Qualitative and quantitative analyses of the decomposition products that arise from the exposure of thymine to monochromatic ultrasoft X rays and 60Co gamma rays in the solid state

HPLC analyses of condensed thymine irradiated with monochromatic synchrotron ultrasoft X rays in the energy region around nitrogen and oxygen K-shell edges were performed. Cobalt-60 gamma rays were used as a reference radiation. The radiation chemical dose response of each separated thymine decomposition product was also determined. Uracil (U), 5-(hydroxymethyl)uracil (HMU), 5,6-dihydrothymine (DHT), 5-formyluracil (foU) and four main unknown products were found in the HPLC chromatogram of the sample irradiated with ultrasoft X rays in vacuo. Similar spectra of the products were also found in the gamma-ray experiment; however, some unknown products that appeared after elution of the thymine peak were significantly larger than those in the ultrasoft X- ray experiment. This result indicates the difference in radiation quality. The G value of DHT produced by gamma radiation was 10 times larger than those produced by the ultrasoft X- ray photons with energies of 395 and 407 eV corresponding to below and on the nitrogen K-shell edge, respectively. This result suggests that the differences in the photon energy and/ or in the energy spectra of the secondary electron between ultrasoft X rays and gamma rays are causing differences in the process of the radiation chemistry. Moreover, the yields of all the thymine decomposition products induced by 538 eV photons (oxygen K-shell edge) were significantly smaller than those induced by photons around the nitrogen K-shell edge. The K-shell excitation of oxygen in thymine may efficiently promote the production of small thymine fragments susceptible to desorption from the sample.     

Rapid sexing of bovine preimplantation embryos using loop-mediated isothermal amplification

Loop-mediated isothermal amplification (LAMP) is a novel DNA amplification method that amplifies a target sequence specifically under isothermal conditions. The product of LAMP is detected by the turbidity of the reaction mixture without electrophoresis. The objective of this study was to develop a rapid sexing method for bovine preimplantation embryos using LAMP. The first experiment was conducted to optimize the DNA extraction method for LAMP-based embryo sexing. The DNA of single blastomeres was extracted using three methods: heat, NaOH, and proteinase K-Tween 20 (PK-TW) treatments. Sexing was performed with two LAMP reactions, male-specific and male-female common reaction, after DNA extraction. The rates of correct determination of sex were 88.9-94.4%, with no difference among methods. The sensitivity and accuracy of LAMP-based embryo sexing were evaluated in the next experiment. The proportion of samples in which the sex was correctly determined was 75-100% for one to five biopsied cells. Lastly, in vivo-derived embryos were examined to verify the usefulness of LAMP-based embryo sexing, and some of these fresh, sexed embryos were transferred into recipient animals. The time needed for sexing was <1 h. The pregnancy rate was 57.4% and all calves born were of the predicted sex (12 male and 21 female). Therefore, LAMP-based embryo sexing accurately determined gender and is suitable for field application.     

Atresia ani with diphallus and separate scrota in a calf: a case report

Atresia ani, a common genetic defect in animals, is often accompanied by urogenital defects in calves. This paper reports a case of atresia ani with diphallus and separate scrota in a calf. The calf was born with atresia ani; surgery (to open the anus) was performed 3 days after birth. No urogenital abnormalities were noticed until 4 months after birth. At that time, two separate scrota (each containing a testis) and a sac-like structure in the middle of two scrota, were visible. The gait was abnormal, with abduction of the hind limbs while walking. Additionally, the hind legs appeared wider than usual at the hip joints. Two weeks later, two peni (diphallia) was observed, each in a separate preputial sheath. The calf had a normal karyotype on cytogenetic examination. Plasma concentrations of testosterone at 5.5, 6, and 7 months of age were 3.5, 1.9, and 1.7 ng/ml, respectively. At necropsy (7 months of age), the prepuce was thick and the glans of the right penis was adhered to the prepuce. The left penis did not have a urethra or retractor penis muscles. The sac-like structure in the middle of the two scrota contained the urinary bladder and a loop of small intestine. The pubic bone had failed to fuse at the pelvic symphysis. In conclusion, this is the first reported case of atresia ani with diphallus, separate scrota, and pubic bone separation in a calf.     

