Cloning, sequencing, and expression of the structural genes for the cytochrome and flavoprotein subunits of p-cresol methylhydroxylase from two strains of Pseudomonas putida.

The structural genes for the flavoprotein subunit and cytochrome c subunit of p-cresol (4-methylphenol) methylhydroxylase (PCMH) from Pseudomonas putida NCIMB 9869 (National Collection of Industrial and Marine Bacteria, Aberdeen, Scotland) and P. putida NCIMB 9866 were cloned and sequenced. The genes from P.putida NCIMB 9869 were for the plasmid-encoded A form of PCMH, and the genes from P.putida NCIMB 9866 were also plasmid encoded. The nucleotide sequences of the two flavoprotein genes from P.putida NCIMB 9869 and P.putida NCIMB 9866 (pchF69A and pchF66, respectively) were the same except for 5 bases out of 1,584, and the translated amino acid sequences were identical. The nucleotide sequences of the genes for the cytochrome subunits of PCMH from the two bacteria (pchC69A and pchC66) varied by a single nucleotide in their 303-base sequences, and the translated amino acid sequences differed by a single residue at position 41 (Asp in PchC69A and Ala in PchC66). Both cytochromes had 21-residue signal sequences, as expected for periplasmic proteins, and these sequences were identical. On the other hand, no signal sequences were found for the flavoproteins.pchF69A and pchC69A were expressed, separately or together, in Escherichia coli JM109 and P.putida RA4007, with active PCMH produced in both bacteria. The E. coli-expressed flavocytochrome was purified. Our studies indicated that the E.coli-expressed subunits were identical to the subunits expressed in P.putida NCIMB 9869: molecular weights, isoelectric points, UV-visible spectra, and steady-state kinetic parameters were the same for the two sets of proteins. The subunits readily associated upon mixing two crude extracts of E.coli, one extract containing PchC69A and the other containing PchF69A. The courses of association of PchC69A and PchF69A were essentially identical for pure E. coli-expressed subunits and pure P. putida 9869-expressed subunits. E. coli-expressed PchC69A and PchF69A contained covalently bound heme and covalently bound flavin adenine dinucleotide, respectively, as the proteins expressed in nature.     

Microcalorimetric investigations of the interactions of small ions with arterial elastin

The enthalpies of interactions of porcine arterial elastin with alkali metal and alkali earth halides and sulphates were investigated by means of flow microcalorimetry and the stoichiometry measured using radiotracer techniques. In aqueous solutions, all alkali earth halides interacted exothermically at concentrations ranging from 0.01 to 2.5M. All the alkali metal halides, particularly NaCl, exhibited complex concentration-dependent interactions, exothermic at low concentrations and endothermic at high concentrations. Both the anion and cation contributed to the response, although the anion seemed to dominate. SO interacted most strongly of the anions tested. All interactions were reversible in the sense that repeat experiments gave identical results, but the enthalpy of “adsorption” was generally different from that of “desorption.” The enthalpy of interaction depended on the conformation of the elastin in a salt-specific manner. For example, CaCl₂ and MgCl₂ interacted similarly in water but very differently in 1 : 1 water : methanol. © 1994 John Wiley & Sons, Inc.     

Structures of wild-type and mutant signal sequences of Escherichia coli ribose binding protein.

The structure of a chemically synthesized 25-residue-long functional signal peptide of Escherichia coli ribose binding protein was compared with that of a nonfunctional mutant-signal peptide using circular dichroism and two-dimensional 1H NMR in solvents mimicking the amphiphilic environments. The functional peptide forms an 18-residue-long alpha-helix starting from the NH2-terminal region and reaching to the hydrophobic stretch in a solvent consisting of 10% dimethylsulfoxide, 40% water, and 50% trifluoroethanol (v/v). The nonfunctional mutant peptide, which contains a Pro at position 9 instead of a Leu in the wild-type peptide, does not have any secondary structure in that solvent but forms a 12-residue-long alpha-helix within the hydrophobic stretch in water/trifluoroethanol (50:50, v/v) solvent. It seems that the Pro-9 residue in the nonfunctional peptide disturbs the helix propagation from the hydrophobic stretch to the NH2-terminal region. Because both of these peptides have stable helices within the hydrophobic stretch, it may be concluded that the additional 2 turns of the alpha-helix in the NH2-terminal region of the wild-type signal peptide is important for its function.     

The importance of NaCl concentration in a chemically defined medium for the development of bovine oocytes matured and fertilized in vitro

