An evolutionary comparison of Acinetobacter calcoaceticus trpF with trpF genes of several organisms

The deduced amino acid sequence of Acinetobacter calcoaceticus N-(5'-phosphoribosyl) anthranilate isomerase (PRAI), which is coded by trpF, was compared with TrpF of Caulobacter crescentus, Escherichia coli, Bacillus subtilis, Saccharomyces cerevisiae, Neurospora crassa, and Aspergillus nidulans. Sixty percent of identical or similar amino acids were located in alpha/beta TIM (triose-phosphate isomerase) barrels and in residues important in substrate binding and catalysis. In addition, the analysis of trpF genes presented here supports a model by which fusion between separate trpC and trpF genes arose in some cases by in-frame deletions.     

Vortex-Induced Injectable Silk Fibroin Hydrogels

A novel, to our knowledge, technique was developed to control the rate of β-sheet formation and resulting hydrogelation kinetics of aqueous, native silk solutions. Circular dichroism spectroscopy indicated that vortexing aqueous solutions of silkworm silk lead to a transition from an overall protein structure that is initially rich in random coil to one that is rich in β-sheet content. Dynamic oscillatory rheology experiments collected under the same assembly conditions as the circular dichroism experiments indicated that the increase in β-sheet content due to intramolecular conformational changes and intermolecular self-assembly of the silk fibroin was directly correlated with the subsequent changes in viscoelastic properties due to hydrogelation. Vortexing low-viscosity silk solutions lead to orders-of-magnitude increase in the complex shear modulus, G^∗, and formation of rigid hydrogels (G^∗ ≈ 70 kPa for 5.2 wt % protein concentration). Vortex-induced, β-sheet-rich silk hydrogels consisted of permanent, physical, intermolecular crosslinks. The hydrogelation kinetics could be controlled easily (from minutes to hours) by changing the vortex time, assembly temperature and/or protein concentration, providing a useful timeframe for cell encapsulation. The stiffness of preformed hydrogels recovered quickly, immediately after injection through a needle, enabling the potential use of these systems for injectable cell delivery scaffolds.     

Plasmolysis effects and osmotic potential of two phylogenetically distinct alpine strains of Klebsormidium (Streptophyta)

The osmotic potential and effects of plasmolysis were investigated in two different Klebsormidium strains from alpine habitats by incubation in 300–2,000 (3,000) mM sorbitol. Several members of this genus were previously found to tolerate desiccation in the vegetative state yet information was lacking on the osmotic potentials of these algae. The strains were morphologically determined as Klebsormidium crenulatum and Klebsormidium nitens. These species belong to distinct clades, as verified by phylogenetic analysis of the rbcL gene. K. crenulatum is part of to the K. crenulatum/mucosum (‘F’ clade) and K. nitens of the ‘E2’ clade. Plasmolysis occurred in K. crenulatum at 800 mM sorbitol (961 mOsmol kg^?1, Ψ?=??2.09 MPa) and in K. nitens at 600 mM sorbitol (720 mOsmol kg^?1, Ψ?=??1.67 MPa). These are extraordinarily high osmotic values (very negative osmotic potentials) compared with values reported for other green algae. In K. crenulatum, the maximum photosynthetic rate (Pmax) in the light-saturated range was 116 μmol O₂ h^?1 mg^?1 chl a. Incubation in 1,000 mM sorbitol decreased Pmax to 74.1% of the initial value, whereas 2,000 mM sorbitol (Ψ?=??5.87 MPa) lead to an almost complete loss of oxygen production. In K. nitens, Pmax was 91 μmol O₂ h^?1 mg^?1 chl a under control conditions and incubation in 800 mM sorbitol did not decrease Pmax, 2,000 mM sorbitol decreased Pmax only to about 62.6% of the initial value whereas 3,000 mM sorbitol stopped oxygen evolution. This indicated a broader amplitude for photosynthesis in the examined strain of K. nitens. Control samples and samples plasmolysed for 3 h in 800 mM sorbitol (K. nitens), 1,000 mM sorbitol (K. crenulatum), or 2,000 mM sorbitol were investigated by transmission electron microscopy after chemical or high-pressure freeze fixation. In cells undergoing plasmolysis the protoplasts were retracted from the cell wall, the cytoplasm appeared dense, vacuoles were small and fragmented, and the cytoplasm was filled with ribosomes. Thin cytoplasmic strands were connected to the cell wall; 2,000 mM sorbitol increased the effect. The content of soluble carbohydrates in these two strains was investigated by HPLC, as this is one known mechanism for cells to maintain high osmotic pressure of the cytosol. Both Klebsormidium species contained diverse soluble carbohydrates, including a dominant mixed peak of unidentified oligosaccharides, and more minor amounts of raffinose, sucrose, glucose, xylose, galactose, mannose, inositol, fructose, glycerol, mannitol, and sorbitol. The total content of soluble carbohydrates was approximately 1.2% of the dry weight, indicating that this is not a major factor contributing to the high osmotic potential in these strains of Klebsormidium.     