Effect of nematodes on rhizosphere colonization by seed-applied bacteria

There is much interest in the use of seed-applied bacteria for biocontrol and biofertilization, and several commercial products are available. However, many attempts to use this strategy fail because the seed-applied bacteria do not colonize the rhizosphere. Mechanisms of rhizosphere colonization may involve active bacterial movement or passive transport by percolating water or plant roots. Transport by other soil biota is likely to occur, but this area has not been well studied. We hypothesized that interactions with soil nematodes may enhance colonization. To test this hypothesis, a series of microcosm experiments was carried out using two contrasting soils maintained under well-defined physical conditions where transport by mass water flow could not occur. Seed-applied Pseudomonas fluorescens SBW25 was capable of rhizosphere colonization at matric potentials of -10 and -40 kPa in soil without nematodes, but colonization levels were substantially increased by the presence of nematodes. Our results suggest that nematodes can have an important role in rhizosphere colonization by bacteria in soil.     

Cloning, nucleotide sequence, and overexpression of the L-rhamnose isomerase gene from Pseudomonas stutzeri in Escherichia coli

The gene encoding L-rhamnose isomerase (L-RhI) from Pseudomonas stutzeri was cloned into Escherichia coli and sequenced. A sequence analysis of the DNA responsible for the L-RhI gene revealed an open reading frame of 1,290 bp coding for a protein of 430 amino acid residues with a predicted molecular mass of 46,946 Da. A comparison of the deduced amino acid sequence with sequences in relevant databases indicated that no significant homology has previously been identified. An amino acid sequence alignment, however, suggested that the residues involved in the active site of L-RhI from E. coli are conserved in that from P. stutzeri. The L-RhI gene was then overexpressed in E. coli cells under the control of the T5 promoter. The recombinant clone, E. coli JM109, produced significant levels of L-RhI activity, with a specific activity of 140 U/mg and a volumetric yield of 20,000 U of soluble enzyme per liter of medium. This reflected a 20-fold increase in the volumetric yield compared to the value for the intrinsic yield. The recombinant L-RhI protein was purified to apparent homogeneity on the basis of three-step chromatography. The purified recombinant enzyme showed a single band with an estimated molecular weight of 42,000 in a sodium dodecyl sulfate-polyacrylamide gel. The overall enzymatic properties of the purified recombinant L-RhI protein were the same as those of the authentic one, as the optimal activity was measured at 60 degrees C within a broad pH range from 5.0 to 11.0, with an optimum at pH 9.0.     

Measurements of mouse pulmonary artery biomechanics

BACKGROUND: Robust techniques for characterizing the biomechanical properties of mouse pulmonary arteries will permit exciting gene-level hypotheses regarding pulmonary vascular disease to be tested in genetically engineered animals. In this paper, we present the first measurements of the biomechanical properties of mouse pulmonary arteries. METHOD OF APPROACH: In an isolated vessel perfusion system, transmural pressure, internal diameter and wall thickness were measured during inflation and deflation of mouse pulmonary arteries over low (5-40 mmHg) and high (10-120 mmHg) pressure ranges representing physiological pressures in the pulmonary and systemic circulations, respectively. RESULTS: During inflation, circumferential stress versus strain showed the nonlinear "J"-shape typical of arteries. Hudetz's incremental elastic modulus ranged from 27 +/- 13 kPa (n = 7) during low-pressure inflation to 2,700 +/- 1,700 kPa (n = 9) during high-pressure inflation. The low and high-pressure testing protocols yielded quantitatively indistinguishable stress-strain and modulus-strain results. Histology performed to assess the state of the tissue after mechanical testing showed intact medial and adventitial architecture with some loss of endothelium, suggesting that smooth muscle cell contractile strength could also be measured with these techniques. CONCLUSIONS: The measurement techniques described demonstrate the feasibility of quantifying mouse pulmonary artery biomechanical properties. Stress-strain behavior and incremental modulus values are presented for normal, healthy arteries over a wide pressure range. These techniques will be useful for investigations into biomechanical abnormalities in pulmonary vascular disease.     

The clinical biochemistry of obesity

Obesity is essentially an excessive accumulation of triacylglycerols in fatty tissue that is the net result of excessive energy intake compared to energy usage. Severe forms of the disease are most likely to have a predominantly genetic basis and this is probably polygenic. The 'thrifty gene' hypothesis also describes the disturbance that a modern environment, including higher energy intake and decreased physical activity, has on otherwise advantageous genetic variations. While the physical consequences of obesity, such as arthritis, are debilitating and costly, the metabolic consequences are the drivers behind the modern epidemics of insulin resistance, diabetes, fatty liver disease, coronary artery disease, hypertension and polycystic ovary syndrome. The pathophysiological mechanisms behind these diseases are probably a combination of the toxic metabolic effects of free fatty acids and adipokines - the numerous messengers that adipose tissue has been discovered to produce.