Selective cleavage of the connector segments within the myosin-S1 heavy chain by staphylococcal protease

The existence of the two connector segments linking the tryptic 50 kDa fragment of skeletal S1 heavy chain to the adjacent 27 kDa and 20 kDa peptides was ascertained by digestion of S1 with staphylococcal protease which was found to act specifically at these particular regions. Three new peptides of Mr 28000, 48000 and 22000 were produced and the novel S1 derivative formed had an intact actin-activated ATPase activity. Amino acid sequence analyses indicated that the 48 kDa and 22 kDa peptides overlap the two connector elements.     

Transient kinetics of adenosine 5'-triphosphate hydrolysis by covalently cross-linked actomyosin complex in water and 40% ethylene glycol by the rapid flow quench method

The initial steps of the ATPase of covalently cross-linked actomyosin subfragment 1 (acto-SF-1) were studied by the rapid flow quench method, and the results obtained were compared with those with reversible (i.e., non-cross-linked) acto-SF-1 and SF-1 under identical conditions. Cross-linked acto-SF-1 plus [gamma-32P]ATP reaction mixture milliseconds old was quenched either in a large excess of unlabeled ATP (ATP chase) or in acid (Pi burst). The conditions were pH 8 and 15 degrees C at 5 mM or 0.15 M KCl and with or without 40% ethylene glycol. In 40% ethylene glycol (5 mM KCl), as with SF-1 and reversible acto-SF-1, the ATP chase was used to titrate active sites and to study the kinetics of ATP binding. Unlike those with SF-1 or reversible acto-SF-1, saturation kinetics were not obtained. The second-order rate constant for ATP binding was 3.1 X 10(6) M-1 s-1 for cross-linked acto-SF-1, 1.8 X 10(6) M-1 s-1 for reversible acto-SF-1, and 2 X 10(6) M-1 s-1 for SF-1. In Pi burst experiments, a transient phase could not be discerned. Because of a high kcat, cross-linked acto-SF-1 was difficult to study in aqueous solution, but at 5 mM KCl, the ATP chase and Pi burst curves were similar to those obtained in 40% ethylene glycol. At 0.15 M KCl the ATP chase curve was difficult to interpret (small amplitude), and there was a small Pi burst.(ABSTRACT TRUNCATED AT 250 WORDS)     

The Histopathological Reactions of Vigna sinensis to Separate and Concomitant Parasitism by Meloidogyne javanica and Rotylenchulus reniformis

Cellular alterations in cowpea roots and nodules induced by single and concomitant Meloidogyne javanica and Rotylenchulus reniformis were investigated. M. javanica induced giant cells inside the vascular bundles of roots and nodules, and syncytia in cortical tissue of the nodules. In contrast, R. reniformis stimulated hypertrophy of pericycle and endodermal cells of the roots and nodules. Syncytia induced in the roots involved a sheet of pericycle cells and an endodermal cell. Cortical ceils of nodules also responded to R. reniformis infection, initiating wall gaps that led to syncytial formation. Coincidence of giant cells or syncytla of both nematodes was observed either in one vascular bundle or in separate ones. The histopathology of roots and nitrogen nodules infected by the two species remained unique even when they were feeding in close proximity. R. reniformis induced characteristic syncytia and M. javanica induced giant cells.     

Amino acid sequence of a cyanogen bromide fragment containing the two tryptophanyl residues of lobster arginine kinase (Homarus vulgaris).

