[3H]Pteroylglutamic acid (PteGlu) uptake was studied using brush-border membrane vesicles isolated from rat kidney. Results on the uptake of [3H]PteGlu by brush-border membrane vesicles incubated in media of increasing osmolarities demonstrated that uptake was contributed by two components, intravesicular transport and membrane binding. Both the components of the uptake exhibited similar pH dependence, with maxima at pH 5.6, and were found to be saturable mechanisms with Km values of 6.7.10(-7) and 11.2.10(-7) M, respectively. These studies show that PteGlu is transported by isolated rat kidney brush-border membrane vesicles in a manner consistent with a saturable system and that a binding component may be functionally associated with this. 相似文献
The role of opioid and histaminergic system in morphine induced emesis was investigated in dogs. Morphine (25 micrograms, icv) consistently evoked emesis with an average latency of 195 +/- 29 sec which was fully accounted for by an action on the chemoreceptor trigger zone (CTZ) as its ablation rendered animals refractory to vomiting. Intraventricular pretreatment with opioid antagonist naloxone, histamine H1 antagonist mepyramine and H2 antagonists metiamide and cimetidine afforded protection to icv morphine emesis. The CSF histamine concentration was significantly raised 5 min after icv morphine administration. The results suggest that both endogenous opioid and histamine are involved in morphine emesis. Naloxone in high doses (1600 micrograms, icv) elicited emesis which was not blocked by CTZ ablation confirming our earlier report. 相似文献
Analysis by 1H-NMR spectroscopic techniques of the conformation of the N-terminal segment of the LC1 alkali light chain of rabbit skeletal muscle has shown that this portion of the molecule adopts a well-defined elongated configuration. This rod-like feature is a consequence of the Ala/Pro-rich composition and the functional aspects of such conformational preference in this and similar segments in other proteins are discussed. 相似文献
A spontaneous ameloblastic odontoma was found in an 86-week-old male Fischer 344 rat. Radiographic and histopathologic characteristics confirmed the diagnosis as a true benign neoplasm. 相似文献
In recent years, drug manufacturers and researchers have begun to consider the nanobiotechnology approach to improve the drug delivery system for tumour and cancer diseases. In this article, we review current strategies to improve tumour and cancer drug delivery, which mainly focuses on sustaining biocompatibility, biodistribution, and active targeting. The conventional therapy using cornerstone drugs such as fludarabine, cisplatin etoposide, and paclitaxel has its own challenges especially not being able to discriminate between tumour versus normal cells which eventually led to toxicity and side effects in the patients. In contrast to the conventional approach, nanoparticle-based drug delivery provides target-specific delivery and controlled release of the drug, which provides a better therapeutic window for treatment options by focusing on the eradication of diseased cells via active targeting and sparing normal cells via passive targeting. Additionally, treatment of tumours associated with the brain is hampered by the impermeability of the blood–brain barriers to the drugs, which eventually led to poor survival in the patients. Nanoparticle-based therapy offers superior delivery of drugs to the target by breaching the blood–brain barriers. Herein, we provide an overview of the properties of nanoparticles that are crucial for nanotechnology applications. We address the potential future applications of nanobiotechnology targeting specific or desired areas. In particular, the use of nanomaterials, biostructures, and drug delivery methods for the targeted treatment of tumours and cancer are explored. 相似文献
Nitrate, nitrite and nitrous oxide were denitrified to N2 gas by washed cells ofRhizobium japonicum CC706 as well as by bacteroids prepared from root nodules ofGlycine max (L.) Merr. (CV. Clark 63). Radiolabelled N2 was produced from either K15NO3 or Na15NO2 by washed cells ofRh. japonicum CC705 grown with either nitrate only (5 mM) or nitrate (5 mM) plus glutamate (10 mM). Nitrogen gas was also produced from N2O. Similar results were obtained with bacteroids ofG. max. The stoichiometry for the utilization of15NO
3-
or15NO
2-
and the produciton of15N2 was 2:1 and for N2O utilization and N2 production it was 1:1. Some of the15N2 gas produced by denitrification of15NO
3-
in bacteroids was recycled via nitrogenase into cell nitrogen. 相似文献
