Factors Affecting the Development of Clostridium botulinum in Whole Milk

This study was undertaken to determine the effect of the sterilization process and the age of the medium at the time of inoculation on the development of Clostridium botulinum type 62A. Whole milk was autoclaved at 121 C for 18 or 30 min and inoculated with C. botulinum so as to contain 2,000 to 5,000 spores per milliliter. No effort was made to remove dissolved oxygen or to reduce the oxidation-reduction (O/R) potential of the medium by adding sodium thioglycolate. A 3- and a 5-day-old medium were used to study the influence of aging. Eh determinations were made periodically on inoculated and uninoculated samples. Culture development was followed by use of an oval tube counting procedure. The technique used to sterilize the milk influenced the initial O/R potential as well as the autoreductive capacity of the medium. The initial Eh of whole milk sterilized in 500-ml volumes for 18 min was 234 mv. In milk sterilized for 30 min it was 192 mv. The lag phase was 7 days in the former and 5 days in the latter. The exponential growth phases were similar. Autoreduction occurred in sterilized milk. The Eh of uninoculated milk sterilized for 18 min decreased 45 mv in 6 days. In milk sterilized for 30 min the decrease was 63 mv. In milk inoculated 3 or 5 days after sterilization the lag phase was shorter than when the medium was inoculated within 2 hr after autoclaving, regardless of the sterilization procedure employed. The autoreductive property of sterilized whole milk plays a major role in the development of C. botulinum type 62A.     

Open-Face, Epoxy Embedding of Single Cells for Ultrathin Sections

Intact stamens of Tradescantia were fixed, dehydrated, and infiltrated with an epoxy resin. Each stamen was then put into a drop of resin on a microscope slide, which was transferred to the stage of a dissecting microscope so that individual hairs could be detached from the filament with fine tungsten needles. The detached hairs were transferred to drops of resin ca. 2 mm in diameter (6 or 7 in each of two rows) lying on a slide heavily coated with evaporated carbon. Polymerization was carried out in an oven until the resin attained a degree of viscosity that permitted orientation of the isolated hairs (by using a compound microscope) without their subsequent dislocation. When the small drops of resin had hardened after further polymerization, the positions of the hairs were marked by circumscribing the cells with India ink. The block was pried from the slide after rapid cooling with solid CO₂, and was then trimmed and sectioned. Cells suspended in culture medium were embedded in much the same way; they were centrifuged to obtain a pellet, which was fixed, dehydrated, and infiltrated. A small fragment of the pellet with a little resin was placed on a microscope slide, where the cells were dissociated under a dissecting microscope at ca. 100 × magnification. Individual cells were then picked up with tungsten needles and transferred to droplets of resin on a carbon-coated slide. The subsequent steps were similar to those described for the staminate hairs. Pieces of tissue in the 50-500 μ range were also handled by the foregoing technique. However, after infiltration they were put into large drops of resin on a slide coated with silicone mold-release rather than on a surface coated with carbon.     

Two DNA polymerases may be required for synthesis of the lagging DNA strand of simian virus 40

Agents discriminating between DNA polymerase alpha and DNA polymerases of class delta (polymerase delta or epsilon) were used to characterize steps in the synthesis of the lagging DNA strand of simian virus 40 during DNA replication in isolated nuclei. The synthesis of lagging-strand intermediates below 40 nucleotides, termed DNA primers (T. Nethanel, S. Reisfeld, G. Dinter-Gottlieb, and G. Kaufmann, J. Virol. 62:2867-2873, 1988), was selectively inhibited by butylphenyl dGTP or by neutralizing DNA polymerase alpha monoclonal antibodies. The synthesis of longer lagging chains of up to 250 nucleotides (Okazaki pieces) was affected to a lesser extent, possibly indirectly, by these agents. Aphidicolin, which inhibits both alpha- and delta-class enzymes, elicited the opposite pattern: DNA primers accumulated in its presence and were not converted into Okazaki pieces. These and previous data suggest that DNA polymerase alpha primase synthesizes DNA primers, whereas another DNA polymerase, presumably DNA polymerase delta or epsilon, mediates the conversion of DNA primers into Okazaki pieces.     

