A practical approach to routine immunostaining of paraffin sections in the microwave oven

Summary The Streptavidin-Biotin Complex (SABC) Immunostaining method can be carried out by performing the rinsing and blocking steps and in addition the incubations with the primary and the secondary antibody sera in the microwave oven. Irradiation of the Streptavidin-Biotin Complex reduces stain activity due to destruction of horseradish peroxidase (HRP) (Boon & Kok, 1988). Therefore, we decided not to perform this step in the microwave oven. The microwave incubations can be performed using antisera dilutions of 1:1000 (instead of 1:50) in tissue fixed with Kryofix, allowing staining in staining racks. This keeps hands-on time low and simplifies the microwave steps. It is very difficult to obtain reproducible results in the microwave oven using droplet incubations due to problems with hot spots and antenna effects. These problems are avoided when cuvettes are used and air is blown through the solutions during microwave incubations. With effective temperature control the method is highly reproducible, and takes at least 100 min less than the conventional SABC method. It is, in particular, attractive when large series of slides must be routinely immunostained and when reproducible results are desired.     

Affinity enhancement of bispecific antibody against two different epitopes in the same antigen.

For the enhancement of antibody binding affinity, a bispecific antibody against two different epitopes in human chorionic gonadotropin hormone, one is in alpha-subunit and the other is in beta-subunit, was prepared by chemical recombination using 5,5'-dithiobis(2-nitrobenzoic acid). The epitopes recognized by antibodies were investigated by competitive radioimmunoassay, two-site sandwich radioimmunoassay and additivity assay and a proper epitope pair was chosen for preparation of the bispecific antibody. This bispecific antibody has dual specificity and as much as 17.2-fold higher affinity than that of monoclonal antibody with higher affinity by dual antigen binding radioimmunoassay and Scatchard plot analysis.     

Genetics of glucosephosphate isomerase in Aedes togoi (Diptera: Culicidae)

The genetics of glucosephosphate isomerase (E.C. 5.3.1.9) in two strains (Malaysian and Taiwan) of Aedes togoi is reported. Three electrophoretic phenotypes were present in both sexes. The zymogram patterns were identical in both strains of A. togoi. The phenotypes were governed by a pair of codominant alleles. The allele frequency of the slow-moving band was 0.63 in the Malaysian strain and was 0.86 and 0.82 in F161 and F169 generations, respectively, of the Taiwan strain. The sample studied was in good accord with Hardy-Weinberg expectations.     

Evidence that the intermediate electron acceptor,A2, in Photosystem I is a bound iron-sulfur protein

Absorption changes accompanying the formation of light-induced P-700⁺ were investigated in a highly enriched Photosystem I preparation where an intermediate electron acceptor preceding P-430 could be detected. In an enriched Photosystem I particle, light-induced reversible absorption changes observed at 700 nm in the presence of dithionite resembled those previously seen at 703 nm and 820 nm [9], thus indicating the presence of a backreaction between P-700⁺ and A^?₂. After this same Photosystem I particle was treated to denature the bound iron-sulfur centers, the photochemical changes that could be attributed to P-700 A₂ were completely lost. These results provide evidence that the intermediate electron acceptor, A₂, is a bound iron-sulfur protein. Additional studies in the 400–500 nm region with Photosystem I particles prepared by sonication indicate that the spectrum of A₂ is different from that of P-430.     

EPR studies on the respiratory chain of wild-type Saccharomyces cerevisiae and mutants with a deficiency in succinate dehydrogenase

1. Three nuclear mutants of Saccharomyces cerevisiae deficient in succinate dehydrogenase have been isolated. Two of these mutants are allelic.

2. The amount of covalently bound flavin of submitochondrial particles of the two allelic mutants is about 14% and that of the third mutant about 50% of the amount in wild-type particles. The turnover number of succinate dehydrogenase of particles is decreased in all mutants. The turnover number of fumarate reductase is increased in the two allelic mutants, but decreased in the third mutant.

3. EPR spectra, measured at 82 °K, show that the amplitude of the g = 1.93 signal in particles of the two allelic mutants is less than 10% of that in wild-type particles. It is concluded that iron-sulphur centres other than those of succinate dehydrogenase make only a negligible contribution to the line at g = 1.93 in wild-type particles.

4. EPR measurements below 20 °K show that the amplitude of the signal at g = 2.01 detected in oxidized particles is decreased in particles of the two allelic mutants.

