Monitoring the mode and tempo of concerted evolution in the Drosophila melanogaster rDNA locus

Non-LTR retrotransposons R1 and R2 have persisted in rRNA gene loci (rDNA) since the origin of arthropods despite their continued elimination by the recombinational mechanisms of concerted evolution. This study evaluated the short-term evolutionary dynamics of the rDNA locus by measuring the divergence among replicate Drosophila melanogaster lines after 400 generations. The total number of rDNA units on the X chromosome of each line varied from 140 to 310, while the fraction of units inserted with R1 and R2 retrotransposons ranged from 37 to 65%. This level of variation is comparable to that found in natural population surveys. Variation in locus size and retrotransposon load was correlated with large changes in the number of uninserted and R1-inserted units, yet the numbers of R2-inserted units were relatively unchanged. Intergenic spacer (IGS) region length variants were also used to evaluate changes in the rDNA loci. All IGS length variants present in the lines showed significant increases and decreases of copy number. These studies, combined with previous data following specific R1 and R2 insertions in these lines, help to define the type and distribution, both within the locus and within the individual units, of recombinational events that give rise to the concerted evolution of the rDNA locus.     

A combined defect in the biosynthesis of N- and O-glycans in patients with cutis laxa and neurological involvement: the biochemical characteristics

Based on our preliminary observation of abnormal glycosylation in a cutis laxa patient, nine cutis laxa patients were analyzed for congenital defects of glycosylation (CDG). Isoelectric focusing of plasma transferrin and apolipoproteinC-III showed that three out of nine patients had a defect in the biosynthesis of N-glycans and core 1 mucin type O-glycans, respectively. Mass spectrometric N-glycan analyses revealed a relative increase of glycans lacking sialic acid and glycans lacking sialic acid and galactose residues. Mutation analysis of the fibulin-5 gene (FBLN5), which has been reported in cases of autosomal recessive cutis laxa, revealed no mutations in the patients' DNA. Evidence is presented that extracellular matrix (ECM) proteins of skin are likely to be highly glycosylated with N- and/or mucin type O-glycans by using algorithms for predicting glycosylation. The conclusions in this study were that the clinical phenotype of autosomal recessive cutis laxa seen in three patients is not caused by mutations in the FBLN5 gene. Our findings define a novel form of CDG with cutis laxa and neurological involvement due to a defect in the sialylation and/or galactosylation of N- and O-glycans. Improper glycosylation of ECM proteins of skin may form the pathophysiological basis for the cutis laxa phenotype.     

Optimisation of conditions for the extraction of casearins from Casearia sylvestris using response surface methodology

Optimal conditions for the extraction of casearins from Casearia sylvestris were determined using response surface methodology. The maceration and sonication extraction techniques were performed using a 3 x 3 x 3 full factorial design including three acidity conditions, three solvents of different polarities and three extraction times. The yields and selectivities of the extraction of casearins were significantly influenced by acidity conditions. Taking into account all variables tested, the optimal conditions for maceration extraction were estimated to involve treatment with dichloromethane saturated with ammonium hydroxide for 26 h. Similar yields and selectivities for casearins were determined for sonication extraction using the same solvent but for the much shorter time of 1 h. The best results for stabilisation of the fresh plant material were obtained using leaves that had been oven dried at 40 degrees C for 48 h.     

Identification of blottin: a novel gastric trefoil factor family-2 binding protein

The trefoil factor family (TFF) peptides are important in gastro-intestinal mucosal protection and repair. Their mechanism of action remains unclear and receptors are sought. We aimed to identify and characterise proteins binding to TFF2. A fusion protein of mouse TFF2 with alkaline phosphatase was generated and used to probe 2-D protein blots of mouse stomach. The resulting spots were analysed by MS. The protein identified was characterised by bioinformatics, rapid amplification of cDNA ends, in situ hybridisation (ISH) and immunohistochemistry (IHC). Functional assays were performed in gastrointestinal cell lines. A single major murine protein was identified and named blottin. It was previously unknown as a translated product. Blottin is also present in rat and human; the latter gene is also known as GDDR. The predicted full-length proteins are 184 amino acids long (20 kDa), reducing to 164 amino acids (18 kDa) after signal peptide cleavage. ISH of gastrointestinal tissues shows abundant blottin mRNA in gastric surface and foveolar epithelium. IHC shows cytoplasmic staining for blottin protein, and by immunoelectron microscopy in mucus granules and Golgi stacks. Previous work showed that blottin is down-regulated in gastric cancers. Blottin contains a BRICHOS domain, and has 56% similarity with gastrokine-1. Cultured HT-29 cells express blottin and show increased DNA synthesis with antiblottin antibody; however, this effect is reversed by the immunising peptide. We have identified and characterised a TFF2-binding protein produced by gastric epithelium. Blottin may play a role in gastrointestinal mucosal protection and modulate gut epithelial cell proliferation.     

Anatomical and molecular characterization of Lactarius aff. omphaliformis, Russula alnijorullensis and Cortinarius tucumanensis ectomycorrhizae on Alnus acuminata

Ectomycorrhizae (ECM) of Lactarius aff. omphaliformis Romagn., Russula alnijorullensis (Sing.) Sing. and Cortinarius tucumanensis Mos. on Andean alder (Alnus acuminata Kunth) were characterized and identified. The identification of the fungal symbionts was achieved by morpho-anatomical observations of mycorrhizae and by comparison of ITS-RFLP patterns obtained from ECM and fruitbodies. L. aff omphaliformis ECM differed in some morphological details such as ramification and mantle type from ECM of the same species on A. glutinosa. L. aff omphaliformis ECM show an orange to ochre mantle containing latex cells, which stain with sulpho-vanillin, emanating hyphae without clamps. R. alnijorullensis ECM represent a typical Russula-type-ECM, light yellow to pinkish, the outer mantle being composed of triangular latex-filled cells staining with sulpho-vanillin, emanating hyphae without clamps. C. tucumanensis ECM exhibit a white (silvery) to yellowish brown mantle covered with soil particles, emanating hyphae with clamps.     

