Cryopreservation of somatic embryos of the herbaceous peony (Paeonia lactiflora Pall.) by air drying

This study was carried out to establish a suitable method for the cryopreservation of somatic embryos of the herbaceous peony. The somatic embryos were obtained from cotyledon and anther cultures on a MS medium supplemented with abscisic acid (ABA) and phenylacetic acid (PAA), respectively. The frequency of somatic embryo formation was the greatest (61%) from the cotyledons cultured on a MS medium supplemented with 1.0 mg l(-1) of ABA. Embryos were also obtained directly from anthers cultured on a MS medium with or without 2.0 mg l(-1) of PAA. For the cryopreservation of peony somatic embryos, the embryos were dried under a stream of sterile air and frozen by immersion in liquid nitrogen. Thawed embryos were germinated into plantlets after placing on a medium containing 0.3 mg l(-1) of gibberellic acid (GA(3)). The frequency of the post-thaw regrowth of cryopreserved somatic embryos was related to their size and desiccation time, the latter ranging from 0 to 2 h. When the somatic embryos were desiccated for 1 h, the frequency of post-thaw regrowth was greater than 66%. The frequency of post-thaw regrowth of the cryopreserved somatic embryos from anthers and cotyledon tissues was generally high when they were 2-3 mm in size. Desiccation may be a suitable method for the cryopreservation of somatic embryos of the herbaceous peony.     

The influential factor of narcolepsy on quality of life: compared to obstructive sleep apnea with somnolence or insomnia

Sleep and Biological Rhythms - Narcoleptics tend to have a low quality of life (QoL). Few studies have compared QoL in narcolepsy against other sleep disorders. The purpose of this study was to...     

Feedback control of adrenal steroidogenesis via H2O2-dependent, reversible inactivation of peroxiredoxin III in mitochondria

Certain members of the peroxiredoxin (Prx) family undergo inactivation through hyperoxidation of the catalytic cysteine to sulfinic acid during catalysis and are reactivated by sulfiredoxin; however, the physiological significance of this reversible regulatory process is unclear. We now show that PrxIII in mouse adrenal cortex is inactivated by H(2)O(2) produced by cytochrome P450 enzymes during corticosterone production stimulated by adrenocorticotropic hormone. Inactivation of PrxIII triggers a sequence of events including accumulation of H(2)O(2), activation of p38 mitogen-activated protein kinase, suppression of steroidogenic acute regulatory protein synthesis, and inhibition of steroidogenesis. Interestingly, levels of inactivated PrxIII, activated p38, and sulfiredoxin display circadian oscillations. Steroidogenic tissue-specific ablation of sulfiredoxin in mice resulted in the persistent accumulation of inactive PrxIII and suppression of the adrenal circadian rhythm of corticosterone production. The coupling of CYP11B1 activity to PrxIII inactivation provides a feedback regulatory mechanism for steroidogenesis that functions independently of the hypothalamic-pituitary-adrenal axis.     

Neural interface with a silicon neural probe in the advancement of microtechnology

In this paper we describe the status of a silicon-based microelectrode for neural recording and an advanced neural interface. We have developed a silicon neural probe, using a combination of plasma and wet etching techniques. This process enables the probe thickness to be controlled precisely. To enhance the CMOS compatibility in the fabrication process, we investigated the feasibility of the site material of the doped polycrystalline silicon with small grains of around 50 nm in size. This silicon electrode demonstrated a favorable performance with respect to impedance spectra, surface topography and acute neural recording. These results showed that the silicon neural probe can be used as an advanced microelectrode for neurological applications.     

SUMO-specific protease SUSP4 positively regulates p53 by promoting Mdm2 self-ubiquitination

The p53 tumour suppressor has a key role in the control of cell growth and differentiation, and in the maintenance of genome integrity. p53 is kept labile under normal conditions, but in response to stresses, such as DNA damage, it accumulates in the nucleus for induction of cell-cycle arrest, DNA repair or apoptosis. Mdm2 is an ubiquitin ligase that promotes p53 ubiquitination and degradation. Mdm2 is also self-ubiquitinated and degraded. Here, we identified a novel cascade for the increase in p53 level in response to DNA damage. A new SUMO-specific protease, SUSP4, removed SUMO-1 from Mdm2 and this desumoylation led to promotion of Mdm2 self-ubiquitination, resulting in p53 stabilization. Moreover, SUSP4 competed with p53 for binding to Mdm2, also resulting in p53 stabilization. Overexpression of SUSP4 inhibited cell growth, whereas knockdown of susp4 by RNA interference (RNAi) promoted of cell growth. UV damage induced SUSP4 expression, leading to an increase in p53 levels in parallel with a decrease in Mdm2 levels. These findings establish a new mechanism for the elevation of cellular p53 levels in response to UV damage.     

