stained material only after fixation without drying in neutral formalin containing mersalyl acid. Inverted sulfhydryl-disulfide ratios were observed in material fixed without drying in 70% ethanol; and in dried material fixed in 1% formaldehyde, neutral formalin, or 1% glutaraldehyde.     

Influence of antibiotics and trace salts on lysine production by arthrobacter globiformis

A hydrocarbon utilizing strain of Arthrobacter globiformis Lb isolated from local soil has been found to yield lysine 3.4 g l^?1, keeping the medium optimal for pH, C- and N-sources. Addition of antibiotics and micronutrients to that optimal media stimulated cell growth and enhanced lysine yield.