Evaluation of QTLs for Shoot Fly (<Emphasis Type="Italic">Atherigona soccata</Emphasis>) Resistance Component Traits of Seedling Leaf Blade Glossiness and Trichome Density on Sorghum (<Emphasis Type="Italic">Sorghum bicolor</Emphasis>) Chromosome SBI-10L

Shoot fly is a major insect pest of sorghum damaging early crop growth, establishment and productivity. Host plant resistance is an efficient approach to minimize yield losses due to shoot fly infestation. Seedling leaf blade glossiness and trichome density are morphological traits associated with shoot fly resistance. Our objective was to identify and evaluate QTLs for glossiness and trichome density using- i) 1894 F₂s, ii) a sub-set of 369 F₂-recombinants, and iii) their derived 369 F_2:3 progenies, from a cross involving introgression lines RSG04008-6 (susceptible)?×?J2614-11 (resistant). The QTLs were mapped to a 37–72 centimorgan (cM) or 5–15 Mb interval on the long arm of sorghum chromosome 10 (SBI-10L) with flanking markers Xgap001 and Xtxp141. One QTL each for glossiness (QGls10) and trichome density (QTd10) were mapped in marker interval Xgap001-Xnhsbm1044 and Xisep0630-Xtxp141, confirming their loose linkage, for which phenotypic variation accounted for ranged from 2.29 to 11.37 % and LOD values ranged from 2.03 to 24.13, respectively. Average physical map positions for glossiness and trichome density QTLs on SBI-10 from earlier studies were 4 and 2 Mb, which in the present study were reduced to 2 Mb and 800 kb, respectively. Candidate genes Glossy15 (Sb10g025053) and ethylene zinc finger protein (Sb10g027550) falling in support intervals for glossiness and trichome density QTLs, respectively, are discussed. Also we identified a sub-set of recombinant population that will facilitate further fine mapping of the leaf blade glossiness and trichome density QTLs on SBI-10.     

Habitat distribution modelling and reinforcement of Elaeocarpus serratus L. - A threatened tree species of Assam,India for improvement of its conservation status

Elaeocarpus serratus L., commonly known as ‘rudraksh’ referred in the Ayurveda as a wonderful plant for strengthening body constitutions, has been recognized as a threatened plant of Assam, India. Traditionally, rudraksh beads, its bark and leaves are used to cure various ailments like stress, anxiety, depression, nerve pain, epilepsy, migraine, lack of concentration, asthma, hypertension, arthritis and liver diseases. The population stock of the species has been depleting very fast in its natural habitat due to rapid habitat fragmentation and changing climate altering the structural and functional integrity of the plant. Hence, conservation of E. serratus L. with proper scientific investigation to prevent from extinction in its wild habitat is urgently needed. The present study was emphasized with the specific objectives to study the distribution and population status, predication of suitable sites through ENM, standardization of macropropagation methods and reinforcement/reintroduction into the suitable wild habitat to improve conservation status. In the present investigation E. serratus L. was reported in few locations of Assam and Arunachal Pradesh with population sizes of mean density, frequency of occurrence and abundance in relation to other associated species as 0.333, 13.922 and 2.215 respectively. For improving the conservation status, potential area and habitat for reinforcement was predicted using Maximum Entropy (MaxEnt) distribution modelling algorithm. Subsequently, macropropagation protocol was standardized through seed germination and air-layering; saplings were raised and 1050 saplings were reintroduced to the wild habitats selected on the basis of ecological niche modelling. Survival rate was found significantly high as 68%, suggesting that our approach is effective for changing population status and to conserve the plant.     

Molecular characterization of reciprocal crosses of Aerides vandarum and Vanda stangeana (Orchidaceae) at the protocorm stage

Aerides vandarum and Vanda stangeana are two rare and endangered vandaceous orchids with immense floricultural traits. The intergeneric hybrids were synthesized by performing reciprocal crosses between them. In vitro germination response of the immature hybrid embryos was found to be best on half-strength Murashige and Skoog medium supplemented with 20% (v/v) coconut water/liquid endosperm from tender coconut. Determination of hybridity was made as early as the immature seeds or embryos germinated in vitro, using randomly amplified polymorphic DNA (RAPD) markers. Out of 15 arbitrarily chosen decamer RAPD primers, two were found to be useful in amplification of polymorphic bands specific to the parental species and their presence in the reciprocal crosses. However, a decisive profile that can identify the reciprocal crosses could not be provided by RAPD. Amplification of the trnL-F non-coding regions of chloroplast DNA of the parent species and hybrids aided easy identification of the reciprocal crosses from the fact that maternal inheritance of chloroplast DNA held true for these intergeneric hybrids. Subsequent restriction digestion of the polymerase chain reaction (PCR) amplified trnL-F non-coding regions of chloroplast DNA also consolidated the finding. Such PCR-based molecular markers could be used for early determination of hybridity and easy identification of the reciprocal crosses.     