5. A signal with lines at g = 2.027 and g = 1.933 is detected at low temperatures in all particle preparations, even in those from a cytoplasmic petite mutant. It is suggested that this signal is derived from a contaminant and not from the inner membrane.     

Body fluid responses of heat-tolerant and intolerant men to work in a hot wet environment.

Acclimatization to heat before proceeding underground is a requirement for each South African mine laborer. Certain individuals among this large population cannot be acclimatized to heat (33.3 degrees C db, 31.7 degrees C wb) and are classified as heat intolerant. In this study certain body fluid responses to heat and work were compared between a group of 19 heat-tolerant (HT) and of 15 heat-intolerant (HI) subjects. To the factors known to affect heat tolerance such as age, weight, and oxygen consumption must now be added differences in body fluid responses. The HI group of subjects failed to hemodilute to the same degree as the HT group though working at the same relative work loads (30% and 50% VO2 max). As the 4-h work period (33.3 degrees C db, 31.7 degrees C wb) continued, the HI group did not maintain hemodilution in spite of the lower absolute work loads, sweat rates, and water deficits suffered by this group. From analysis of blood constituent changes it was suggested that the reason for the differences noted in body fluid dynamics concerned plasma protein equilibrium across capillary walls as well as the protein population of interstitial spaces.     

168 NMR study of RQC domain of BLM protein

BLM, a member of the RecQ helicase associated with the Bloom’s syndrome human genetic disorder, has been found to bind to noncanonical DNA with high affinity via its RecQ C-terminal domain (RQC). Using multi-dimensional NMR spectroscopy, we have determined the solution structure of BLM RQC, and found that BLM RQC retains the overall winged-helix motif previously observed for other RQC proteins. Comparison between BLM RQC and the RQC domain of its homologue, Werner syndrome protein (WRN RQC), revealed two major structural differences. Firstly, BLM RQC contains an extended 14-residue insertion forming a flexible loop between two first α-helices, only found in BLM RQC and not other RQC proteins. Secondly, in contrast to the third α-helix of WRN RQC, an unstructured loop was observed for this region of BLM RQC.     

Morphometry, densitometry and pattern analysis of plastic-embedded histologic material from urothelial cell carcinoma of the bladder.

An image analysis method of grading histologic sections of bladder carcinoma was tested. The method was new in four respects. First, for fixation of the biopsies a coagulant fixative was used. Second, 2-microns plastic sections were used to ensure the reproducibility of nuclear imaging. Third, a new stereologic approach was used for calculation of the nuclear volume and DNA content. Fourth, for the classification rule the morphometric, densitometric and texture features were used in concert. The IBAS 2000 instrument was used for the measurements. Texture analysis of the chromatin patterns was performed using Markovian texture features. Using discriminant analysis, of 22 parameters, 2 morphometric, 2 densitometric and 3 texture features were selected for the classification rule. With them, 89% of the bladder carcinomas were correctly classified into the three grades. All grade III tumors were classified correctly. Among the features tested, the densitometry of the DNA had the highest F values. All of the grade III tumors and 45% of the grade II tumor group had DNA histograms indicating aneuploidy. This study showed that plastic-embedded material is well suited to morphometry and densitometry and can be used for quantitative grading of bladder carcinoma.     

Cloning,purification and biochemical characterisation of an organic solvent-, detergent-, and thermo-stable amylopullulanase from Thermococcus kodakarensis KOD1

Thermostable amylopullulanases can catalyse the hydrolysis of both α-1,4 and α-1,6 glucosidic bonds and are of considerable interest in the starch saccharification industry. In this study, the gene Apu-Tk encoding an extracellular amylopullulanase was cloned from an extremely thermophilic anaerobic archaeon Thermococcus kodakarensis KOD1. Apu-Tk encodes an 1100-amino acid protein with a 27-residue signal peptide, which has a predicted mass of 125 kDa after signal peptide cleavage. Sequence alignments showed that Apu-Tk contains the five regions conserved in all GH57 family proteins. Full-length Apu-Tk was expressed in Escherichia coli and purified to homogeneity. The purified enzyme displayed both pullulanase and amylase activity. The optimal temperature for Apu-Tk to hydrolyse pullulan and soluble starch was >100 °C. Apu-Tk was also active at a broad range of pH (4–7), with an optimum pH of ~5.0–5.5. Apu-Tk also retained >30% of its original activity and partially folded globular structure in the presence of 8% SDS or 10% β-mercaptoethanol. The high yield, broad pH range, and stability of Apu-Tk implicate it as a potential enzyme for industrial applications.