Productivity of a doubled haploid winter wheat population under heat stress

Breeding of new winter wheat cultivars with good heat tolerance requires better understanding of the genetic background of heat tolerance. In the present work the effect of heat stress on the 6^th day after heading was investigated in a doubled haploid (DH) population arising from a cross between heat-sensitive (Plainsman V) and heat-tolerant (Mv Magma) cultivars. Averaged over the population, heat stress was found to result in a significant reduction in biomass, grain yield and grain number per plant, and in thousand-kernel weight (TKW) and harvest index. High temperature had the greatest effect on the grain yield, with a drop of 36.2% compared with the control. This could be attributed jointly to significant reductions in the TKW of the main ear and in the grain number of the side tillers. The relationship between the yield parameters was confirmed by the positive correlations obtained for the lines in the population. The diverse levels of heat tolerance in the different lines were confirmed by the significant differences in the reduction in the chlorophyll content (SPAD index) of the flag-leaves and in yield parameters. The changes in yield components in stress condition, however, can be still the most effective tools for heat stress evaluation.     

Effects of ambient temperature in association with photoperiod on phenology and on the expressions of major plant developmental genes in wheat (Triticum aestivum L.)

In addition to its role in vernalization, temperature is an important environmental stimulus in determining plant growth and development. We used factorial combinations of two photoperiods (16H, 12H) and three temperature levels (11, 18 and 25 °C) to study the temperature responses of 19 wheat cultivars with established genetic relationships. Temperature produced more significant effects on plant development than photoperiod, with strong genotypic components. Wheat genotypes with PPD‐D1 photoperiod sensitive allele were sensitive to temperature; their development was delayed by higher temperature, which intensified under non‐inductive conditions. The effect of temperature on plant development was not proportional; it influenced the stem elongation to the largest extent, and warmer temperature lengthened the lag phase between the detection of first node and the beginning of intensive stem elongation. The gene expression patterns of VRN1, VRN2 and PPD1 were also significantly modified by temperature, while VRN3 was more chronologically regulated. The associations between VRN1 and VRN3 gene expression with early apex development were significant in all treatments but were only significant for later plant developmental phases under optimal conditions (16H and 18 °C). Under 16H, the magnitude of the transient peak expression of VRN2 observed at 18 and 25 °C associated with the later developmental phases.     

A consensus framework map of durum wheat (Triticum durum Desf.) suitable for linkage disequilibrium analysis and genome-wide association mapping

Background

Durum wheat (Triticum durum Desf.) is a tetraploid cereal grown in the medium to low-precipitation areas of the Mediterranean Basin, North America and South-West Asia. Genomics applications in durum wheat have the potential to boost exploitation of genetic resources and to advance understanding of the genetics of important complex traits (e.g. resilience to environmental and biotic stresses). A dense and accurate consensus map specific for T. durum will greatly facilitate genetic mapping, functional genomics and marker-assisted improvement.

Results

High quality genotypic data from six core recombinant inbred line populations were used to obtain a consensus framework map of 598 simple sequence repeats (SSR) and Diversity Array Technology^® (DArT) anchor markers (common across populations). Interpolation of unique markers from 14 maps allowed us to position a total of 2,575 markers in a consensus map of 2,463 cM. The T. durum A and B genomes were covered in their near totality based on the reference SSR hexaploid wheat map. The consensus locus order compared to those of the single component maps showed good correspondence, (average Spearman’s rank correlation rho ρ value of 0.96). Differences in marker order and local recombination rate were observed between the durum and hexaploid wheat consensus maps. The consensus map was used to carry out a whole-genome search for genetic differentiation signatures and association to heading date in a panel of 183 accessions adapted to the Mediterranean areas. Linkage disequilibrium was found to decay below the r² threshold = 0.3 within 2.20 cM, on average. Strong molecular differentiations among sub-populations were mapped to 87 chromosome regions. A genome-wide association scan for heading date from 27 field trials in the Mediterranean Basin and in Mexico yielded 50 chromosome regions with evidences of association in multiple environments.

Conclusions

The consensus map presented here was used as a reference for genetic diversity and mapping analyses in T. durum, providing nearly complete genome coverage and even marker density. Markers previously mapped in hexaploid wheat constitute a strong link between the two species. The consensus map provides the basis for high-density single nucleotide polymorphic (SNP) marker implementation in durum wheat.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-873) contains supplementary material, which is available to authorized users.     