Immobilization of Candida cylindracea lipase on poly lactic acid,polyvinyl alcohol and chitosan based ternary blend film: Characterization,activity, stability and its application for N-acylation reactions

The ecofriendly ternary blend polymer film was prepared from the chitosan (CH), polylactic acid (PLA) and polyvinyl alcohol (PVA). Immobilization of Candida cylindracea lipase (CCL) was carried out on ternary blend polymer via entrapment methodology. The ternary blend polymer and immobilized biocatalyst were characterized by using N₂ adsorption–desorption isotherm, SEM, FTIR, DSC, and (%) water content analysis through Karl Fischer technique. Biocatalyst was then subjected for the determination of practical immobilization yield, protein loading and specific activity. Immobilized biocatalyst was further applied for the determination of biocatalytic activity for N-acylation reactions. Various reaction parameters were studied such as effect of immobilization support (ratio of PLA:PVA:CH), molar ratio (dibutylamine:vinyl acetate), solvent, biocatalyst loading, time, temperature, and orbital speed rotation. The developed protocol was then applied for the N-acylation reactions to synthesize several industrially important acetamides with excellent yields. Interestingly, immobilized lipase showed fivefold higher catalytic activity and better thermal stability than the crude extract lipase CCL. Furthermore various kinetic and thermodynamic parameters were studied and the biocatalyst was efficiently recycled for four successive reuses. It is noteworthy to mention that immobilized biocatalyst was stable for period of 300 days.     

Noncytotoxic Dy3+-activated glass emits cool white light for near ultraviolet-based white light-emitting diodes,visible lasers,and biomedical applications

Using the melt quenching technique, a lithium zinc borate glass (LZB) system with trivalent dysprosium ions (Dy³⁺) was synthesized, and the luminescence and lasing properties of these materials were examined for the generation of white light. Structural investigation through X-ray diffraction revealed that the prepared glass had an amorphous nature. The optimized glass containing 0.5 Dy³⁺ had a direct optical band gap of 2.782 eV and an indirect optical band gap of 3.110 eV. A strong excitation band at 386 nm (⁶H_15/2→⁴I_13/2) was recognized in the ultraviolet (UV) light region of its excitation spectrum. Emission bands could be seen in the photoluminescence spectrum at 659, 573, and 480 nm under the 386 nm excitation. These transitions of emission resembled electronic transitions such as (⁴F_9/2→⁶H_11/2), (⁴F_9/2→⁶H_13/2), and (⁴F_9/2→⁶H_15/2). In a pristine glass matrix, the higher intensity ratio of yellow to blue can result in the production of white light. The optimized Dy³⁺ ion concentration was observed to be 0.5 mol%. In addition, an analysis of lifetime decay was conducted for all synthesized glasses, and their decay trends were systematically investigated. Noticeably, we assessed the photometric parameters and found that they were close to the white light standard. Furthermore, a cytotoxicity study was carried out using lung fibroblast (WI-38) cell lines for the optimized 0.5Dy³⁺-doped LZB glass and it appeared to be noncytotoxic. It is clear from the results that the noncytotoxic LZB glass doped with 0.5 Dy³⁺ ions could be a suggestive choice for the manufacture of white light-emitting diodes and lasers using near-UVs.     

Inhibition of phosphatidylinositol 3'-kinase induces preferentially killing of PTEN-null T leukemias through AKT pathway

We examined the functional role of the phosphatidylinositol 3'-kinase pathway in the growth and survival of cell lines of T-cell origin. Pharmacological inhibition of PI3'-kinase using LY294002 resulted in apoptosis of acute lymphoblastic T-cell leukemia (T-ALL) cell lines including CEM, Jurkat, and MOLT-4. On the other hand, the cutaneous T-cell lymphoma cell line HUT-78 was found to be refractory to LY294002- inducible apoptosis. Sensitivity or resistance to pharmacological inhibitors of PI3'-kinase correlated with tumor suppressor PTEN gene expression, as sensitive T-ALL cells do not express PTEN and have high level of activated AKT, in contrast to HUT-78 cells. Our data demonstrate that inhibition of PI3'-kinase results in dephosphorylation of AKT and partial inhibition of Bcl-xL expression in T-ALL cells, but not in HUT-78 cells. Interestingly, HUT-78 cells were also found to express higher levels of Bcl-xL protein as compared to T-ALL cells. Inhibition of PI3'-kinase also induces release of cytochrome c from mitochondria and activation of caspase-3 and PARP in all T-ALL cell lines tested, but not in HUT-78 cells. Taken altogether, our data demonstrate that the PI3'-kinase/AKT pathway plays a major role in the growth and survival of PTEN-null T-ALL cells, and identify this cascade as promising target for therapeutic intervention in acute T-cell leukemias.     

