Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Spontaneous Atomic Ruthenium Doping in Mo2CTX MXene Defects Enhances Electrocatalytic Activity for the Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) process usually suffers extremely low Faradaic efficiency and ammonia yields due to sluggish N?N dissociation. Herein, single‐atomic ruthenium modified Mo₂CT_X MXene nanosheets as an efficient electrocatalyst for nitrogen fixation at ambient conditions are reported. The catalyst achieves a Faradaic efficiency of 25.77% and ammonia yield rate of 40.57 µg h^?1 mg^?1 at ‐0.3 V versus the reversible hydrogen electrode in 0.5 m K₂SO₄ solution. Operando X‐ray absorption spectroscopy studies and density functional theory calculations reveal that single‐atomic Ru anchored on MXene nanosheets act as important electron back‐donation centers for N₂ activation, which can not only promote nitrogen adsorption and activation behavior of the catalyst, but also lower the thermodynamic energy barrier of the first hydrogenation step. This work opens up a promising avenue to manipulate catalytic performance of electrocatalysts utilizing an atomic‐level engineering strategy.     

Redox‐Active Organic Compounds for Future Sustainable Energy Storage System

Utilizing redox‐active organic compounds for future energy storage system (ESS) has attracted great attention owing to potential cost efficiency and environmental sustainability. Beyond enriching the pool of organic electrode materials with molecular tailoring, recent scientific efforts demonstrate the innovations in various cell chemistries and configurations. Herein, recent major strategies to build better organic batteries, are highlighted: diversifying charge‐carrying ions, modifying electrolytes, and utilizing liquid‐type organic electrodes. Each approach is summarized along with their advantages over Li‐ion batteries (LIBs). An outlook is also provided on the practical realization of organic battery systems, which hints at possible solutions for future sustainable ESSs.     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.     

Optimized Catalytic WS2–WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium–Sulfur Batteries

The lithium–sulfur (Li–S) battery is a next generation high energy density battery, but its practical application is hindered by the poor cycling stability derived from the severe shuttling of lithium polysulfides (LiPSs). Catalysis is a promising way to solve this problem, but the rational design of relevant catalysts is still hard to achieve. This paper reports the WS₂–WO₃ heterostructures prepared by in situ sulfurization of WO₃, and by controlling the sulfurization degree, the structure is controlled, which balances the trapping ability (by WO₃) and catalytic activity (by WS₂) toward LiPSs. As a result, the WS₂–WO₃ heterostructures effectively accelerate LiPS conversion and improve sulfur utilization. The Li–S battery with 5 wt% WS₂–WO₃ heterostructures as additives in the cathode shows an excellent rate performance and good cycling stability, revealing a 0.06% capacity decay each cycle over 500 cycles at 0.5 C. By building an interlayer with such heterostructure‐added graphenes, the battery with a high sulfur loading of 5 mg cm^?2 still shows a high capacity retention of 86.1% after 300 cycles at 0.5 C. This work provides a rational way to prepare the metal oxide–sulfide heterostructures with an optimized structure to enhance the performance of Li–S batteries.     

Building Electron/Proton Nanohighways for Full Utilization of Water Splitting Catalysts

Low electron/proton conductivities of electrochemical catalysts, especially earth‐abundant nonprecious metal catalysts, severely limit their ability to satisfy the triple‐phase boundary (TPB) theory, resulting in extremely low catalyst utilization and insufficient efficiency in energy devices. Here, an innovative electrode design strategy is proposed to build electron/proton transport nanohighways to ensure that the whole electrode meets the TPB, therefore significantly promoting enhance oxygen evolution reactions and catalyst utilizations. It is discovered that easily accessible/tunable mesoporous Au nanolayers (AuNLs) not only increase the electrode conductivity by more than 4000 times but also enable the proton transport through straight mesopores within the Debye length. The catalyst layer design with AuNLs and ultralow catalyst loading (≈0.1 mg cm^?2) augments reaction sites from 1D to 2D, resulting in an 18‐fold improvement in mass activities. Furthermore, using microscale visualization and unique coplanar‐electrode electrolyzers, the relationship between the conductivity and the reaction site is revealed, allowing for the discovery of the conductivity‐determining and Debye‐length‐determining regions for water splitting. These findings and strategies provide a novel electrode design (catalyst layer + functional sublayer + ion exchange membrane) with a sufficient electron/proton transport path for high‐efficiency electrochemical energy conversion devices.     

New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling

Lithium–sulfur batteries (LSBs) are considered promising candidates for the next‐generation energy‐storage systems due to their high theoretical capacity and prevalent abundance of sulfur. Their reversible operation, however, encounters challenges from both the anode, where dendritic and dead Li‐metal form, and the cathode, where polysulfides dissolve and become parasitic shuttles. Both issues arise from the imperfection of interphases between electrolyte and electrode. Herein, a new lithium salt based on an imide anion with fluorination and unsaturation in its structure is reported, whose interphasial chemistries resolve these issues simultaneously. Lithium 1, 1, 2, 2, 3, 3‐hexafluoropropane‐1, 3‐disulfonimide (LiHFDF) forms highly fluorinated interphases at both anode and cathode surfaces, which effectively suppress formation of Li‐dendrites and dissolution/shuttling of polysulfides, and significantly improves the electrochemical reversibility of LSBs. In a broader context, this new Li salt offers a new perspective for diversified beyond Li‐ion chemistries that rely on a Li‐metal anode and active cathode materials.     

Distinct lung microbial community states in patients with pulmonary tuberculosis

An improved understanding of the lung microbiome may lead to better strategies to diagnose, treat, and prevent pulmonary tuberculosis(PTB). However, the characteristics of the lung microbiomes of patients with TB remain largely undefined. In this study, 163 bronchoalveolar lavage(BAL) samples were collected from 163 sputum-negative suspected PTB patients. Furthermore, 12 paired BAL samples were obtained from 12 Mycobacterium tuberculosis-positive(MTB+) patients before and after negative conversion following a two-month anti-TB treatment. The V3–V4 region of the 16 S ribosomal RNA(rRNA) gene was used to characterize the microbial composition of the lungs. The results showed that the prevalence of MTB in the BAL samples was 42.9%(70/163) among the sputum-negative patients. The α-diversity of lung microbiota was significantly less diverse in MTB+ patients compared with Mycobacterium tuberculosis-negative(MTB–) patients. There was a significant difference in β-diversity between MTB+ and MTB– patients. MTB+ patients were enriched with Anoxybacillus, while MTB– patients were enriched with Prevotella, Alloprevotella, Veillonella, and Gemella. There was no significant difference between the Anoxybacillus detection rates of MTB+ and MTB– patients. The paired comparison between the BAL samples from MTB+ patients and their negative conversion showed that BAL negative-conversion microbiota had a higher α-diversity. In conclusion, distinct features of airway microbiota could be identified between samples from patients with and without MTB. Our results imply links between lung microbiota and different clinical groups of active PTB.