Bovine oocytes matured and fertilized in vitro were cultured in a chemically defined medium (modified Tyrode's solution) without glucose. When different concentrations of NaCl were added to the medium, the proportions of embryos developed to the >/=8-cell, morula and blastocyst stages 96, 144 and 192 h post insemination, respectively, were significantly higher at 89 to 114 mM than 64 to 76 and 126 to 139 mM NaCl. A high proportion (28%) of blastocyst-stage embryos 192 h post insemination was obtained at 89 mM NaCl. When calculated osmolarity in the medium with 64 mM NaCl was varied by adding D-sorbitol, significantly higher proportions of morula-stage embryos were obtained at 265 to 315 mOsm (27 to 38%) than 215 (9%) and 365 (2%) mOsm, but the development to the blastocyst stage was difficult at any osmolarities (215 to 365 mOsm) tested. In the medium with a fixed osmolarity (315 mOsm) but with different concentrations (64 to 114 mM) of NaCl, there were no differences in the proportions (29 to 33%) of morula-stage embryos among different NaCl concentrations. However, significantly higher proportions of embryos developed to the blastocyst stage at 89 to 101 mM (22 to 23%) than 64 to 76 (0 to 9%) and 114 (11%) mM NaCl. When Cl- concentration in the medium with 64 mM NaCl was adjusted by adding choline chloride, significantly higher proportions of embryos developed to the morula stage at 97 to 122 mM (32 to 40%) than 72 (6%) and 147 (2%) mM Cl-, but few embryos developed to the blastocyst stage at any Cl- concentrations (72 to 147 mM) tested. In the medium with 64 or 114 mM NaCl and each with 2 different Na (+)K (+) ratios, there were no differences in the proportions of morula- and blastocyst-stage embryos between different Na+ K+ ratios (31 and 39 at 64 mM NaCl, and 39 and 47 at 114 mM NaCl) at each NaCl concentration. When glucose was added to the medium with 89 mM NaCl 120 h postinsemination, there were no significant differences in the proportions (40 to 48%) of morula-stage embryos 144 h post insemination among different concentrations (0 to 6.95 mM) of glucose. The proportion (33%) of blastocysts 192 h post insemination at 2.78 mM glucose was significantly higher than the values at 0 (22%), 5.56 (19%) and 6.95 (15%) mM but not different compared with the values at 1.39 (23%) and 4.17 (28%) mM. In conclusion, NaCl concentration in a defined medium is one of the most important factors for the development of bovine embryo to the blastocyst stage, but the development of embryos up to the morula stage is also regulated by osmolarity and/or Cl-concentration.     

Expression of the BnmNAP subfamily of napin genes coincides with the induction of Brassica microspore embryogenesis

Brassica napus cv. Topas microspores can be diverted from pollen development toward haploid embryo formation in culture by subjecting them to a heat stress treatment. We show that this switch in developmental pathways is accompanied by the induction of high levels of napin seed storage protein gene expression. Changes in the plant growth or microspore culture conditions were not by themselves sufficient to induce napin gene expression. Specific members of the napin multigene family were cloned from a cDNA library prepared from microspores that had been induced to undergo embryogenesis. The majority of napin clones represented three members (BnmNAP2, BnmNAP3 and BnmNAP4) that, along with a previously isolated napin genomic clone (BngNAP1), constitute the highly conserved BnmNAP subfamily of napin genes. Both RNA gel blot analysis, using a subfamily-specific probe, and histochemical analysis of transgenic plants expressing a BngNAP1 promoter--glucuronidase gene fusion demonstrated that the BnmNAP subfamily is expressed in embryogenic microspores as well as during subsequent stages of microsporic embryo development.     

Biogeochemical cycling of sulfur and iron in sediments of a south-east Asian mangrove,Phuket Island,Thailand

Benthic sulfate reduction and sediment pools of sulfur and iron were examined during January 1992 at 3 stations in the Ao Nam Bor mangrove, Phuket, Thailand. Patterns of sulfate reduction rates (0–53 cm) reflected differences in physical and biological conditions at the 3 stations, and highest rates were found at the vegetated site within the mangrove (Rhizophora apiculata) forest. Due to extended oxidation of mangrove sediments, a large portion of the added³⁵S-label was recovered in the chromium reducible pools (FeS₂ and S⁰) (41–91% of the reduced sulfur). Pyrite was the most important inorganic sulfur component, attaining pool sizes 50–100 times higher than acid volatile pools (FeS). HCl-extractable (0.5 M HCl) iron pools, including Fe(II)_HCl and Fe(III)_HCl, were generally low and Fe(III)_HCl was only present in the upper surface layers (0–5 cm). Maximum concentrations of dissolved Fe²⁺ (35–285 M) occurred just about the depth where dissolved H₂S accumulated. Furthermore Fe²⁺ and H₂S coexisted only where concentrations of both were low. There was an accumulation of organic sulfur in the deep sediment at 2 stations in the inner part of the mangrove. The reoxidation of reduced sulfides was rapid, and storage of sulfur was minor in the upper sediment layers, where factors like bioturbation, the presence of roots, or tidal mixing enhance oxidation processes.Author of correspondence.     

Proteolytic activity of human cytomegalovirus UL80 protease cleavage site mutants.

The human cytomegalovirus UL80 open reading frame encodes protease and assembly protein from its N- and C-terminal regions, respectively. We reported previously that a 30-kDa protease is derived by autoproteolytic processing of a polyprotein which is the translation product of the entire UL80 open reading frame (E. Z. Baum, G. A. Bebernitz, J. D. Hulmes, V. P. Muzithras, T. R. Jones, and Y. Gluzman, J. Virol. 67:497-506, 1993). Three autoproteolytic cleavage sites within the UL80 polyprotein were characterized; site 143 is within the protease domain and inactivates the protease. In this article, we report (i) expression analyses of UL80 in infected cells, including the processing kinetics of the UL80 polyprotein; (ii) the existence of an additional cleavage site (site 209) within the protease domain of the UL80 polyprotein; and (iii) the effect of mutagenesis at each of the cleavage sites upon proteolytic activity and steady-state levels of the UL80 processing products. During the course of infection, UL80 polyprotein processing begins at cleavage site 643 and follows at sites 256 and 143. Cleavage at site 643 and/or 256 within the polyprotein is not a prerequisite for efficient protease activity, since all three proteases (85-, 80-, and 30-kDa proteins) were equally active in cleaving the assembly protein precursor to its mature form. Inhibition of cleavage at site 143 resulted in a three- to sixfold increase in the steady-state level of the 30-kDa protease, supporting the hypothesis that cleavage at this site may represent a mechanism by which cytomegalovirus regulates the level of active protease.