Isolation and characterization of mucous exopolysaccharide (EPS) produced by Vibrio furnissii strain VB0S3

Marine bacterial strains were isolated from coastal regions of Goa and screened for the strains that produce the highest amount of mucous exopolysaccharide (EPS). Our screening resulted in the identification of the strain Vibrio furnissii VB0S3 (hereafter called VB0S3), as it produced the highest EPS in batch cultures during the late logarithmic growth phase. The isolate was identified as VB0S3 based on morphological and biochemical properties. Growth and EPS production were studied in mineral salts medium supplemented with NaCl (1.5%) and glucose (0.2%). The exopolymer was recovered from the culture supernatant by using three volumes of cold ethanol precipitation and dialysis procedure. Chemical analyses of EPS revealed that it is primarily composed of neutral sugars, uronic acids, and proteins. Fourier-transform infrared (FT-IR) spectroscopy revealed the presence of carboxyl, hydroxyl, and amide groups, which correspond to a typical heteropolymeric polysaccharide, and the EPS also possessed good emulsification activity. The gas chromatographic analysis of an alditol-acetate derivatized sample of EPS revealed that it was mainly composed of galactose and glucose. Minor components found were mannose, rhamnose, fucose, ribose, arabinose, and xylose. EPS was readily isolated from culture supernatants, which suggests that the EPS was a slime-like exopolysaccharide. This is the first report of exopolysaccharide characterization that describes the isolation and characterization of an EPS expressed by Vibrio furnissii strain VB0S3. The results of the study contribute significantly and go a long way towards an understanding of the correlation between growth and EPS production, chemical composition, and industrial applications of the exopolysaccharide in environmental biotechnology and bioremediation.     

Prediction of a new surface binding pocket and evaluation of inhibitors against huntingtin interacting protein 14: an insight using docking studies

Protein—protein interactions play an important role in regulating the expression of huntingtin protein (htt). Expansion of polyglutamine tracts in htt results in neurodegenerative Huntington disease. Huntingtin interacting protein (HIP14) is an important interacting partner of htt and the altered interactions have been proposed to play an important role in disease progression. In the present study, an attempt has been made to explore the potential of several known Huntington inhibitors to inhibit HIP14. The docking studies have resulted in the identification of a novel binding site for these inhibitors distinct from the previously known ankyrin repeat domain. The results have been validated using geometry based docking transformations against the other binding pocket. The specificity of binding has been determined with high values of both accuracy and precision. Nine potential inhibitors obtained after screening belong to three distinct classes of compounds viz, carbohydrates (deoxy-glucose), alcohols (including phenolic scaffold) and tetracycline. The compounds form stable complex with protein exhibiting optimal intermolecular and Gibbs free energy. The hydrogen bonding and hydrophobic interactions predominantly contribute to the stability of these complexes. The present study identifies metoprolol, minocyclines and 18 F fluorodeoxyglucose as the best inhibitors that bind specifically to the new site. Therefore, these compounds can further be exploited for their potential to serve in the diagnosis and treatment of Huntington disease. The quantitative predictions provide a scope for experimental testing in future.     

The role of zoos in the rehabilitation of animals in the circus

In 1998, the government of India enforced a ban on performance/exhibition of 5 species of nonhuman animals: (a) lions, (b) tigers, (c) leopards, (d) bears, and (e) monkeys. The Ministry of Environment and Forests gave the responsibility to the Central Zoo Authority (CZA) for rehabilitation of these animals. Between 1999 and 2001, the CZA created rescue centers for rehabilitation of lions and tigers in the off-display areas of 5 zoos: (a) Bangalore, (b) Chennai, (c) Vishakhapatnam, (d) Tirupathi, and (e) Jaipur. Today, the CZA has rehabilitated 314 lions and tigers from circuses. The CZA has been meeting the expenses toward maintenance (feeding of and providing health care for) of the animals, outsourcing of staff, and maintaining enclosures. This article focuses on the mammoth work that the selected zoos had to carry out in rehabilitating the lions and tigers from the circuses.     

In silico modeling and hydrogen peroxide binding study of rice catalase

Homology modeling of the catalase, CatC cloned and sequenced from rice (Oryza sativa L., cv Ratna an Indica cultivar) has been performed based on the crystal structure of the catalase CatF (PDB code 1m7s) by using the software MODELLER. With the aid of molecular mechanics and molecular dynamics methods, the final model is obtained and is further assessed by PROCHECK and VERIFY - 3D graph, which show that the final refined model is reliable. With this model, a flexible docking study with the hydrogen peroxide, the substrate for catalase, is performed and the results indicate that Arg310, Asp343 and Arg346 in catalase are three important determinant residues in binding as they have strong hydrogen bonding contacts with the substrate. These hydrogen-bonding interactions play an important role for the stability of the complex. Our results may be helpful for further experimental investigations.