Cell Surface Analysis Techniques: What Do Cell Preparation Protocols Do to Cell Surface Properties?

Cell surface analysis often requires manipulation of cells prior to examination. The most commonly employed procedures are centrifugation at different speeds, changes of media during washing or final resuspension, desiccation (either air drying for contact angle measurements or freeze-drying for sensitive spectroscopic analysis, such as X-ray photoelectron spectroscopy), and contact with hydrocarbon (hydrophobicity assays). The effects of these procedures on electrophoretic mobility, adhesion to solid substrata, affinity to a number of Sepharose columns, structural integrity, and cell viability were systematically investigated for a range of model organisms, including carbon- and nitrogen-limited Psychrobacter sp. strain SW8 (glycocalyx-bearing cells), Escherichia coli (gram-negative cells without a glycocalyx), and Staphylococcus epidermidis (gram-positive cells without a glycocalyx). All of the cell manipulation procedures severely modified the physicochemical properties of cells, but with each procedure some organisms were more susceptible than others. Considerable disruption of cell surfaces occurred when organisms were placed in contact with a hydrocarbon (hexadecane). The majority of cells became nonculturable after air drying and freeze-drying. Centrifugation at a high speed (15,000 × g) modified many cell surface parameters significantly, although cell viability was considerably affected only in E. coli. The type of washing or resuspension medium had a strong influence on the values of cell surface parameters, particularly when high-salt solutions were compared with low-salt buffers. The values for parameters obtained with different methods that allegedly measure similar cell surface properties did not correlate for most cells. These results demonstrate that the methods used to prepare cells for cell surface analysis need to be critically investigated for each microorganism so that the final results obtained reflect the nature of the in situ microbial cell surface as closely as possible. There is an urgent need for new, reliable, nondestructive, minimally manipulative cell surface analysis techniques that can be used in situ.     

Accumulation of Polyhydroxyalkanoate from Styrene and Phenylacetic Acid by Pseudomonas putida CA-3

Pseudomonas putida CA-3 is capable of converting the aromatic hydrocarbon styrene, its metabolite phenylacetic acid, and glucose into polyhydroxyalkanoate (PHA) when a limiting concentration of nitrogen (as sodium ammonium phosphate) is supplied to the growth medium. PHA accumulation occurs to a low level when the nitrogen concentration drops below 26.8 mg/liter and increases rapidly once the nitrogen is no longer detectable in the growth medium. The depletion of nitrogen and the onset of PHA accumulation coincided with a decrease in the rate of substrate utilization and biochemical activity of whole cells grown on styrene, phenylacetic acid, and glucose. However, the efficiency of carbon conversion to PHA dramatically increased once the nitrogen concentration dropped below 26.8 mg/liter in the growth medium. When supplied with 67 mg of nitrogen/liter, the carbon-to-nitrogen (C:N) ratios that result in a maximum yield of PHA (grams of PHA per gram of carbon) for styrene, phenylacetic acid, and glucose are 28:1, 21:1, and 18:1, respectively. In cells grown on styrene and phenylacetic acid, decreasing the carbon-to-nitrogen ratio below 28:1 and 21:1, respectively, by increasing the nitrogen concentration and using a fixed carbon concentration leads to lower levels of PHA per cell and lower levels of PHA per batch of cells. Increasing the carbon-to-nitrogen ratio above 28:1 and 21:1 for cells grown on styrene and phenylacetic acid, respectively, by decreasing the nitrogen concentration and using a fixed carbon concentration increases the level of PHA per cell but results in a lower level of PHA per batch of cells. Increasing the carbon and nitrogen concentrations but maintaining the carbon-to-nitrogen ratio of 28:1 and 21:1 for cells grown on styrene and phenylacetic acid, respectively, results in an increase in the total PHA per batch of cells. The maximum yields for PHA from styrene, phenylacetic acid, and glucose are 0.11, 0.17, and 0.22 g of PHA per g of carbon, respectively.     