Cysteine-to-serine mutants of the human copper chaperone for superoxide dismutase reveal a copper cluster at a domain III dimer interface

Cysteine-to-serine mutants of a maltose binding protein fusion with the human copper chaperone for superoxide dismutase (hCCS) were studied with respect to (i) their ability to transfer Cu to E,Zn superoxide dismutase (SOD) and (ii) their Zn and Cu binding and X-ray absorption spectroscopic (XAS) properties. Previous work has established that Cu(I) binds to four cysteine residues, two of which, C22 and C25, reside within an Atox1-like N-terminal domain (DI) and two of which, C244 and C246, reside in a short unstructured polypeptide chain at the C-terminus (DIII). The wild-type (WT) protein shows an extended X-ray absorption fine structure (EXAFS) spectrum characteristic of cluster formation, but it is not known how such a cluster is formed. Cys to Ser mutagenesis was used to investigate the Cu binding in more detail. Single Cys to Ser mutations, as represented by C22S and C244S, did little to affect the metal binding ratios of hCCS. Both mutants still showed approximately 2 Cu(I) ions and 1 Zn ion per protein. The double mutants C22/24S and C244/246S, on the other hand, showed Cu binding stoichiometries close to 1:1. The Zn-EXAFS of WT CCS showed a 3-4 histidine ligand environment that is consistent with Zn binding in the SOD-like domain II of CCS. The Zn environment remained unchanged between wild type and all of the mutant CCS proteins. Single Cys to Ser mutations displayed lower activity than WT protein, although close to full activity could be rescued by increasing the CCS:SOD ratios to 8:1 in the assay mixture. The structure of the Cu centers of the single mutants as revealed by EXAFS was also similar to that of WT protein, with clear indications of a Cu cluster. On the other hand, the double mutants showed a greater degree of perturbation. The DI C22/25S mutant was 70% active and formed a cluster with a more intense Cu-Cu interaction. The DIII C244/246S mutant retained only a fraction (16%) of activity and did not form a cluster. The results suggest the formation of a DIII-DIII cluster within a dimeric or tetrameric protein and further suggest that this cluster may be an important element of the copper transfer machinery.     

A Cyanobacterial Gene Encoding Peptidyl-Prolyl cis-trans Isomerase

The rotA gene encoding peptidyl-prolyl cis-trans isomerase has been identified, sequenced, and shown to be transcribed in the cyanobacterium Synechococcus sp. PCC7942. Inactivation of the gene by replacement of a region containing the open reading frame with a gene conferring kanamycin resistance resulted in merodiploids containing both the wild type and the modified genomic region. We were not able to isolate a kanamycin-resistant mutant in which all the genomic wild-type copies were substituted, which suggests that such replacement could have been lethal.     

Evaluation of PSI-BLAST alignment accuracy in comparison to structural alignments

The PSI-BLAST algorithm has been acknowledged as one of the most powerful tools for detecting remote evolutionary relationships by sequence considerations only. This has been demonstrated by its ability to recognize remote structural homologues and by the greatest coverage it enables in annotation of a complete genome. Although recognizing the correct fold of a sequence is of major importance, the accuracy of the alignment is crucial for the success of modeling one sequence by the structure of its remote homologue. Here we assess the accuracy of PSI-BLAST alignments on a stringent database of 123 structurally similar, sequence-dissimilar pairs of proteins, by comparing them to the alignments defined on a structural basis. Each protein sequence is compared to a nonredundant database of the protein sequences by PSI-BLAST. Whenever a pair member detects its pair-mate, the positions that are aligned both in the sequential and structural alignments are determined, and the alignment sensitivity is expressed as the percentage of these positions out of the structural alignment. Fifty-two sequences detected their pair-mates (for 16 pairs the success was bi-directional when either pair member was used as a query). The average percentage of correctly aligned residues per structural alignment was 43.5+/-2.2%. Other properties of the alignments were also examined, such as the sensitivity vs. specificity and the change in these parameters over consecutive iterations. Notably, there is an improvement in alignment sensitivity over consecutive iterations, reaching an average of 50.9+/-2.5% within the five iterations tested in the current study.     

Silk Film Culture System for in vitro Analysis and Biomaterial Design

Silk films are promising protein-based biomaterials that can be fabricated with high fidelity and economically within a research laboratory environment ^1,2 . These materials are desirable because they possess highly controllable dimensional and material characteristics, are biocompatible and promote cell adhesion, can be modified through topographic patterning or by chemically altering the surface, and can be used as a depot for biologically active molecules for drug delivery related applications ^3-8 . In addition, silk films are relatively straightforward to custom design, can be designed to dissolve within minutes or degrade over years in vitro or in vivo, and are produce with the added benefit of being transparent in nature and therefore highly suitable for imaging applications ^9-13. The culture system methodology presented here represents a scalable approach for rapid assessments of cell-silk film surface interactions. Of particular interest is the use of surface patterned silk films to study differences in cell proliferation and responses of cells for alignment ^12,14 . The seeded cultures were cultured on both micro-patterned and flat silk film substrates, and then assessed through time-lapse phase-contrast imaging, scanning electron microscopy, and biochemical assessment of metabolic activity and nucleic acid content. In summary, the silk film in vitro culture system offers a customizable experimental setup suitable to the study of cell-surface interactions on a biomaterial substrate, which can then be optimized and then translated to in vivo models. Observations using the culture system presented here are currently being used to aid in applications ranging from basic cell interactions to medical device design, and thus are relevant to a broad range of biomedical fields.     

The human endonexin II (ENX2) gene is located at 4q28----q32

A relatively recently identified family of structurally similar Ca2(+)-dependent phospholipid binding proteins is called the annexin gene family. At least seven genes are known, although their exact functions are unclear. The endonexin II gene (ENX2), one member of the gene family, is assigned to 4q28----q32 using both Southern transfer analysis of human x rodent somatic cell hybrid DNAs and in situ chromosome hybridization. One of the lipocortin II genes, another annexin, had previously been assigned to the long arm of chromosome 4.     

Genomic complexity among strains of the facultative photoheterotrophic bacterium Rhodobacter sphaeroides

Pulsed-field gel electrophoresis following the use of rare cutting restriction endonucleases together with Southern hybridization, using markers distributed on chromosomes I and II of Rhodobacter sphaeroides 2.4.1, has been used to examine approximately 25 strains of R. sphaeroides in an effort to assess the occurrence of genome complexity in these strains. The results suggest that genome complexity is widespread and is accompanied by substantial genomic heterogeneity.