Structure of a ricin mutant showing rescue of activity by a noncatalytic residue.

Ricin A chain is an N-glycosidase which removes a single adenine base from a conservative loop of 28S rRNA, thereby inactivating eukaryotic ribosomes. The mechanism of action has been proposed to include transition-state stabilization of an oxycarbonium ion on the substrate ribose by interaction with Glu 177. Conversion of Glu 177 to Gln reduces activity nearly 200-fold [Ready, M. P., Kim, Y., & Robertus, J. D. (1991) Proteins: Struct., Funct., Genet. 10, 270-278] while conversion to Ala (E177A) reduces activity only 20-fold [Schlossman, D., Withers, D., Welsh, P., Alexander, A., Robertus, J., & Frankel, A. (1989) Mol. Cell. Biol. 9, 5012-5021]. X-ray analysis of the latter mutant protein shows that a residue at the edge of the active site, Glu 208, rotates into the space left vacant by the mutation. Its rearranged carboxylate partially substitutes for that of Glu 177. This is equivalent to the rescue of enzyme activity by a second-site reversion. Kinetic analysis shows the E177A mutation affects kcat and not Km, consistent with the notion that the carboxylate serves in transition-state stabilization.     

Nonserine esterases from rat liver cytosol

An effort to identify the major general esterases of rat liver cytosol that are insensitive to the serine esterase inhibitor paraoxon (diethyl 4-nitrophenyl phosphate) has led to the isolation of a dozen enzymes. Four of these are electrophoretically homogeneous. Although purified on the basis of their hydrolytic activity toward 4-nitrophenyl acetate, each of the enzymes has a very broad and overlapping substrate specificity for aromatic esters. Thiol esters serve as substrates but, within the limits of the methods used, amides are not hydrolyzed.     

Microcalorimetric investigations of the interactions of small ions with arterial elastin

The enthalpies of interactions of porcine arterial elastin with alkali metal and alkali earth halides and sulphates were investigated by means of flow microcalorimetry and the stoichiometry measured using radiotracer techniques. In aqueous solutions, all alkali earth halides interacted exothermically at concentrations ranging from 0.01 to 2.5M. All the alkali metal halides, particularly NaCl, exhibited complex concentration-dependent interactions, exothermic at low concentrations and endothermic at high concentrations. Both the anion and cation contributed to the response, although the anion seemed to dominate. SO interacted most strongly of the anions tested. All interactions were reversible in the sense that repeat experiments gave identical results, but the enthalpy of “adsorption” was generally different from that of “desorption.” The enthalpy of interaction depended on the conformation of the elastin in a salt-specific manner. For example, CaCl₂ and MgCl₂ interacted similarly in water but very differently in 1 : 1 water : methanol. © 1994 John Wiley & Sons, Inc.     

Expression of human factor X with normal biological activity in human embryonic kidney cells

Summary Human embryonic kidney cells (293) were transfected with a construct containing human factor X cDNA and selected for G418 resistance. The level of expression of recombinant factor X in serum-free medium was 4 to 5 g/ml. Purified recombinant factor X had a molecular size identical to that of normal plasma factor X. Amino-terminal sequencing revealed normal processing cleavages. The -carboxy Glu and -OH Asp content of the recombinant factor X was close to 90% of the expected levels of these post-translational residues. The specific activity of recombinant factor X was about 95% of that of plasma factor X in three plasma-based clotting assays. This report demonstrates that 293 cells can produce a high level of biologically active factor X and describes a visual criterion for verifying the transfection process.Abbreviations FX factor X - rFX recombinant factor X - DMEM Dulbecco's modified Eagle's medium - RVV-X Russell's viper venom - SDS-PAGE sodium dodecyl sulfatepolyacrylamide gel electrophoresis - Gla -carboxy glutamic acid     

Chirospecific synthesis of D and Lp-chlorohomophenylalanine N-t-BOC DCHA salts

Summary The chirospecific conversions of D-glucosamine hydrochloride and D-mannosamine hydrochloride to the configurationally stable L and D isomers of N-t-butyloxycarbonylserinal were carried out byt-butylcarbonylation followed by sodium borohydride reduction and sodium meta-periodate oxidation. Reaction of the L and D aldehydes with the Wittig reagent prepared from 4-chlorobenzyltriphenylphosphonium chloride and butyl lithium followed by catalytic hydrogenation, Jones oxidation and salt formation with dicyclohexylamine gave the DCHA salts of the D and L isomers ofp-chlorohomophenylalanine N-t-Boc in high enatiomeric excess. The optical purity of the title compounds was established by hydrolysis to the respective free amino acids, followed by chiral derivatization and HPLC analysis.This was presented at the Fifth International Kyoto Conference on new Aspects of Organic Chemistry, Kyoto, Japan, November 11–15, 1991. Abstract #GO-13.     