Lobster arginine kinase [EC 2.7.3.3] contains 2 tryptophanyl residues and 9 methionyl residues. The whole carboxymethylated protein was first subjected to CNBr cleavage and the resulting fragments were isolated by gel filtration and other experimental approaches. One fragment, CB5, which contains 60 residues including the two tryptophanyl residues and two of the five cysteinyl residues of the protein, was characterized and the results are reported inthis paper. The overall strategy for the establishment of the complete sequence of this fragment was based on the use of three types of peptides: (a) whole cyanogen bromide peptide CB5 which was partially characterized by automatic Edman degradation using a sequencer: 42 steps were performed out of 60 residues, (b) tryptic peptides of CB5, (c) peptides formed by cleavage of S-carboxymethylated arginine kinase (whole protein) at the two tryptophanyl residues with BNPS-skatole. The complete amino acid sequence of the CNBr polypeptide (CB5) which contains the two tryptophanyl residues of the whole protein was established.     

Imaging coronary artery microstructure using second-harmonic and two-photon fluorescence microscopy

The microstructural basis for the mechanical properties of blood vessels has not been directly determined because of the lack of a nondestructive method that yields a three-dimensional view of these vascular wall constituents. Here, we demonstrate that multiphoton microscopy can be used to visualize the microstructural basis of blood vessel mechanical properties, by combining mechanical testing (distension) of excised porcine coronary arteries with simultaneous two-photon excited fluorescence and second-harmonic generation microscopy. Our results show that second-harmonic generation signals derived from collagen can be spectrally isolated from elastin and smooth muscle cell two-photon fluorescence. Two-photon fluorescence signals can be further characterized by emission maxima at 495 nm and 520 nm, corresponding to elastin and cellular contributions, respectively. Two-dimensional reconstructions of spectrally fused images permit high-resolution visualization of collagen and elastin fibrils and smooth muscle cells from intima to adventitia. These structural features are confirmed by coregistration of multiphoton microscopy images with conventional histology. Significant changes in mean fibril thickness and overall wall dimension were observed when comparing no load (zero transmural pressure) and zero-stress conditions to 30 and 180 mmHg distension pressures. Overall, these data suggest that multiphoton microscopy is a highly sensitive and promising technique for studying the morphometric properties of the microstructure of the blood vessel wall.     

A new method to denude the endothelium without damage to media: structural, functional, and biomechanical validation

The intimial thickening that occurs in human and animal atherogenesis can be induced by mechanical injury to the endothelium. The objective of the present study was to develop a new method to induce arterial endothelial injury without damage to the media for future investigations of mechanisms of intimal thickening and atherogenesis. A specifically designed catheter was inserted into the common femoral artery of Wistar rats (n = 9) through an arteriotomic mouth. After application of Tyrode solution containing 0.14 M KCl on the surface of the vessel, the vessel contracted onto the catheter. The catheter was then moved back and forth to scrape away the endothelium. The left common femoral artery of the same rat was subjected to the standard balloon injury model. The two models were evaluated structurally, functionally, and biomechanically. Structurally, we verified that both techniques remove the endothelium, but the balloon method damages the media. Functionally, we examined the contractile response of the artery to [K+] and norepinephrine 2 days after the denudation. We found that the right femoral artery underwent contraction in response to [K+], whereas the left artery did not. Furthermore, neither artery responded to norepinephrine. Biomechanically, we measured the pressure-diameter relationship and the zero-stress state of the vessel and computed the stress-strain relation. The circumferential stretch ratios at 120 mmHg were 1.38 +/- 0.08 for the control, 1.41 +/- 0.08 (P > 0.05) for the new method, and 1.56 +/- 0.09 for the balloon injury (P < 0.05). The opening angles at the zero-stress state were 113 +/- 21 degrees for the control, 102 +/- 18 degrees for the new method (P > 0.05), and 8 +/- 13 degrees for the balloon injury (P < 0.001). In conclusion, the new method removes the endothelium while maintaining the structure, contractile function, and biomechanical properties of the vessel.     