Simultaneous immunoelectron microscopic visualization of protein B23 and C23 distribution in the HeLa cell nucleolus

The intranucleolar distribution of phosphoproteins B23 and C23 was visualized simultaneously by post-embedding immunoelectron microscopy in HeLa cell nucleoli, using specific antibodies. The data show that proteins B23 and C23 co-localize to the same nucleolar compartments, i.e., the dense fibrillar component and the granular component. Neither of the two antibodies is significantly associated with the fibrillar centers in these cells, although the fibrillar centers appear positive after silver staining. These findings suggest that other unidentified components must be responsible for the silver staining observed in the fibrillar centers of interphase nucleoli. The results are discussed in the light of previously reported data obtained by preembedding immunolabeling techniques and by silver staining, which both suggested a localization of protein C23 inside the fibrillar centers.     

Probing actin and liposome interaction of talin and talin-vinculin complexes: a kinetic, thermodynamic and lipid labeling study.

Talin purified from human platelets and chicken gizzard smooth muscle is an actin and lipid binding protein. Here, we have investigated the effect of vinculin on (a) talin-nucleated actin polymerization and (b) insertion of talin into lipid bilayers. Calorimetric data show ternary complex formation between talin, vinculin, and actin. Actin-talin, actin-vinculin and actin-(talin-vinculin) binding and rate constants as well as actin polymerization rates for all three protein species have been determined by steady state titration, stopped-flow, and fluorescence assay. In contrast to an increase of the polymerization rate by a factor of less than 2 for actin-talin and actin-(talin-vinculin) when lowering the temperature, we measured a decrease in rates for actin alone and actin-vinculin. The overall equilibrium constants (Keq) in the van't Hoff plot proved linear and were of one-step reactions. Thermodynamic data exhibited signs of van der Waal's binding forces. Using the photoactivatable lipid analogue [3H]PTPC/11, which selectively labels membrane-embedded hydrophobic domains of proteins, we also show that talin partially inserts into the hydrophobic bilayer of liposomes. This insertion occurs in a similar manner irrespective of preincubation with vinculin.     

Cloning of Choriocarcinoma Cells Shows That Invasion Correlates with Expression and Activation of Gelatinase A

Implantation and placental development are dependent upon trophoblast invasion of the endometrium. While the villous trophoblast does not display invasive behavior, the extravillous cytotrophoblast is highly invasive. By cloning BeWo choriocarcinoma cells, we have isolated two distinct clones that share similarities with villous and extravillous cytotrophoblasts. When cultured at the surface of a type I collagen gel, BeWo MC-1 cells were not invasive, whereas BeWo MC-2 cells rapidly invaded this matrix. When injected subcutaneously in nude mice, BeWo MC-1 cells developed a localized tumor and BeWo MC-2 cells developed larger tumors with micrometastases. Gelatinase A expression and minute amounts of gelatinase B were detected in the parental cell line and in both clones. However, the parental and the BeWo MC-2 cells secreted 5- to 10-fold more gelatinase A than the BeWo MC-1 cells. Laminin and matrigel stimulated the production of gelatinase A in BeWo MC-2 cells. Type I collagen promoted the conversion of the 72-kDa progelatinase A in an active enzyme only in parental BeWo and in BeWo MC-2 cells. These clones provide an interesting model for studying the complex mechanisms regulating implantation as well as the controlled invasiveness during implantation compared to tumor invasion.     

DNA polymerase epsilon may be dispensable for SV40- but not cellular-DNA replication.

The contributions of DNA polymerases alpha, delta, and epsilon to SV40 and nuclear DNA syntheses were evaluated. Proteins were UV-crosslinked to nascent DNA within replicating chromosomes and the photolabelled polymerases were immunopurified. Only DNA polymerases alpha and delta were detectably photolabelled by nascent SV40 DNA, whether synthesized in soluble viral chromatin or within nuclei isolated from SV40-infected cells. In contrast, all three enzymes were photolabelled by the nascent cellular DNA. Mitogenic stimulation enhanced the photolabelling of the polymerases in the alpha>delta>epsilon order of preference. The data agree with the notion that DNA polymerases alpha and delta catalyse the principal DNA polymerisation reactions at the replication fork of SV40 and, perhaps, also of nuclear chromosomes. DNA polymerase epsilon, implicated by others as a cell-cycle checkpoint regulator sensing DNA replication lesions, may be dispensable for replication of the small, fast propagating virus that subverts cell cycle controls.