Rising atmospheric CO<Subscript>2</Subscript> concentration may imply higher risk of <Emphasis Type="Italic">Fusarium</Emphasis> mycotoxin contamination of wheat grains

Increasing atmospheric CO₂ concentration not only has a direct impact on plants but also affects plant–pathogen interactions. Due to economic and health-related problems, special concern was given thus in the present work to the effect of elevated CO₂ (750 μmol mol^?1) level on the Fusarium culmorum infection and mycotoxin contamination of wheat. Despite the fact that disease severity was found to be not or little affected by elevated CO₂ in most varieties, as the spread of Fusarium increased only in one variety, spike grain number and/or grain weight decreased significantly at elevated CO₂ in all the varieties, indicating that Fusarium infection generally had a more dramatic impact on the grain yield at elevated CO₂ than at the ambient level. Likewise, grain deoxynivalenol (DON) content was usually considerably higher at elevated CO₂ than at the ambient level in the single-floret inoculation treatment, suggesting that the toxin content is not in direct relation to the level of Fusarium infection. In the whole-spike inoculation, DON production did not change, decreased or increased depending on the variety × experiment interaction. Cooler (18 °C) conditions delayed rachis penetration while 20 °C maximum temperature caused striking increases in the mycotoxin contents, resulting in extremely high DON values and also in a dramatic triggering of the grain zearalenone contamination at elevated CO₂. The results indicate that future environmental conditions, such as rising CO₂ levels, may increase the threat of grain mycotoxin contamination.     

FR-H3: a new QTL to assist in the development of fall-sown barley with superior low temperature tolerance

Fall-sown barley will be increasingly important in the era of climate change due to higher yield potential and efficient use of water resources. Resistance/tolerance to abiotic stresses will be critical, and foremost among the abiotic stresses is low temperature. Simultaneous gene discovery and breeding will accelerate the development of agronomically relevant fall-sown barley germplasm with resistance to low temperature. We developed two doubled haploid mapping populations using two lines from the University of Nebraska (NE) and one line from Oregon State University (OR): NB3437f/OR71 (facultative × facultative) and NB713/OR71 (winter × facultative). Both were genotyped with a custom 384 oligonucleotide pool assay (OPA). QTL analyses were performed for low temperature tolerance (LTT) and vernalization sensitivity (VS). The role of VRN-H2 in VS was confirmed and a novel alternative winter allele at VRN-H3 was discovered in the Nebraska germplasm. FR-H2 was identified as a probable determinant of LTT and a new QTL, FR-H3, was discovered on chromosome 1H that accounted for up to 48 % of the phenotypic variation in field survival at St. Paul, MN, USA. The discovery of FR-H3 is a significant advancement in barley LTT genetics and will assist in developing the next generation of fall-sown varieties.     

Effects of photo and thermo cycles on flowering time in barley: a genetical phenomics approach

The effects of synchronous photo (16 h daylength) and thermo (2 degrees C daily fluctuation) cycles on flowering time were compared with constant light and temperature treatments using two barley mapping populations derived from the facultative cultivar 'Dicktoo'. The 'Dicktoo'x'Morex' (spring) population (DM) segregates for functional differences in alleles of candidate genes for VRN-H1, VRN-H3, PPD-H1, and PPD-H2. The first two loci are associated with the vernalization response and the latter two with photoperiod sensitivity. The 'Dicktoo'x'Kompolti korai' (winter) population (DK) has a known functional polymorphism only at VRN-H2, a locus associated with vernalization sensitivity. Flowering time in both populations was accelerated when there was no fluctuating factor in the environment and was delayed to the greatest extent with the application of synchronous photo and thermo cycles. Alleles at VRN-H1, VRN-H2, PPD-H1, and PPD-H2--and their interactions--were found to be significant determinants of the increase/decrease in days to flower. Under synchronous photo and thermo cycles, plants with the Dicktoo (recessive) VRN-H1 allele flowered significantly later than those with the Kompolti korai (recessive) or Morex (dominant) VRN-H1 alleles. The Dicktoo VRN-H1 allele, together with the late-flowering allele at PPD-H1 and PPD-H2, led to the greatest delay. The application of synchronous photo and thermo cycles changed the epistatic interaction between VRN-H2 and VRN-H1: plants with Dicktoo type VRN-H1 flowered late, regardless of the allele phase at VRN-H2. Our results are novel in demonstrating the large effects of minor variations in environmental signals on flowering time: for example, a 2 degrees C thermo cycle caused a delay in flowering time of 70 d as compared to a constant temperature.     

