Membrane dynamics of γ‐secretase with the anterior pharynx‐defective 1B subunit

The four‐subunit protease complex γ‐secretase cleaves many single‐pass transmembrane (TM) substrates, including Notch and β‐amyloid precursor protein to generate amyloid‐β (Aβ), central to Alzheimer's disease. Two of the subunits anterior pharynx‐defective 1 (APH‐1) and presenilin (PS) exist in two homologous forms APH1‐A and APH1‐B, and PS1 and PS2. The consequences of these variations are poorly understood and could affect Aβ production and γ‐secretase medicine. Here, we developed the first complete structural model of the APH‐1B subunit using the published cryo‐electron microscopy (cryo‐EM) structures of APH1‐A (Protein Data Bank: 5FN2, 5A63, and 6IYC). We then performed all‐atom molecular dynamics simulations at 303 K in a realistic bilayer system to understand both APH‐1B alone and in γ‐secretase without and with substrate C83‐bound. We show that APH‐1B adopts a 7TM topology with a water channel topology similar to APH‐1A. We demonstrate direct transport of water through this channel, mainly via Glu84, Arg87, His170, and His196. The apo and holo states closely resemble the experimental cryo‐EM structures with APH‐1A, however with subtle differences: The substrate‐bound APH‐1B γ‐secretase was quite stable, but some TM helices of PS1 and APH‐1B rearranged in the membrane consistent with the disorder seen in the cryo‐EM data. This produces different accessibility of water molecules for the catalytic aspartates of PS1, critical for Aβ production. In particular, we find that the typical distance between the catalytic aspartates of PS1 and the C83 cleavage sites are shorter in APH‐1B, that is, it represents a more closed state, due to interactions with the C‐terminal fragment of PS1. Our structural‐dynamic model of APH‐1B alone and in γ‐secretase suggests generally similar topology but some notable differences in water accessibility which may be relevant to the protein's existence in two forms and their specific function and location.     

Phenotypes of non-attached Pseudomonas aeruginosa aggregates resemble surface attached biofilm

For a chronic infection to be established, bacteria must be able to cope with hostile conditions such as low iron levels, oxidative stress, and clearance by the host defense, as well as antibiotic treatment. It is generally accepted that biofilm formation facilitates tolerance to these adverse conditions. However, microscopic investigations of samples isolated from sites of chronic infections seem to suggest that some bacteria do not need to be attached to surfaces in order to establish chronic infections. In this study we employed scanning electron microscopy, confocal laser scanning microscopy, RT-PCR as well as traditional culturing techniques to study the properties of Pseudomonas aeruginosa aggregates. We found that non-attached aggregates from stationary-phase cultures have comparable growth rates to surface attached biofilms. The growth rate estimations indicated that, independently of age, both aggregates and flow-cell biofilm had the same slow growth rate as a stationary phase shaking cultures. Internal structures of the aggregates matrix components and their capacity to survive otherwise lethal treatments with antibiotics (referred to as tolerance) and resistance to phagocytes were also found to be strikingly similar to flow-cell biofilms. Our data indicate that the tolerance of both biofilms and non-attached aggregates towards antibiotics is reversible by physical disruption. We provide evidence that the antibiotic tolerance is likely to be dependent on both the physiological states of the aggregates and particular matrix components. Bacterial surface-attachment and subsequent biofilm formation are considered hallmarks of the capacity of microbes to cause persistent infections. We have observed non-attached aggregates in the lungs of cystic fibrosis patients; otitis media; soft tissue fillers and non-healing wounds, and we propose that aggregated cells exhibit enhanced survival in the hostile host environment, compared with non-aggregated bacterial populations.     

Phylogenetic distribution of intron positions in alpha-amylase genes of bilateria suggests numerous gains and losses

Most eukaryotes have at least some genes interrupted by introns. While it is well accepted that introns were already present at moderate density in the last eukaryote common ancestor, the conspicuous diversity of intron density among genomes suggests a complex evolutionary history, with marked differences between phyla. The question of the rates of intron gains and loss in the course of evolution and factors influencing them remains controversial. We have investigated a single gene family, alpha-amylase, in 55 species covering a variety of animal phyla. Comparison of intron positions across phyla suggests a complex history, with a likely ancestral intronless gene undergoing frequent intron loss and gain, leading to extant intron/exon structures that are highly variable, even among species from the same phylum. Because introns are known to play no regulatory role in this gene and there is no alternative splicing, the structural differences may be interpreted more easily: intron positions, sizes, losses or gains may be more likely related to factors linked to splicing mechanisms and requirements, and to recognition of introns and exons, or to more extrinsic factors, such as life cycle and population size. We have shown that intron losses outnumbered gains in recent periods, but that "resets" of intron positions occurred at the origin of several phyla, including vertebrates. Rates of gain and loss appear to be positively correlated. No phase preference was found. We also found evidence for parallel gains and for intron sliding. Presence of introns at given positions was correlated to a strong protosplice consensus sequence AG/G, which was much weaker in the absence of intron. In contrast, recent intron insertions were not associated with a specific sequence. In animal Amy genes, population size and generation time seem to have played only minor roles in shaping gene structures.     

