Regulation of locomotion and cell-cell contact area by the LFA-1 and ICAM-1 adhesion receptors.

We demonstrate complementary differences in the behavior of B lymphoblastoid cells adhering to LFA-1 or its counter-receptor ICAM-1. The interaction of B lymphoblastoid cells with glass-supported planar bilayers bearing LFA-1 or ICAM-1 was observed by time-lapse video microscopy, and the distribution of adhesion receptors on cells interacting with the planar bilayers was studied by immunofluorescence microscopy. B lymphoblasts formed a large contact area and crawled rapidly (up to 25 microns/min) on planar bilayers bearing ICAM-1. In contrast, these cells attached to planar bilayers bearing LFA-1 through a fixed point about which the cells actively pivoted, using a single stalk-like projection. Phorbol ester-stimulated lymphoblasts, which adhere more strongly to ICAM-1-bearing substrates than unstimulated lymphoblasts, were still capable of locomotion on ICAM-1. Phorbol ester stimulation of B lymphoblasts on planar bilayers bearing LFA-1 promoted a rapid conversion from "stalk" attachment to symmetrical spreading of the cell on the substrate. Cellular LFA-1 remained uniformly distributed on the cell surface during interaction with bilayers bearing purified ICAM-1 as determined by immunofluorescence. In contrast, ICAM-1 was concentrated in the stalk-like structure through which the unstimulated B lymphoblasts adhered to LFA-1 in planar bilayers, but ICAM-1 immunofluorescence became more uniformly distributed over the cell surface within minutes of phorbol ester addition. Neither LFA-1 or ICAM-1 colocalized with the prominent staining of filamentous actin in the ruffling membrane regions. Interaction through cell surface LFA-1 and ICAM-1, 2, or 3 promotes different cellular morphologies and behaviors, the correlation of which with previously observed patterns of lymphocyte interaction with different cell types is discussed.     

Mapping of the calpain proteolysis products of the junctional foot protein of the skeletal muscle triad junction

Summary The Ca²⁺ activated neutral protease calpain II in a concentration-dependent manner sequentially degrades the Junctional foot protein (JFP) of rabbit skeletal muscle triad junctions in either the triad membrane or as the pure protein. This progression is inhibited by calmodulin. Calpain initially cleaves the 565 kDa JFP monomer into peptides of 160 and 410 kDa, which is subsequently cleaved to 70 and 340 kDa. The 340 kDa peptide is finally cleaved to 140 and 200 kDa or its further products. When the JFP was labeled in the triad membrane with the hydrophobic probe 3-(trifuoromethyl) 3-(m) [¹²⁵I]iodophenyl diazirine and then isolated and proteolysed with calpain II, the [¹²⁵I] was traced from the 565 kDa parent to M _r, 410 kDa and then to 340 kDa, implying that these large fragments contain the majority of the transmembrane segments. A 70-kDa frament was also labeled with the hydrophobic probe, although weakly suggesting an additional transmembrane segment in the middle of the molecule. These transmembrane segments have been predicted to be in the C-terminal region of the JFP. Using an ALOM program, we also predict that transmembrane segments may exist in the 70 kDa fragment. The JFP has eight PEDST sequences; this finding together with the calmodulin inhibition of calpain imply that the JFP is a PEDST-type calpain substrate. Calpain usually cleaves such substrates at or near calmodulin binding sites. Assuming such sites for proteolysis, we propose that the fragments of the JFP correspond to the monomer sequence in the following order from the N-terminus: 160, 70, 140 and 200 kDa. For this model, new calmodulin sequences are predicted to exist near 160 and 225 kDa from the N-terminus. When the intact JFP was labeled with azidoATP, label appeared in the 160 and 140 kDa fragments, which according to the above model contain the GXGXXG sequences postulated as ATP binding sites. This transmembrane segment was predicted by the ALOM program. In addition, calpain and calpastatin activities remained associated with triad component organelles throughout their isolation. These findings and the existence of PEDST sequences suggest that the JFP is normally degraded by calpain in vivo and that degradation is regulated by calpastatin and calmodulin     

Plasmodium falciparum-infected erythrocytes bind ICAM-1 at a site distinct from LFA-1, Mac-1, and human rhinovirus.

The attachment of erythrocytes infected with P. falciparum to human venular endothelium is the primary step leading to complications from severe and cerebral malaria. Intercellular adhesion molecule-1 (ICAM-1, CD54) has been implicated as a cytoadhesion receptor for P. falciparum-infected erythrocytes. Characterization of domain deletion, human/murine chimeric ICAM-1 molecules, and amino acid substitution mutants localized the primary binding site for parasitized erythrocytes to the first amino-terminal immunoglobulin-like domain of ICAM-1. The ICAM-1 binding site is distinct from those recognized by LFA-1, Mac-1, and the human major-type rhinoviruses. Synthetic peptides encompassing the binding site on ICAM-1 inhibited malaria-infected erythrocyte adhesion to ICAM-1-coated surfaces with a Ki of 0.1-0.3 mM, whereas the Ki for soluble ICAM-1 is 0.15 microM. These findings have implications for the therapeutic reversal of malaria-infected erythrocyte sequestration in the host microvasculature.     