Optimality of cell arrangement and rules of thumb of cell initiation in Polistes dominulus: a modeling approach

Possible adaptivity and mechanisms of nest construction of apaper wasp, Polistes dominulus, were studied by analyses ofnest structures and modeling. Results suggest that nests arenot built in agreement with the currently accepted "economymaterial usage" hypothesis because (1) the number of naturalforms is much less than expected under this criterion, and(2) there are non-optimal structures. Maximization of nest compactnessis a new hypothesis that better predicts natural structures.By examining the predictions of different building rules andcomparing model-generated structures to natural nests, we foundthat the nest structure provides sufficient (quantitative)information for governing the building process on (or verynear) the optimal path. We assume that non-optimal natural formsare the consequence of rules of thumb being used by wasps duringconstruction. A family of rules based on information on theage of cells was able to account for all natural forms, includingthe assumed optimal and non-optimal forms.     

Mechanical unfolding of cardiac myosin binding protein-C by atomic force microscopy

Cardiac myosin-binding protein-C (cMyBP-C) is a thick-filament-associated protein that performs regulatory and structural roles within cardiac sarcomeres. It is a member of the immunoglobulin (Ig) superfamily of proteins consisting of eight Ig- and three fibronectin (FNIII)-like domains, along with a unique regulatory sequence referred to as the M-domain, whose structure is unknown. Domains near the C-terminus of cMyBP-C bind tightly to myosin and mediate the association of cMyBP-C with thick (myosin-containing) filaments, whereas N-terminal domains, including the regulatory M-domain, bind reversibly to myosin S2 and/or actin. The ability of MyBP-C to bind to both myosin and actin raises the possibility that cMyBP-C cross-links myosin molecules within the thick filament and/or cross-links myosin and thin (actin-containing) filaments together. In either scenario, cMyBP-C could be under mechanical strain. However, the physical properties of cMyBP-C and its behavior under load are completely unknown. Here, we investigated the mechanical properties of recombinant baculovirus-expressed cMyBP-C using atomic force microscopy to assess the stability of individual cMyBP-C molecules in response to stretch. Force-extension curves showed the presence of long extensible segment(s) that became stretched before the unfolding of individual Ig and FNIII domains, which were evident as sawtooth peaks in force spectra. The forces required to unfold the Ig/FNIII domains at a stretch rate of 500 nm/s increased monotonically from ∼30 to ∼150 pN, suggesting a mechanical hierarchy among the different Ig/FNIII domains. Additional experiments using smaller recombinant proteins showed that the regulatory M-domain lacks significant secondary or tertiary structure and is likely an intrinsically disordered region of cMyBP-C. Together, these data indicate that cMyBP-C exhibits complex mechanical behavior under load and contains multiple domains with distinct mechanical properties.     

Spatially and temporally synchronized atomic force and total internal reflection fluorescence microscopy for imaging and manipulating cells and biomolecules

The atomic force microscope is a high-resolution scanning-probe instrument which has become an important tool for cellular and molecular biophysics in recent years but lacks the time resolution and functional specificities offered by fluorescence microscopic techniques. To exploit the advantages of both methods, here we developed a spatially and temporally synchronized total internal reflection fluorescence and atomic force microscope system. The instrument, which we hereby call STIRF-AFM, is a stage-scanning device in which the mechanical and optical axes are coaligned to achieve spatial synchrony. At each point of the scan the sample topography (atomic force microscope) and fluorescence (photon count or intensity) information are simultaneously recorded. The tool was tested and validated on various cellular (monolayer cells in which actin filaments and intermediate filaments were fluorescently labeled) and biomolecular (actin filaments and titin molecules) systems. We demonstrate that with the technique, correlated sample topography and fluorescence images can be recorded, soft biomolecular systems can be mechanically manipulated in a targeted fashion, and the fluorescence of mechanically stretched titin can be followed with high temporal resolution.