Polymeric nanoparticles with encapsulated superparamagnetic iron oxide and conjugated Cisplatin for potential bladder cancer therapy

Amphiphilic poly(ε-caprolactone)-b-poly(propargyl methacrylate-click-mercaptosuccinic acid-co-poly(ethylene glycol) methyl ether methacrylate) (PCL-b-P(PMA-click-MSA-co-PEGMA)) were synthesized by a combination of ring-opening polymerization, reversible addition-fragmentation chain transfer (RAFT) polymerization, and thiol-yne "click" reaction. The hydrophobic PCL core can be used to load superparamagnetic iron oxide nanoparticles (SPIONs), while the pendant dicarboxylic groups in the hydrophilic shell are used to coordinate cisplatin. These SPIONs-loaded, cisplatin-conjugated polymeric nanoparticles (Pt-Fe-PNs) are superparamagnetic at room temperature and are mucoadhesive. Release of cisplatin from Pt-Fe-PNs in artificial urine at 37 °C was characterized by an initial burst release with a release of ～30% of the cisplatin in the first 4 h followed by a slow sustained release over 4 days. The cisplatin release can be further enhanced by increasing the temperature. These Pt-Fe-PNs can effectively induce cytotoxicity against UMUC3 bladder cancer cells with IC(50) of 32.3 μM. These results indicate that Pt-Fe-PNs is potentially a promising cisplatin delivery vehicle which can be combined with SPIONs-induced hyperthermia for bladder cancer therapy.     

Pharmacological and Host Considerations Surrounding Dose Selection and Duration of Therapy with Echinocandins

Caspofungin, micafungin and anidulafungin are antifungal drugs with excellent safety profiles. Dosing regimens and treatment durations must be appropriate for optimal patient outcomes. Overall, factors that affect dosing of all three drugs are similar. Drug-specific properties, including in vitro concentration-dependent antifungal activity, activity against fungal biofilms, and pharmacokinetic and pharmacodynamic parameters influence dose selection and duration of therapy. Dosing strategies that provide “unbound” plasma drug concentrations exceeding the minimum inhibitory concentration (or minimum effective concentration) of the fungus are essential. Patient weight, age and illness severity are also important considerations for adequate exposure to drug: individuals >66 kg, pediatric patients and the critically-ill clear drug at higher rates although drug product information guidelines do not recommend for these populations to receive doses higher than those currently used. Clinical studies of treatment of, and prophylaxis against, Candida and Aspergillus infection indicate that currently recommended dosing regimens are adequate in most instances.     

Spatially well-defined binary brushes of poly(ethylene glycol)s for micropatterning of active proteins on anti-fouling surfaces

We report a novel method for micropatterning of active proteins on anti-fouling surfaces via spatially well-defined and dense binary poly(ethylene glycol)s (PEGs) brushes with controllable protein-docking sites. Binary brushes of poly(poly(ethylene glycol) methacrylate-co-poly(ethylene glycol)methyl ether methacrylate), or P(PEGMA-co-PEGMEMA), and poly(poly(ethylene glycol)methyl ether methacrylate), or P(PEGMEMA), were prepared via consecutive surface-initiated atom transfer radical polymerizations (SI-ATRPs) from a resist-micropatterned Si(100) wafer surface. The terminal hydroxyl groups on the side chains of PEGMA units in the P(PEGMA-co-PEGMEMA) microdomains were activated directly by 1,1'-carbonyldiimidazole (CDI) for the covalent coupling of human immunoglobulin (IgG) (as a model active protein). The resulting IgG-coupled PEG microdomains interact only and specifically with target anti-IgG, while the other PEG microregions effectively prevent specific and non-specific protein fouling. When extended to other active biomolecules, microarrays for specific and non-specific analyte interactions with a high signal-to-noise ratio could be readily tailored.     

Effect of different dextrose equivalents of maltodextrin on oxidation stability in encapsulated fish oil by spray drying

Encapsulating fish oil by spray drying with an adequate wall material was investigated to determine if stable powders containing emulsified fish-oil-droplets can be formed. In particular, the dextrose equivalent (DE) of maltodextrin (MD) affects the powder structure, surface-oil ratio, and oxidative stability of fish oil. The carrier solution was prepared using MD with different DEs (DE = 11, 19, and 25) and sodium caseinate as the wall material and the emulsifier, respectively. The percentage of microcapsules having a vacuole was 73, 39, and 38% for MD with DE = 11, 19, and 25, respectively. Peroxide values (PVs) were measured for the microcapsules incubated at 60 °C. The microcapsules prepared with MD of DE = 25 and 19 had lower PVs than those prepared with MD of DE = 11. The difference in PV can be ascribed to the difference in the surface-oil ratio of the spray-dried microcapsules.     

Molecular weight analysis of soluble antigens from Toxoplasma gondii

Ultrasonicated Toxoplasma gondii (RH strain) tachyzoites were fractionated into a water-soluble and a deoxycholate-soluble fraction. Polyclonal immune mouse serum was prepared by challenging chronically-infected mice with viable RH strain tachyzoites. The parasite fractions were labelled with 125I, and the radio-labelled antigens were precipitated by the immune mouse serum or a monoclonal anti-Toxoplasma antibody (FMC 20), that reacts only in the indirect hemagglutination antibody test. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and autoradiography of the immunoprecipitates showed that the water-soluble fraction contained 10 antigenic polypeptides, and the deoxycholate-soluble fraction contained seven antigenic peptides. The FMC 20 reacted against a 98,000-dalton antigen that was present in the water-soluble fraction only.     

