Fine mapping and allelic dosage effect of <Emphasis Type="Italic">Hwc1</Emphasis>, a complementary hybrid weakness gene in rice

Hybrid weakness is a reproductive barrier that is found in many plant species. In rice, the hybrid weakness caused by two complementary genes, Hwc1 and Hwc2, has been surveyed intensively. However, their gene products and the molecular mechanism that causes hybrid weakness have remained unknown. We performed linkage analyses of Hwc1, narrowed down the area of interest to 60 kb, and identified eight candidate genes. In the F(2) population, in which both Hwc1 and Hwc2 genes were segregated, plants were separable into four classes according to their respective phenotypes: severe type, semi-severe type, F(1) type, and normal type. Severe type plants show such severe symptoms that they could produce only tiny shoot-like structures; they were unable to generate roots. Genetic analyses using closely linked DNA markers of the two genes showed that the symptoms of the F(2) plants were explainable by the genotypes of Hwc1 and Hwc2. Weakness was observed in plants that have both Hwc1 and Hwc2. In Hwc1 homozygote, the symptoms worsened and severe type or semi-severe type plants appeared. Consequently, Hwc1 should have a gene dosage effect and be a semi-dominant gene. The dosage effect of Hwc2 was recognizable, but it was not so severe as that in Hwc1. These results are useful to elucidate the mechanism that causes the hybrid weakness phenomenon and the role of each causal gene in hybrid weakness.     

Bone regeneration during distraction osteogenesis: mechano-regulation by shear strain and fluid velocity

Corroboration of mechano-regulation algorithms is difficult, partly because repeatable experimental outcomes under a controlled mechanical environment are necessary, but rarely available. In distraction osteogenesis (DO), a controlled displacement is used to regenerate large volumes of new bone, with predictable and reproducible outcomes, allowing to computationally study the potential mechanisms that stimulate bone formation. We hypothesized that mechano-regulation by octahedral shear strain and fluid velocity can predict the spatial and temporal tissue distributions seen during experimental DO. Variations in predicted tissue distributions due to alterations in distraction rate and frequency could then also be studied. An in vivo ovine tibia experiment evaluating bone-segment transport (distraction, 1 mm/day) over an intramedullary nail was used for comparison. A 2D axisymmetric finite element model, with a geometry originating from the experimental data, was created and included into a previously developed model of tissue differentiation. Cells migrated and proliferated into the callus, differentiating into fibroblasts, chondrocytes or osteoblasts, dependent on the biophysical stimuli. Matrix production was modelled with an osmotic swelling model to allow tissues to grow at individual rates. The temporal and spatial tissue distributions predicted by the computational model agreed well with those seen experimentally. In addition, it was observed that decreased distraction rate (0.5 mm/d vs. 0.25 mm/d) increased the overall time needed for complete bone regeneration, whereas increased distraction frequency (0.5 mm/12 h vs. 0.25 mm/6 h) stimulated faster bone regeneration, as found in experimental findings by others. Thus, the algorithm regulated by octahedral shear strain and fluid velocity was able to predict the bone regeneration patterns dependent on distraction rate and frequency during DO.     

La autoantigen translocates to cytoplasm after cleavage during granzyme B-mediated cytotoxicity

Our recent report demonstrated that apoptosis-specific autoantibodies against granzyme B-induced cleavage fragments of SS-B (La) were found in the sera from patients with primary Sj?gren's syndrome. The objective of this study was identified by the intracellular redistribution of La autoantigen during granzyme B-induced apoptosis. We developed green fluorescence protein (GFP)-La and GFP-LaDelta220 (generation of granzyme B-specific cleavage of La protein) fusion proteins. GFP-La protein was localized in the nucleus, whereas the GFP-LaDelta220 protein predominantly existed in the cytoplasm in transformed A293T cells. Nuclear GFP-La protein was translocated to cytoplasm after granzyme B enriched YT cells incubation. La protein in human salivary grand HSG cells is cleaved and translocated from the nucleus to the cytoplasm after YT cell co-cultivation. These results suggest that La protein is cleaved by granzyme B and N-terminal La fragment (27 kD) translocated to the cytoplasm, thus leading to a novel autoantibody production during granzyme B-mediated cytotoxicity.     