Novel Miscanthus hybrids: Modelling productivity on marginal land in Europe using dynamics of canopy development determined by light interception

New biomass crop hybrids for bioeconomic expansion require yield projections to determine their potential for strategic land use planning in the face of global challenges. Our biomass growth simulation incorporates radiation interception and conversion efficiency. Models often use leaf area to predict interception which is demanding to determine accurately, so instead we use low-cost rapid light interception measurements using a simple laboratory-made line ceptometer and relate the dynamics of canopy closure to thermal time, and to measurements of biomass. We apply the model to project the European biomass potentials of new market-ready hybrids for 2020–2030. Field measurements are easier to collect, the calibration is seasonally dynamic and reduces influence of weather variation between field sites. The model obtained is conservative, being calibrated by crops of varying establishment and varying maturity on less productive (marginal) land. This results in conservative projections of miscanthus hybrids for 2020–2030 based on 10% land use conversion of the least (productive) grassland and arable for farm diversification, which show a European potential of 80.7–89.7 Mt year⁻¹ biomass, with potential for 1.2–1.3 EJ year⁻¹ energy and 36.3–40.3 Mt year⁻¹ carbon capture, with seeded Miscanthus sacchariflorus × sinensis displaying highest yield potential. Simulated biomass projections must be viewed in light of the field measurements on less productive land with high soil water deficits. We are attempting to model the results from an ambitious and novel project combining new hybrids across Europe with agronomy which has not been perfected on less productive sites. Nevertheless, at the time of energy sourcing issues, seed-propagated miscanthus hybrids for the upscaled provision of bioenergy offer an alternative source of renewable energy. If European countries provide incentives for growers to invest, seeded hybrids can improve product availability and biomass yields over the current commercial miscanthus variety.     

Rice Resistance to Brown Spot Mediated by Nitrogen and Potassium

This study was undertaken to investigate the effects of both nitrogen (N) and potassium (K) rates on rice resistance to brown spot, caused by the fungus Bipolaris oryzae. Rice plants (cultivar ‘Metica 1’) were grown in soil corrected with 0, 25, 50, 75 and 100 mg of N / kg (as NH₄NO₃) of soil as well as with 25, 50, 75, 125 and 150 mg of K / kg (as KCl) of soil. Thirty‐three‐day‐old plants were inoculated with a suspension of Bipolaris oryzae conidia and the incubation period (IP), number of lesions (NL) per cm² of leaf area and disease severity was evaluated. Disease severity was scored at 24, 48, 72, 96, 120 and 144 h after inoculation and data were used to obtain the area under brown spot progress curve (AUBSPC). Soil plant analysis development (SPAD) index, plant dry weight and concentration of N and K in leaf tissues were also determined for both non‐inoculated (NI) and inoculated (IN) plants. Concentration of N in leaf tissue increased as the N rates in the soil increased. Concentration of K in leaf tissue increased sharply as the K rates in the soil increased for both NI and IN plants. Concentration of K in leaf tissue was not affected by N rates. The IP increased as the N rates increased, but was somewhat less impacted by increasing K rates. The NL decreased as the N rates increased. The NL dramatically declined at the highest K rates. The AUBSPC dramatically declined as the N and K rates in the soil increased. SPAD index values increased as the N and K rates in the soil increased for both NI and IN plants. Plant dry weight increased as the N and K rates in the soil increased for both NI and IN plants. Results from this study suggest that combining high N and K rates may contribute to reducing the intensity of brown spot in rice while improving plant development.     

Uprooting and Burial of Invasive Alien Plants: A New Tool in Coastal Restoration?

Invasive alien plants are a problem for conservation management, and control of these species can be combined with habitat restoration. Subsoil burial of uprooted plants is a new method of mechanical control, which might be suitable in disturbed habitats. The method was tested in Rosa rugosa (Japanese Rose), an invasive shrub in north‐western Europe with negative effects on coastal biodiversity. Two months after uprooting and burial in dunes of north‐eastern Denmark, 89% of the 58 shrubs resprouted from roots and rhizomes; on average 41 resprouts per shrub. Resprout density was twice as high at former shrub margins compared with the center; resprouts were taller and originated from more superficial soil layers at the margin than in the center. Resprouting was negatively correlated with fragment depth, and no resprouts were observed from greater than 15 cm depth. The number of resprouts increased with fragment dry mass (0.5–168.5 g). After 18 months with harrowing the species was still resprouting, flowering, and fruiting, albeit with no difference between shrub margin and center. Resprouts were taller (26 cm) and coverage was higher (0–4%) after two compared with three times harrowing, whereas no difference was found in cover of native dune species (1–5%). The results show that even small fragments of R. rugosa resprout, and that resprouting persists despite repeated harrowing. Thus, careful subsoil burial of all fragments is necessary, special attention should be paid to the shrub margin, and follow‐up treatments are needed. The effectiveness of the burial method is discussed for restoration of coastal dunes.