Testing the intermediate disturbance hypothesis: when will there be two peaks of diversity?

Succession after disturbances generates a mosaic of patches in different successional stages. The intermediate disturbance hypothesis predicts that intermediate disturbances lead to the highest diversity of these stages on a regional scale resulting in a hump‐shaped diversity–disturbance curve. We tested this prediction using field data of forest succession and hypothetical succession scenarios in combination with analytical and simulation models. According to our study the main factors shaping the diversity–disturbance curve and the position of the diversity maximum were the transition times between the successional stages, the transition type, neighbourhood effects and the choice of diversity measure. Although many scenarios confirmed the intermediate disturbance hypothesis we found that deviations in the form of two diversity maximums were possible. Such bimodal diversity–disturbance curves occurred when early and late successional stages were separated by one or more long‐lived (compared to the early stages) intermediate successional stages. Although the field data which met these conditions among all those tested were rare (one of six), the consequences of detecting two peaks are fundamental. The impact of disturbances on biodiversity can be complex and deviate from a hump‐shaped curve.     

Mapping changes to vegetation pattern in a restoring wetland: Finding pattern metrics that are consistent across spatial scale and time

Tidal salt marshes in the San Francisco Estuary region display heterogeneous vegetation patterns that influence wetland function and provide adequate habitat for native or endangered wildlife. In addition to analyzing the extent of vegetation, monitoring the dynamics of vegetation pattern within restoring wetlands can offer valuable information about the restoration process. Pattern metrics, derived from classified remotely sensed imagery, have been used to measure composition and configuration of patches and landscapes, but they can be unpredictable across scales, and inconsistent across time. We sought to identify pattern metrics that are consistent across spatial scale and time – and thus robust measures of vegetation and habitat configuration – for a restored tidal marsh in the San Francisco Bay, CA, USA. We used high-resolution (20 cm) remotely sensed color infrared imagery to map vegetation pattern over 2 years, and performed a multi-scale analysis of derived vegetation pattern metrics. We looked at the influence on metrics of changes in grain size through resampling and changes in minimum mapping unit (MMU) through smoothing. We examined composition, complexity, connectivity and heterogeneity metrics, focusing on perennial pickleweed (Sarcocornia pacifica), a dominant marsh plant. At our site, pickleweed patches grew larger, more irregularly shaped, and closely spaced over time, while the overall landscape became more diverse. Of the two scale factors examined, grain size was more consistent than MMU in terms of identifying relative change in composition and configuration of wetland marsh vegetation over time. Most metrics exhibited unstable behavior with larger MMUs. With small MMUs, most metrics were consistent across grain sizes, from fine (e.g. 0.16 m²) to relatively large (e.g. 16 m²) pixel sizes. Scale relationships were more variable at the landcover class level than at the landscape level (across all classes). This information may be useful to applied restoration practitioners, and adds to our general understanding of vegetation change in a restoring marsh.     

Adsorption of HSA, IgG and laminin-1 on model hydroxyapatite surfaces--effects of surface characteristics

Ellipsometry and mechanically assisted sodium dodecyl sulphate elution was utilized to study the adsorption of human serum albumin (HSA), human immunoglobulin G (IgG), and laminin-1, as well as competitive adsorption from a mixture of these proteins on spin-coated and sintered hydroxyapatite (HA) surfaces, respectively. The HA surfaces were characterized with respect to wettability and roughness by means of water contact angles and atomic force microscopy, respectively. Both surface types were hydrophilic, and the average roughness (Sa) and surface enlargement (Sdr) were lower for the sintered compared to the spin-coated HA surfaces. The adsorbed amounts on the sintered HA increased as follows: HSA < laminin-1 < IgG < the protein mixture. For the competitive adsorption experiments, the adsorbed fractions increased accordingly: HSA < laminin-1 < IgG on both types of HA substratum. However, a higher relative amount of HSA and laminin-1 and a lower relative amount of IgG was found on the spin-coated surfaces compared to the sintered surfaces. The effects observed could be ascribed to differences in surface roughness and chemical composition between the two types of HA substratum, and could have an influence on selection of future implant surface coatings.     

Transferability of Material Composition Indicators for Residential Buildings: A Conceptual Approach Based on a German‐Japanese Comparison

Most anthropogenic material stocks and flows are associated with the building sector. Several recent studies have developed material composition indicators (MCIs) suitable for calculating material stocks and flows of the building sector using bottom‐up approaches, which hold great potential to provide information to support resource efficiency policies. A major limitation is the lack of country‐specific MCIs. This study aims to introduce a concept for a better transferability of MCI across different contexts by proposing requirements for defining MCIs and to discuss options and limits of the transferability. We take existing MCIs for residential buildings in Germany and Japan as case studies and make them comparable by applying harmonization methods. Based on that, similarities and differences are systematically identified and discussed, considering their socioeconomic, cultural, technical, and environmental factors. Our results indicate significant limitations to the transferability of MCIs for detached houses, while bigger apartment complexes show greater homogeneity despite the very different environments in which they are constructed. This indicates that while it is possible to assume foreign MCIs as plausible for large constructions, local coefficients need to be estimated for smaller single‐family homes.