Enzymic synthesis,chemical characterisation and Sda activity of GalNAcß1-4[NeuAcα2-3]Galß1-4GlcNAc and GalNAcß1-4[NeuAcα2-3]Galß1-4Glc

The tetrasaccharides GalNAcß1-4[NeuAc2-3]Galß1-4Glc and GalNAcß1-4[NeuAc2-3]Galß1-4GlcNAc were synthesised by enzymic transfer of GalNAc from UDP-GalNAc to 3-sialyllactose (NeuAc2-3Galß1-4Glc) and 3-sialyl-N-acetyllactosamine (NeuAc2-3Galß1-4GlcNAc). The structures of the products were established by methylation and¹H-500 MHz NMR spectroscopy. In Sd^a serological tests the product formed with 3-sialyl-N-acetyllactosamine was highly active whereas that formed with 3-sialyllactose had only weak activity.     

Dopamine mediates context-dependent modulation of sensory plasticity in C. elegans

Dopamine has been implicated in the modulation of diverse forms of behavioral plasticity, including appetitive learning and addiction. An important challenge is to understand how dopamine's effects at the cellular level alter the properties of neural circuits to modify behavior. In the nematode C. elegans, dopamine modulates habituation of an escape reflex triggered by body touch. In the absence of food, animals habituate more rapidly than in the presence of food; this contextual information about food availability is provided by dopaminergic mechanosensory neurons that sense the presence of bacteria. We find that dopamine alters habituation kinetics by selectively modulating the touch responses of the anterior-body mechanoreceptors; this modulation involves a D1-like dopamine receptor, a Gq/PLC-beta signaling pathway, and calcium release within the touch neurons. Interestingly, the body touch mechanoreceptors can themselves excite the dopamine neurons, forming a positive feedback loop capable of integrating context and experience to modulate mechanosensory attention.     

Rabbit heavy chain haplotypes — Allotypic determinants expressed byVH-CH recombinants

This report summarizes our current understanding of the heavy chain haplotypes found in our laboratories' rabbits. Independently derived data from several laboratories have been synthesized into a consistent picture of the linked inheritance of allotypic markers found on the different heavy chain classes and subclasses of rabbit immunoglobulins in pedigreed rabbits, including the families of three apparentVH-CH recombinants. In one recombinant, the entire group ofCH markers (C, C, and C) recombined with the set ofVH. Although in the other two recombinants all CH markers may also have recombined as a group, in one of these only IgG and IgACH genes were informative; in the other recombinant, only the IgG allotypes were informative. Some allotypic determinants found on IgM molecules (conformational) appear only when a specific variable region allotype (VHa) is combined with a specific constant region allotype (C). New combinations ofVHa and C allotypes were generated in two of the genetic recombinants and led to new conformational determinants. The gains and losses observed lend support to the hypothesis that the determinants result from conformations generated by the combination of allotype-specificVH and C protein sequences. Conceivably, DNA events that joinVH to diversity (D)- and joining (J)-coding sequences or mRNA processing events that splice J to C could be involved in generating the sequences that form allotype-specific determinants.     

Force spectroscopy of collagen fibers to investigate their mechanical properties and structural organization

Tendons are composed of collagen and other molecules in a highly organized hierarchical assembly, leading to extraordinary mechanical properties. To probe the cross-links on the lower level of organization, we used a cantilever to pull substructures out of the assembly. Advanced force probe technology, using small cantilevers (length <20 microm), improved the force resolution into the sub-10 pN range. In the force versus extension curves, we found an exponential increase in force and two different periodic rupture events, one with strong bonds (jumps in force of several hundred pN) with a periodicity of 78 nm and one with weak bonds (jumps in force of <7 pN) with a periodicity of 22 nm. We demonstrate a good correlation between the measured mechanical behavior of collagen fibers and their appearance in the micrographs taken with the atomic force microscope.     