The technique of fluorescence quenching by the non-ionic quenchers acrylamide and nicotinamide has been used to probe the accessibility of the environmentally sensitive N-(bromoacetyl)-N'-(1-sulpho-5-naphthyl) ethylenediamine (1,5-Br-AEDANS) fluorophore attached to either Cys-177 of the A1-light chain or the SH1 thiol (Cys-707) of the myosin subfragment (S1) heavy chain. Neither quencher caused any detrimental effects to the ATPase activities of S1 under the conditions of the experiments. It was found that the fluorophore on the isolated light chain was highly exposed to solvent and although this exposure was reduced on hybridization into S1(A1-AEDANS), the probe was still accessible to solvent. This exposure was unaltered by formation of binary complexes with either Mg.ATP or actin or by the formation of a weakly associated acto-S1 complex (in which the Cys-697 and Cys-707 residues of S1 were crosslinked with p-phenylenedimaleimide). The lack of corresponding change in lambda max of emission and quantum yield supported the quenching date and indicated that actin neither binds directly to this region nor induces any significant conformational changes in this locality despite the observation that the A1-Cys-707 moves some 3 nm closer to a point on actin in the weak-binding state (Trayer, H.R. and Trayer, I.P. (1988) Biochemistry, 27, 5718-5727). Parallel experiments with the fluorophore attached to the Cys-707 of the S1 indicated that this region was less accessible to solvent than the light chain thiol despite its ease of labelling. This exposure was not significantly altered by binary complex formation with actin and Mg.ATP, although spectral changes in the absence of quencher support the notion that some conformational change is occurring in this region. 相似文献
Nucleic Acid Aptamers (NAAs) are a class of synthetic DNA or RNA molecules that bind specifically to their target. We recently introduced an aptamer termed R1.2 against membrane Immunoglobulin M (mIgM) expressing B-cell neoplasms using Ligand Guided Selection (LIGS). While LIGS-generated aptamers are highly specific, their lower affinity prevents aptamers from being used for translational applications. Highly specific aptamers with higher affinity can increase targetability, boosting the application of aptamers as diagnostic and therapeutic molecules. Herein, we report that dimerization of R1.2, an aptamer generated from LIGS, leads to high affinity variants without compromising the specificity. Three dimeric aptamer analogues with variable linker lengths were designed to evaluate the effect of linker length in affinity. The optimized dimeric R1.2 against cultured B-cell neoplasms, four donor B-cell samples and mIgM-positive Waldenström's Macroglobulinemia (WM) showed specificity. Furthermore, confocal imaging of dimeric aptamer and anti-IgM antibody in purified B-cells suggests co-localization. Binding assays against IgM knockout Burkitt's Lymphoma cells utilizing CRISPR/Cas9 further validated specificity of dimeric R1.2. Collectively, our findings show that LIGS-generated aptamers can be re-engineered into dimeric aptamers with high specificity and affinity, demonstrating wide-range of applicability of LIGS in developing clinically practical diagnostic and therapeutic aptamers. 相似文献
The main purpose of this paper is to explore the opportunities for fresh Nostoc sphaeroides (N. sphaeroides) to be applied to 3D food printing. N. sphaeroides is rich in nutrients and its paste possesses shear thinning properties. It was found the product obtained by 3D food printing with fresh N. sphaeroides had poor printability and was easy to collapse. In this study, we compared the addition of different potato starch (2%, 4%, 6% and 8%) to the characteristics of 3D printing of the N. sphaeroides gel system. The results obtained from the rheological analysis showed that the 6% potato starch added to of N. sphaeroides gel can be utilized for 3D food printing. The addition of potato starch increased the viscosity of the mixture so the printed lines were not easily broken, and the “self-supporting ability” of the material itself was enhanced to maintain a good shape without collapse. Texture profile analysis also showed that the 6% starch added printed product had the best gumminess parameter. In order to get a better printed product, the effects of printing parameters (nozzle diameter (Dn), extrusion rate (Vd) and nozzle moving speed (Vn)) on material printing performance and product formability was tested. When Dn, Vd, Vn were = 1.2 mm, 20 mm3/s, 25 mm/s, respectively, the printed product was having similar to the target product, with less breakage and less the changing of shape. Overall results show that 3D printing technology is a rising method for producing N. sphaeroides-based new products.