Functional hierarchy of coronary circulation: direct evidence of a structure-function relation

The heart muscle is nourished by a complex system of blood vessels that make up the coronary circulation. Here we show that the design of the coronary circulation has a functional hierarchy. A full anatomic model of the coronary arterial tree, containing millions of blood vessels down to the capillary vessels, was simulated based on previously measured porcine morphometric data. A network analysis of blood flow through every vessel segment was carried out based on the laws of fluid mechanics and appropriate boundary conditions. Our results show an abrupt change in cross-sectional area that demarcates the transition from epicardial (EPCA) to intramyocardial (IMCA) coronary arteries. Furthermore, a similar pattern of blood flow was observed with a corresponding transition from EPCA to IMCA. These results suggest functional differences between the two types of vessels. An additional abrupt change occurs in the IMCA in relation to flow velocity. The velocity is fairly uniform proximal to these vessels but drops significantly distal to those vessels toward the capillary branches. This finding suggests functional differences between large and small IMCA. Collectively, these observations suggest a novel functional hierarchy of the coronary vascular tree and provide direct evidence of a structure-function relation.     

Analysis of blood flow in the entire coronary arterial tree

A hemodynamic analysis of coronary blood flow must be based on the measured branching pattern and vascular geometry of the coronary vasculature. We recently developed a computer reconstruction of the entire coronary arterial tree of the porcine heart based on previously measured morphometric data. In the present study, we carried out an analysis of blood flow distribution through a network of millions of vessels that includes the entire coronary arterial tree down to the first capillary branch. The pressure and flow are computed throughout the coronary arterial tree based on conservation of mass and momentum and appropriate pressure boundary conditions. We found a power law relationship between the diameter and flow of each vessel branch. The exponent is approximately 2.2, which deviates from Murray's prediction of 3.0. Furthermore, we found the total arterial equivalent resistance to be 0.93, 0.77, and 1.28 mmHg.ml(-1).s(-1).g(-1) for the right coronary artery, left anterior descending coronary artery, and left circumflex artery, respectively. The significance of the present study is that it yields a predictive model that incorporates some of the factors controlling coronary blood flow. The model of normal hearts will serve as a physiological reference state. Pathological states can then be studied in relation to changes in model parameters that alter coronary perfusion.     

The interaction of skeletal myosin subfragment 1 with the polyanion, heparin

The association between chymotryptic skeletal muscle myosin subfragment 1 (S1) and the polyanion, heparin, was investigated as an experimental approach in probing the functional importance of the cationic sites on S1 and their involvement in ionic interactions within the myosin head during energy transduction. The direct binding of heparin, used at micromolar concentrations, and its influence on the structural and functional properties of S1 were followed by gel chromatography, electron microscopy, chemical cross-linking techniques and limited digestion studies. 1. The limited tryptic digestion of S1 showed that the presence of heparin, as well as of the homopolymer, poly-(L-glutamic acid) causes a specific structural change in the 50-kDa heavy chain region of S1 and accelerates the breakdown of this segment into a 45-kDa species by a proteolytic cleavage restricted to its COOH-terminal portion. Under similar experimental conditions, the binding of MgATP and MgADP to S1 led also to the 50-kDa----45-kDa conversion, suggesting that the S1-nucleotide interactions exhibit some resemblances to the polyanion-S1 binding of polyanionic ligands to S1. This particular area is adjacent to the actin site containing the 45-kDa and 20-kDa segments of the S1 heavy chain. On the other hand, the polyanions as well as nucleotides induced changes in the interface between the heavy chain and the alkali light chains. 2. Moreover, the binding of heparin to S1 resulted in the self-association of the enzyme and the production of stable small S1 oligomers, most likely dimers, which were demonstrated by the alteration of the size of the S1 particles examined by electron microscopy and their freezing by chemical cross-linking agents. These findings are relevant to the recently reported property of skeletal chymotryptic S1 to form dimers under convenient ionic conditions, in particular in the presence of Mg-nucleotides. The interaction of cationic sites on S1 and possibly on the 50-kDa region of the heavy chain with polyanions promotes the dimerization of the S1 molecules. The binding of S1 to F-actin abolished S1 aggregation.