Covalent immobilization of glucose oxidase on well-defined poly(glycidyl methacrylate)-Si(111) hybrids from surface-initiated atom-transfer radical polymerization

A simple one-step procedure was employed for the covalent immobilization of an atom-transfer radical polymerization (ATRP) initiator, via the robust Si-C bond, on the hydrogen-terminated Si(111) surface (Si-H surface). Well-defined poly(glycidyl methacrylate) [P(GMA)] brushes, tethered directly on the (111)-oriented single-crystal silicon surface, were prepared via surface-initiated ATRP. Kinetics study on the surface-initiated ATRP of glycidyl methacrylate revealed that the chain growth from the silicon surface was consistent with a "controlled" process. A relatively high concentration of glucose oxidase (GOD; above 0.2 mg/cm2) could be coupled directly to the well-defined P(GMA) brushes via the ring-opening reaction of the epoxide groups with the amine moieties of the enzyme. The resultant GOD-functionalized P(GMA) brushes, with the accompanying hydroxyl groups from the ring-opening reaction of the epoxide groups, serves as an effective spacer to provide the GOD with a higher degree of conformational freedom and a more hydrophilic environment. An equivalent enzyme activity above 1.6 units/cm2 [micromoles of beta-D-(+)-glucose oxidized to d-gluconolactone per minute per square centimeter] and a corresponding relative activity of about 60% could be readily achieved. The immobilized GOD also exhibited an improved stability during storage over that of the free enzyme. The GOD-functionalized silicon substrates are potentially useful to the development of silicon-based glucose biosensors.     

Monoclonal antibody purification: choice of method and assessment of purity and yield

In this article we discuss our choices of monoclonal antibody separation methods for the applications which face us most frequently. We explain the rationale behind these choices, to help other users make their own choices. The review is intended to be brief and selective; references to detailed reviews are provided.     

Antimicrobial surfaces of viologen-quaternized poly((2-dimethyl amino)ethyl methacrylate)-Si(100) hybrids from surface-initiated atom transfer radical polymerization

To improve the antimicrobial ability of silicon-based bioelectronics and to tailor the silicon surfaces for inhibiting biofilm formation, well-defined functional polymer-Si(100) hybrids, consisting of nearly monodispersed poly((2-dimethylamino)ethyl methacrylate) (P(DMAEMA)) covalently tethered on the silicon surface and functionalized by viologen moieties, were prepared. P(DMAEMA)-Si hybrids were prepared via surface-initiated atom transfer radical polymerization (ATRP) of (2-dimethylamino)ethyl methacrylate (DMAEMA) on the hydrogen-terminated Si(100) surfaces (Si−H surfaces). The tertiary amino groups of the covalently immobilized (Si−C bonded) P(DMAEMA) brushes on the silicon substrates were quaternized by an alkyl halide to produce a high concentration of quaternary ammonium groups with biocidal functionality. Alternatively, covalent coupling of viologen moieties to the tertiary amino groups of P(DMAEMA) brushes produced the quaternized P(DMAEMA)-Si(100) hybrids with substantially enhanced antimicrobial capability, as well as capability to effectively inhibit biofilm formation. Thus, the viologen-quaternized P(DMAEMA)-Si(100) hybrids possess good antibacterial surface properties and are potentially useful to the silicon-based bioelectronics to ensure their efficiency, durability and reliability.     

Affinity analysis of DNA aptamer-peptide interactions using gold nanoparticles

Gold nanoparticles (AuNPs) were used as colorimetric probe and fluorescence quencher for affinity analysis of DNA aptamers toward their target mucin 1 (MUC1) peptide. Single-stranded DNA (ssDNA) aptamer-coated AuNPs showed increased stability (i.e., more resistant to aggregation induced by NaCl) in the presence of their target peptide due to the increase in steric protection conferred by the ssDNA-peptide complexes formed on the AuNPs. Based on changes in the UV-vis extinction spectrum of AuNPs (a measure of AuNPs aggregation) and fluorescence restoration of CY5-ssDNA upon ssDNA-peptide complex formation, the formation of the complexes and ssDNA sequence-dependent dissociation constant (K(d)) were determined. Besides the UV-vis and fluorescence measurements, the hydrodynamic diameters, zeta potential measurements, and transmission electron microscopy (TEM) images of AuNPs after various coatings supported the assay principle. The methodology presented herein provides a rapid and sensitive alternative solution for the identification of high affinity binders from systematic evolution of ligands by exponential enrichment (SELEX).     

Does lack of intraspecific aggression or absence of nymphs determine acceptance of foreign reproductives in <Emphasis Type="Italic">Macrotermes</Emphasis>?

The rejection or acceptance of a foreign reproductive by an alien colony may not always be as straightforward as cue recognition between worker termites. This paper aims to determine whether adoption of foreign reproductives is caused simply by lack of intraspecific aggression or is contingent on the reproductive status of the host colony. In the fungus-culturing termites, Macrotermes gilvus (Hagen) and Macrotermes carbonarius (Hagen), major workers showed low intraspecific aggression towards non-nestmates irrespective of geographic distance between source colonies. Our results indicated that workers were hardly aggressive towards non-nestmates. In royal cell-swapping experiments, both species responded in a similar way: (1) in host colonies with nymphs present, the foreign reproductives were rejected; while (2) in host colonies without nymphs the foreign reproductives were either accepted and breeding resumed or the host colonies died eventually. Workers from the host colonies preferentially maintained offspring nymphs from which adultoid replacement reproductives develop rather than accepting foreign reproductives. There is no fitness gain for the queenless workers in accepting foreign reproductives; however, there is overall benefit to the newly born population.