Construction and characterisation of a yeast artificial chromosome library containing three haploid maize genome equivalents

We have constructed a yeast artificial chromosome (YAC) library using high-molecular-weight DNA prepared from agarose-embedded leaf protoplasts of the maize inbred line UE95. This library contains 79 000 clones with an average insert size of 145 kb and should therefore represent approximately three haploid genome equivalents. The library is organised as an ordered array in duplicate microtitre plates. Forty-one pools of DNA from 1920 individual clones have been prepared for rapid screening of the library by the polymerase chain reaction (PCR). Using this approach, together with conventional colony hybridisation, we have been able to identify between one and eight positive clones for every probe used.     

A rapid procedure for the construction of PCR cDNA libraries from small amounts of plant tissue

We describe a general method for the preparation of λZAP II cDNA libraries from very small amounts (<50 mg) of plant tissue. We have achieved this by combining an efficient method for RNA extraction with a modified PCR protocol for the synthesis and amplification of cDNA. Using this protocol we have found it possible to generate cDNA libraries containing more than 10⁶ clones from as little as 1 μg of total RNA.     

Stage-specific cuticular proteins of Ostertagia circumcincta and Ostertagia ostertagi

In this study we have shown that NHS-biotin and I¹²⁵-streptavidin can detect cuticular polypeptides of Ostertagia spp. The labelled polypeptide profile of intact nematodes is simple compared to the profile obtained by labelling homogenates. None of the major internal polypeptides are labelled and the subset of proteins labelled in intact nematodes appears to be mainly surface associated. The results presented here demonstrate that NHS-biotin may be used as a reagent for the analysis of surface polypeptides. The surface polypeptide profiles of the five major developmental stages (L1, L2, L3, L4 and adult) of Ostertagia circumcincta show a series of stage-specific molecules with no polypeptides common to all stages, indicating that the cuticle is a dynamic structure which changes throughout the life cycle. Similarity comparison of Ostertagia ostertagi L3 and L4 stage surface profiles showed that each stage is clearly distinct; comparison of these stages between the two species shows an overall similarity.     

Crystallographic analysis of a complex between human immunodeficiency virus type 1 protease and acetyl-pepstatin at 2.0-A resolution

The mode of binding of acetyl-pepstatin to the protease from the human immunodeficiency virus type 1 (HIV-1) has been determined by x-ray diffraction analysis. Crystals of an acetyl-pepstatin-HIV-1 protease complex were obtained in space group P2(1)2(1)2 (unit cell dimensions a = 58.39 A, b = 86.70 A, c = 46.27 A) by precipitation with sodium chloride. The structure was phased by molecular replacement methods, and a model for the structure was refined using diffraction data to 2.0 A resolution (R = 0.176 for 12901 reflections with I greater than sigma (I); deviation of bond distances from ideal values = 0.018 A; 172 solvent molecules included). The structure of the protein in the complex has been compared with the structure of the enzyme without the ligand. A core of 44 amino acids in each monomer, including residues in the active site and residues at the dimer interface, remains unchanged on binding of the inhibitor (root mean square deviation of alpha carbon positions = 0.39 A). The remaining 55 residues in each monomer undergo substantial rearrangement, with the most dramatic changes occurring at residues 44-57 (these residues comprise the so-called flaps of the enzyme). The flaps interact with one another and with the inhibitor so as to largely preserve the 2-fold symmetry of the protein. The inhibitor is bound in two approximately symmetric orientations. In both orientations the peptidyl backbone of the inhibitor is extended; a network of hydrogen bonds is formed between the inhibitor and the main body of the protein as well as between the inhibitor and the flaps. Hydrophobic side chains of residues in the body of the protein form partial binding sites for the side chains of the inhibitor; hydrophobic side chains of residues in the flaps complete these binding sites.     

Use of two-dimensional thin-layer chromatography for the components study of poly(adenosine diphosphate ribose)

Two-dimensional thin-layer chromatography on cellulose plates has been used for separating and quantifying the three adenosine derivatives: AMP, phosphoribosyl AMP (PRAMP), and (PR)2AMP obtained by venom phosphodiesterase digestion of poly(ADP-ribose). In vitro synthesized polymer, up to 300 derivatives in length were studied. Some parameters of the complexity of poly(ADP-ribose) could be deduced from our results: (i) The first branching point appears in fragments of approximately 21 derivatives in length. (ii) The branching points are located at regular distances of approximately 41 derivatives from each other.