Polysaccharide intercellular adhesin (PIA) protects Staphylococcus epidermidis against major components of the human innate immune system

The skin commensal and opportunistic pathogen Staphylococcus epidermidis is the leading cause of nosocomial and biofilm-associated infections. Little is known about the mechanisms by which S. epidermidis protects itself against the innate human immune system during colonization and infection. We used scanning electron microscopy to demonstrate that the exopolysaccharide intercellular adhesin (PIA) resides in fibrous strands on the bacterial cell surface, and that lack of PIA production results in complete loss of the extracellular matrix material that has been suggested to mediate immune evasion. Phagocytosis and killing by human polymorphonuclear leucocytes was significantly increased in a mutant strain lacking PIA production compared with the wild-type strain. The mutant strain was also significantly more susceptible to killing by major antibacterial peptides of human skin, cationic human beta-defensin 3 and LL-37, and anionic dermcidin. PIA represents the first defined factor of the staphylococcal biofilm matrix that protects against major components of human innate host defence.     

Variation analysis and gene annotation of eight MHC haplotypes: The MHC Haplotype Project

The human major histocompatibility complex (MHC) is contained within about 4 Mb on the short arm of chromosome 6 and is recognised as the most variable region in the human genome. The primary aim of the MHC Haplotype Project was to provide a comprehensively annotated reference sequence of a single, human leukocyte antigen-homozygous MHC haplotype and to use it as a basis against which variations could be assessed from seven other similarly homozygous cell lines, representative of the most common MHC haplotypes in the European population. Comparison of the haplotype sequences, including four haplotypes not previously analysed, resulted in the identification of >44,000 variations, both substitutions and indels (insertions and deletions), which have been submitted to the dbSNP database. The gene annotation uncovered haplotype-specific differences and confirmed the presence of more than 300 loci, including over 160 protein-coding genes. Combined analysis of the variation and annotation datasets revealed 122 gene loci with coding substitutions of which 97 were non-synonymous. The haplotype (A3-B7-DR15; PGF cell line) designated as the new MHC reference sequence, has been incorporated into the human genome assembly (NCBI35 and subsequent builds), and constitutes the largest single-haplotype sequence of the human genome to date. The extensive variation and annotation data derived from the analysis of seven further haplotypes have been made publicly available and provide a framework and resource for future association studies of all MHC-associated diseases and transplant medicine. Horton and Gibson contributed equally to this work.     

Enzymes involved in fatty acid and polyketide biosynthesis in Streptomyces glaucescens: role of FabH and FabD and their acyl carrier protein specificity

Malonyl acyl carrier protein (ACP) is used as an extender unit in each of the elongation steps catalyzed by the type II dissociated fatty acid synthase (FAS) and polyketide synthase (PKS) of Streptomyces glaucescens. Initiation of straight-chain fatty acid biosynthesis by the type II FAS involves a direct condensation of acetyl-CoA with this malonyl-ACP to generate a 3-ketobutyryl-ACP product and is catalyzed by FabH. In vitro experiments with a reconstituted type II PKS system in the absence of FabH have previously shown that the acetyl-ACP (generated by decarboxylation of malonyl-ACP), not acetyl-CoA, is used to initiate tetracenomycin C (TCM C) biosynthesis. We have shown that sgFabH activity is present in S. glaucescens fermentations during TCM C production, suggesting that it could contribute to initiation of TCM C biosynthesis in vivo. Isotope incorporation studies with [CD3]acetate and [13CD3]acetate demonstrated significant intact retention of three deuteriums into the starter unit of palmitate and complete washout of deuterium label into the starter unit of TCM C. These observations provide evidence that acetyl-CoA is not used directly as a starter unit for TCM C biosynthesis in vivo and argue against an involvement of FabH in this process. Consistent with this conclusion, assays of the purified recombinant sgFabH with acetyl-CoA demonstrated activity using malonyl-ACP generated from either FabC (the S. glaucescens FAS ACP) (k(cat) 42.2 min(-1), K(m) 4.5 +/- 0.3 microM) or AcpP (the E. coli FAS ACP) (k(cat) 7.5 min(-1), K(m) 6.3 +/- 0.3 microM) but not TcmM (the S. glaucescens PKS ACP). In contrast, the sgFabD which catalyzes conversion of malonyl-CoA to malonyl-ACP for fatty acid biosynthesis was shown to be active with TcmM (k(cat) 150 min(-1), K(m) 12.2 +/- 1.2 microM), AcpP (k(cat) 141 min(-1), K(m) 13.2 +/- 1.6 microM), and FabC (k(cat) 560 min(-1), K(m) 12.7 +/- 2.6 microM). This enzyme was shown to be present during TCM C production and could play a role in generating malonyl-ACP for both processes. Previous demonstrations that the purified PKS ACPs catalyze self-malonylation and that a FabD activity is not required for polyketide biosynthesis are shown to be an artifact of the expression and purification protocols. The relaxed ACP specificity of FabD and the lack of a clear alternative are consistent with a role of FabD in providing malonyl-ACP precursors for PKS as well as FAS processes. In contrast, the ACP specificity of FabH, isotope labeling studies, and a demonstrated alternative mechanism for initiation of the PKS process provide unequivocal evidence that FabH is involved only in the FAS process.     