Production and initial characterisation of the xylan-degrading system of Phanerochaete chrysosporium

We report the optimum conditions for the degradation of oat spelt arabinoxylan and a preliminary characterisation of the inducible xylan-degrading system of the lignin-degrading white-rot fungus Phanerochaete chrysosporium. Xylanase activity was optimal at pH 5.0 and 50°C; see attached sheet the maximum reaction velocity (V_max) of the system was 3.86 units (U) mg^–1 protein with arabinoxylan as substrate and the substrate concentration giving half V_max (S_0.5) was 0.52 mg ml^–1. At concentrations of arabinoxylan greater than 15 mg ml^–1 excess substrate inhibition was observed. Xylose at 0.9 mm inhibited activity to the extent of 50%. Xylanase activity increased as a function of the dilution of the enzyme preparation prior to assay. It was resolved into four peaks by using a DEAE-Biogel column; the material in these peaks differed with respect to xylan solubilisation and the formation of reducing sugars. Electrofocusing gels allowed visualisation of several bands of activity corresponding to each peak. The arabinoxylan degradation system of P. chrysosporium is therefore composed of multiple components. Correspondence to: P. Broda     

Z → B transition in poly[d(G-m5C)2] induced by interaction with 4′,6-diamidino-2-phenylindole

The Z form of poly[d(G-m⁵C)₂], in presence of Mg²⁺ ion, is found to be transformed into B form upon interaction with 4′,6-diamidino-2-phenylindole (DAPI). The Z → B transformation is complete at a mixing ratio of about 0.07 DAPI per DNA base pairs, i.e., each DAPI molecule may be related to the conversion of 6–7 base pairs. An interaction between DAPI and poly[d(G-m⁵C)₂] in its Z form at low drug: DNA ratios is suggested from optical dichroism and time-resolved luminescence anisotropy results. The spectroscopic behaviour of DAPI indicates that the Z conformation of DNA does not provide normal binding sites for DAPI, such as groove or intercalation sites, but that the initial association may be of external nature. © 1993 John Wiley & Sons, Inc.     

Cytological and molecular characterization of a chromosome interchange and addition lines in Cadet involving chromosome 5B of wheat and 6Ag of Lophopyrum ponticum

Efforts to transfer wheat curl mite (Eriophyes tulipae Keifer) resistance from Lophopyrum ponticum 10X (Podb.) Love to bread wheat (Triticum aestivum L.) have resulted in the production of a number of cytogenetic stocks, including an addition line of 6Ag, a ditelo addition line, and a wheat-Lophopyrum translocation line. Characterization of these lines with C-banding, in situ hybridization with a Lophopyrum species-specific repetitive DNA probe (pLeUCD2), and Southern blotting with pLeUCD2 and a 5S ribosomal DNA probe (pScT7) confirmed that the distal portion of the short arm of 6Ag was translocated onto the distal portion of 5BS (5BL. 5BS-6AgS). It was also determined that the ditelo addition was an acrocentric chromosome of 6AgS.     

Mechancial properties of bat wing membrane skin

The skin of the bat wing in functionally unique among mammals: it serves as a major locomotor organ in addition to its protective and regulatory functions. We used tensile testing to investigate the mechanical capabilities of wing membrane skin, and compared stiffness, strength, load at failure, and energy absorption among specific wing regions and among a variety of bat taxa. We related these characteristics to the highly architectural fibrous supporting network of the wing membrane. We found that all material properties showed a strong anisotropy. In particular, wing membrane skin shows maximum stiffness and stregth parallel to the wing skeleton, and greatest extensibility parallel to the wing's trailing edge. We also found significant variation among wing regions. The uropatagium (tail membrane) supported the greatest load at failure, and the plagiopatagium (proximal wing membrane between laterl body wall and hand skeleton) is the weakest and most extensible part of the wing. We believe that the increased load bearing ability of the uropatagium relats to its key role in capture of insect prey, and that the great extensibility of the plagiopatagium promotes development of camber near the wing's centre of lift. In interspecific comparisons, energy absorpion and load to failure were greatest in Artibeus jamaicensis , the largest bat in our sample and the species with the highest wing loading, suggesting that wing loading may play a role in dictating the fuctional design of wing membranes.