Molecular dynamics simulations of the lipid bilayer edge

Phospholipid bilayers have been intensively studied by molecular dynamics (MD) simulation in recent years. The properties of bilayer edges are important in determining the structure and stability of pores formed in vesicles and biomembranes. In this work, we use molecular dynamics simulation to investigate the structure, dynamics, and line tension of the edges of bilayer ribbons composed of pure dimyristoylphosphatidylcholine (DMPC) or palmitoyl-oleoylphosphatidylethanolamine (POPE). As expected, we observe a significant reorganization of lipids at and near the edges. The treatment of electrostatic effects is shown to have a qualitative impact on the structure and stability of the edge, and significant differences are observed in the dynamics and structure of edges formed by DMPC and palmitoyl-oleoylphosphatidylethanolamine. From the pressure anisotropy in the simulation box, we calculate a line tension of approximately 10-30 pN for the DMPC edge, in qualitative agreement with experimental estimates for similar lipids.     

Label-free, multiplexed detection of bacterial tmRNA using silicon photonic microring resonators

This work describes the development of an automated flow-based biosensor that employs genetically modified acetylcholinesterase (AChE) enzymes B394, B4 and wild type B131. The biosensor was based on a screen printed carbon electrode (SPE) that was integrated into a flow cell. Enzymes were immobilised on cobalt (II) phthalocyanine (CoPC) modified electrodes by entrapment in a photocrosslinkable polymer (PVA-AWP). The automated flow-based biosensor was successfully used to quantify three organophosphate pesticides (OPs) in milk samples. The OPs used were chlorpyriphos-oxon (CPO), ethyl paraoxon (EPOx) and malaoxon (MOx). The total analysis time for the assay was less than 15 min. Initially, the biosensor performance was tested in phosphate buffer solution (PBS) using B394, B131 and B4 biosensors. The best detection limits were obtained with B394; therefore, this biosensor was used to produce calibration data in milk with three OPs in the concentration range of 5 × 10(-6)M to 5 × 10(-12)M. The limit of detection (LOD) obtained in milk for CPO, EPOx and MOx were 5 × 10(-12)M, 5 × 10(-9)M and 5 × 10(-10)M, respectively, with a correlation coefficient R(2)=0.9910. The automated flow-based biosensor successfully quantified the OPs in different fat-containing milk samples. There were no false positives or false negatives observed for the analytical figures of merit for the constructed biosensors. This method is inexpensive, sensitive, portable, non-invasive and provides real-time results. This analytical system can provide rapid detection of highly toxic OPs in food matrices such as milk.     

The species–area relationship in centipedes (Myriapoda: Chilopoda): a comparison between Mediterranean island groups

The present study article examines the shapes of centipede species–area relationships (SARs) in the Mediterranean islands, compares the results of the linear form of the power model between archipelagos, discusses biological significance of the power model parameters with other taxa on the Aegean archipelago, and tests for a significant small‐island effect (SIE). We used 11 models to test the SARs and we compared the quality‐of‐fit of all candidate models. The power function ranked first and Z‐values was in the range 0.106–0.334. We assessed the presence of SIEs by fitting both a continuous and discontinuous breakpoint regression model. The continuous breakpoint regression functions never performed much better than the closest discontinuous model as a predictor of centipede species richness. We suggest that the relatively low Z‐values in our data partly reflect better dispersal abilities in centipedes than in other soil invertebrate taxa. Longer periods of isolation and more recent island formation may explain the somewhat lower constant c in the western Mediterranean islands compared to the Aegean islands. Higher breakpoint values in the western Mediterranean may also be a result of larger distance to the mainland and longer separation times. Despite the differences in the geological history and the idiosyncratic features of the main island groups considered, the overall results are quite similar and this could be assigned to the ability of centipedes to disperse across isolation barriers. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 105 , 146–159.     

Use of the Gram stain in microbiology

The Gram stain differentiates bacteria into two fundamental varieties of cells. Bacteria that retain the initial crystal violet stain (purple) are said to be 'Gram-positive,' whereas those that are decolorized and stain red with carbol fuchsin (or safranin) are said to be 'Gram-negative.' This staining response is based on the chemical and structural makeup of the cell walls of both varieties of bacteria. Gram-positives have a thick, relatively impermeable wall that resists decolorization and is composed of peptidoglycan and secondary polymers. Gram-negatives have a thin peptidoglycan layer plus an overlying lipid-protein bilayer known as the outer membrane, which can be disrupted by decolorization. Some bacteria have walls of intermediate structure and, although they are officially classified as Gram-positives because of their linage, they stain in a variable manner. One prokaryote domain, the Archaea, have such variability of wall structure that the Gram stain is not a useful differentiating tool.