Fatty acid composition of Simonsiella strains

Gas-liquid chromatography of methyl esters of bound fatty acids extracted from the cells of 48 Simonsiella strains showed that these aerobic, gliding, multicellular-filamentous bacteria have fatty acid profiles of the pattern considered typical of Gramnegative eubacteria. All strains contained predominantly tetradecanoic acid (29.5%), 9-hexadecenoic acid (22.2%), an unidentified acid with an equivalent chain length of approximately 20 carbon atoms (15.8%), and dodecanoic acid (11.4%).Discriminant analysis of the mean relative percentages of 12 fatty acids correctly assigned 94% of the strains to groups based on their source of origin (i.e., the oral cavities of sheep, cat, human or dog); the relative amounts of only 3 of the fatty acids (9-octadecenoic acid, hexadecanoic acid, and tetradecanoic acid) provided most of this discrimination.     

A functional gene array for detection of bacterial virulence elements

Emerging known and unknown pathogens create profound threats to public health. Platforms for rapid detection and characterization of microbial agents are critically needed to prevent and respond to disease outbreaks. Available detection technologies cannot provide broad functional information about known or novel organisms. As a step toward developing such a system, we have produced and tested a series of high-density functional gene arrays to detect elements of virulence and antibiotic resistance mechanisms. Our first generation array targets genes from Escherichia coli strains K12 and CFT073, Enterococcus faecalis and Staphylococcus aureus. We determined optimal probe design parameters for gene family detection and discrimination. When tested with organisms at varying phylogenetic distances from the four target strains, the array detected orthologs for the majority of targeted gene families present in bacteria belonging to the same taxonomic family. In combination with whole-genome amplification, the array detects femtogram concentrations of purified DNA, either spiked in to an aerosol sample background, or in combinations from one or more of the four target organisms. This is the first report of a high density NimbleGen microarray system targeting microbial antibiotic resistance and virulence mechanisms. By targeting virulence gene families as well as genes unique to specific biothreat agents, these arrays will provide important data about the pathogenic potential and drug resistance profiles of unknown organisms in environmental samples.     

Purification and characterization of lysozyme from plasma of the eastern oyster (Crassostrea virginica)

Lysozyme was purified from the plasma of eastern oysters (Crassostrea virginica) using a combination of ion exchange and gel filtration chromatographies. The molecular mass of purified lysozyme was estimated at 18.4 kDa by SDS-PAGE, and its isoelectric point was greater than 10. Mass spectrometric analysis of the purified enzyme revealed a high-sequence homology with i-type lysozymes. No similarity was found however between the N-terminal sequence of oyster plasma lysozyme and N-terminal sequences of other i-type lysozymes, suggesting that the N-terminal sequences of the i-type lysozymes may vary to a greater extent between species than reported in earlier studies. The optimal ionic strength, pH, cation concentrations, sea salt concentrations, and temperature for activity of the purified lysozyme were determined, as well as its temperature and pH stability. Purified oyster plasma lysozyme inhibited the growth of Gram-positive bacteria (e.g., Lactococcus garvieae, Enterococcus sp.) and Gram-negative bacteria (e.g., Escherichia coli, Vibrio vulnificus). This is a first report of a lysozyme purified from an oyster species and from the plasma of a bivalve mollusc.