Development of an apparatus for rapid release of oligosaccharides at the glycosaminoglycan-protein linkage region in chondroitin sulfate-type proteoglycans

An apparatus, AutoGlycoCutter (AGC), was developed as a tool for rapid release of O-linked-type glycans under alkaline conditions. This system allowed rapid release of oligosaccharides at the glycosaminoglycan-protein linkage region in proteoglycans (PGs). After digestion of PGs with chondroitinase ABC, the oligosaccharides at the linkage region were successfully released from the protein core by AGC within 3 min. The reducing ends of the released oligosaccharides were labeled with 2-aminobenzoic acid and analyzed by a combination of capillary electrophoresis (CE) and matrix-assisted laser desorption time-of-flight mass spectrometry. In addition, the unsaturated disaccharides produced by chondroitinase ABC derived from the outer parts of the glycans were labeled with 2-aminoacridone and analyzed by CE to determine the disaccharide compositions. We evaluated AGC as a method for structural analysis of glycosaminoglycans in some chondroitin-sulfate-type PGs (urinary trypsin inhibitor, bovine nasal cartilage PG, bovine aggrecan, bovine decorin, and bovine biglycan). Recoveries of the released oligosaccharides were 57-73% for all PGs tested in the present study. In particular, we emphasize that the use of AGC achieved ca. 1000-fold rapid release of O-glycans compared with the conventional method.     

Mechanistic studies on the intramolecular one-electron transfer between the two flavins in the human endothelial NOS reductase domain

The object of this study was to clarify the mechanism of electron transfer in the human endothelial nitric oxide synthase (eNOS) reductase domain using recombinant eNOS reductase domains; the FAD/NADPH domain containing FAD- and NADPH-binding sites and the FAD/FMN domain containing FAD/NADPH-, FMN-, and a calmodulin-binding sites. In the presence of molecular oxygen or menadione, the reduced FAD/NADPH domain is oxidized via the neutral (blue) semiquinone (FADH(*)), which has a characteristic absorption peak at 520 nm. The FAD/NADPH and FAD/FMN domains have high activity for ferricyanide, but the FAD/FMN domain has low activity for cytochrome c. In the presence or absence of calcium/calmodulin (Ca(2+)/CaM), reduction of the oxidized flavins (FAD-FMN) and air-stable semiquinone (FAD-FMNH(*)) with NADPH occurred in at least two phases in the absorbance change at 457nm. In the presence of Ca(2+)/CaM, the reduction rate of both phases was significantly increased. In contrast, an absorbance change at 596nm gradually increased in two phases, but the rate of the fast phase was decreased by approximately 50% of that in the presence of Ca(2+)/CaM. The air-stable semiquinone form was rapidly reduced by NADPH, but a significant absorbance change at 520 nm was not observed. These findings indicate that the conversion of FADH(2)-FMNH(*) to FADH(*)-FMNH(2) is unfavorable. Reduction of the FAD moiety is activated by CaM, but the formation rate of the active intermediate, FADH(*)-FMNH(2) is extremely low. These events could cause a lowering of enzyme activity in the catalytic cycle.     