On-line estimation of cell growth from agitation speed in DO-stat culture of a filamentous microorganism,Agaricus blazei

A simple, but effective on-line method for estimating the mycelial cell mass concentration from agitation speed data, a most readily-available process variable, has been developed for DO-stat cultures ofAgaricus blazei. The dynamic change of dissolved oxygen concentration (DOC) in the initial transient period and the change in yield were considered in the development of the estimation algorithm or estimator. Parameters in the estimation algorithm were calculated from the agitation speed data at 20% of DOC. The proposed estimator could accurately predict the cell mass concentration regardless of DOC levels in the tested range of 10–40%, showing a good extrapolation capability.     

Photocurable biodegradable liquid copolymers: synthesis of acrylate-end-capped trimethylene carbonate-based prepolymers, photocuring, and hydrolysis

Various photocurable liquid biodegradable trimethylene carbonate (TMC)-based (co)oligomers were prepared by ring-opening (co)polymerization of TMC with or without L-lactide (LL) using low molecular weight poly(ethylene glycol) (PEG) (mol wt 200, 600, or 1000) or trimethylolpropane (TMP) as an initiator. Resultant (co)oligomers were pastes, viscous liquids, or liquids at room temperature, depending on the monomer composition and monomer/initiator ratio. Liquid (co)oligomers were subsequently end-capped with acrylate groups. Upon visible-light irradiation in the presence of camphorquinone as a radical generator, rapid liquid-to-solid transformation occurred to produce photocured solid. The photocuring yield increased with photoirradiation time, photointensity, and camphorquinone concentration. The photocured polymers derived from low molecular weight PEG (PEG200) and TMP exhibited much reduced hydrolysis potential compared with PEG1000-derived polymers in terms of weight loss, water uptake, and swelling depth. Force-distance curve measurements by nanoindentation using atomic force microscopy clearly showed that Young's moduli of the photocured polymer films decreased with increasing hydrolysis time. Their potential biomedical applications are discussed.     

Anticancer activity of paroxetine in human colon cancer cells: Involvement of MET and ERBB3

The concept of drug repositioning has recently received considerable attention in the field of oncology. In the present study, we propose that paroxetine can be used as a potent anticancer drug. Paroxetine, one of the selective serotonin reuptake inhibitors (SSRIs), has been widely prescribed for the treatment of depression and anxiety disorders. Recently, SSRIs have been reported to have anticancer activity in various types of cancer cells; however, the underlying mechanisms of their action are not yet known. In this study, we investigated the potential anticancer effect of paroxetine in human colorectal cancer cells, HCT116 and HT‐29. Treatment with paroxetine reduced cell viability, which was associated with marked increase in apoptosis, in both the cell lines. Also, paroxetine effectively inhibited colony formation and 3D spheroid formation. We speculated that the mode of action of paroxetine might be through the inhibition of two major receptor tyrosine kinases – MET and ERBB3 – leading to the suppression of AKT, ERK and p38 activation and induction of JNK and caspase‐3 pathways. Moreover, in vivo experiments revealed that treatment of athymic nude mice bearing HT‐29 cells with paroxetine remarkably suppressed tumour growth. In conclusion, paroxetine is a potential therapeutic option for patients with colorectal cancer.     

Diversity of bacterial community in freshwater of Woopo wetland

Diversity of bacterial community in water layer of Woopo wetland was investigated. Cultivable bacterial strains were isolated by the standard dilution plating technique and culture-independent 16S rRNA gene clones were obtained directly from DNA extracts of a water sample. Amplified rDNA restriction analysis (ARDRA) was applied onto both of the isolates and 16S rRNA gene clones. Rarefaction curves, coverage rate and diversity indices of ARDRA patterns were calculated. Representative isolates and clones of all the single isolate/clone phylotype were partially sequenced and analyzed phylogenetically. Sixty-four and 125 phylotypes were obtained from 203 bacterial isolates and 235 culture-independent 16S rRNA gene clones, respectively. Bacterial isolates were composed of 4 phyla, of which Firmicutes (49.8%) and Actinobacteria (32.0%) were predominant. Isolates were affiliated with 58 species. Culture-independent 16S rRNA gene clones were composed of 8 phyla, of which Proteobacteria (62.2%), Actinobacteria (15.5%), and Bacteroidetes (13.7%) were predominant. Diversity of 16S rRNA gene clones originated from cultivation-independent DNA extracts was higher than that of isolated bacteria.     

Modeling and Design of H-Infinity Controller for Piezoelectric Actuator LIPCA

<正> We proposed a dynamic model identification and design of an H-Infinity (i.e.H_∞) controller using a LightweightPiezo-Composite Actuator (LIPCA).A second-order dynamic model was obtained by using input and output data, and applyingan identification algorithm.The identified model coincides well with the real LIPCA.To reduce the resonating mode that istypical of piezoelectric actuators, a notch filter was used.A feedback controller using the H_∞ control scheme was designed basedon the identified dynamic model; thus, the LIPCA can be easily used as an actuator for biomemetic applications such as artificialmuscles or macro/micro positioning in bioengineering.The control algorithm was implemented using a microprocessor, analogfilters, and power amplifying drivers.Our simulation and experimental results demonstrate that the proposed control algorithmworks well in real environment, providing robust performance and stability with uncertain disturbances.