Stereoselective hexobarbital 3'-hydroxylation by CYP2C19 expressed in yeast cells and the roles of amino acid residues at positions 300 and 476

We examined the enzymatic function of recombinant CYP2C19 in enantiomeric hexobarbital (HB) 3'-hydroxylation, and searched the roles of amino acid residues, such as Phe-100, Phe-114, Asp-293, Glu-300, and Phe-476 of CYP2C19 in the stereoselective HB 3'-hydroxylation, using a yeast cell expression system and site-directed mutagenesis method. CYP2C19 wild-type exerted substrate enantioselectivity of (R)-HB>(S)-HB and metabolite diastereoselectivity of 3'(R)<3'(S) in 3'-hydroxylation of HB enantiomers. The substitution of Asp-293 by alanine failed to yield an observable peak at 450 nm in its reduced carbon monoxide-difference spectrum. CYP2C19-E300A and CYP2C19-E300V with alanine and valine, respectively, in place of Glu-300 exerted total HB 3'-hydroxylation activities of 45 and 108%, respectively, that of the wild-type. Interestingly, these two mutants showed substrate enantioselectivity of (R)-HB<(S)-HB, which is opposite to that of the wild-type, while metabolite diasteroselectivity remained unchanged. The replacement of Phe-476 by alanine increased total HB 3'-hydroxylation activity to approximately 3-fold that of the wild-type. Particularly, 3'(S)-OH-(S)-HB-forming activity elevated to 7-fold that of the wild-type, resulting in the reversal of the substrate enantioselectivity. In contrast, the substitution of phenylalanine at positions 100 and 114 by alanine did not produce a remarkable change in the total activity or the substrate enantioselectivity. These results indicate that Glu-300 and Phe-476 are important in stereoselective oxidation of HB enantiomers by CYP2C19.     

Physical size of the <Emphasis Type="Italic">S</Emphasis> locus region defined by genetic recombination and genome sequencing in <Emphasis Type="Italic">Ipomoea trifida</Emphasis>, Convolvulaceae

Sporophytic self-incompatibility (SSI) in the genus Ipomoea (Convolvulaceae) is controlled by a single polymorphic S locus. We have previously analyzed genomic sequences of an approximately 300 kb region spanning the S locus of the S ₁ haplotype and characterized the genomic structure around this locus. Here, we further define the physical size of the S locus region by mapping recombination breakpoints, based on sequence analysis of PCR fragments amplified from the genomic DNA of recombinants. From the recombination analysis, the S locus of the S ₁ haplotype was delimited to a 0.23 cM region of the linkage map, which corresponds to a maximum physical size of 212 kb. To analyze differences in genomic organization between S haplotypes, fosmid contigs spanning approximately 67 kb of the S ₁₀ haplotype were sequenced. Comparison with the S ₁ genomic sequence revealed that the S haplotype-specific divergent regions (SDRs) spanned 50.7 and 34.5 kb in the S ₁ and S ₁₀ haplotypes, respectively and that their flanking regions showed a high sequence similarity. In the sequenced region of the S ₁₀ haplotype, five of the 12 predicted open reading frames (ORFs) were found to be located in the divergent region and showed co-linear organization of genes between the two S haplotypes. Based on the size of the SDRs, the physical size of the S locus was estimated to fall within the range 34–50 kb in Ipomoea.     

Redox-active cellulose Langmuir-Blodgett films containing beta-carotene as a molecular wire

Redox-active Langmuir-Blodgett (LB) films containing dihydrophytyl ferrocenoate (DFc) and beta-carotene (betaC) were fabricated by use of 6-O-dihydrophytylcellulose (DHPC) as a matrix. A mixture of DFc-DHPC formed a stable monolayer. Atomic force microscopy images revealed that the DFc molecules were dispersed uniformly throughout the surface in the ratio DFc:DHPC = 2:8 at 30 mN m-1. The DFc-DHPC monolayer was transferred successfully onto a substrate, yielding Y-type LB films. Cyclic voltammograms for the DFc-DHPC LB films on an indium tin oxide (ITO) electrode exhibited a well-defined surface wave. The voltammograms of the DFc-DHPC LB films exhibited 60-40% redox-active ferrocene moieties, whereas those of the DFc-DHPC-betaC LB films exhibited 90-70%. X-ray diffraction patterns indicated that the distance between layers was independent of betaC molecules incorporated into the LB films. Consequently, these results suggested that betaC can function as a molecular wire.