Synthesis and evaluation of affinity adsorbents for glycoproteins: an artificial lectin

A combination of rational design based on mimicking natural protein–carbohydrate interactions and solid-phase combinatorial chemistry has led to the identification of an affinity ligand which displays selectivity for the mannose moiety of glycoproteins. The ligand, denoted 18/18 and comprising a triazine scaffold bis-substituted with 5-aminoindan, has been synthesised in solution, characterised by TLC, ¹H-NMR and MS. When immobilised to amine-derivatised agarose at concentrations >24 μmol/g moist weight gel, ligand 18/18 selectively binds glucose oxidase. The adsorbed enzyme was quantitatively eluted with 0.5 M α- -methyl-mannoside and to a lesser extent with the equivalent glucoside. An investigation of the comparative retention times of saccharidic solutes showed that significant retardation was observed for α- -mannose, mannobiose and mannan, with little or no evidence for selective retention of other saccharides, with the exception of α- -fucose. Interestingly, α- -fucose and α- -mannose share an identical configuration of the hydroxyl groups on C-2, C-3 and C-4. Analysis of Scatchard plots from partition equilibrium studies on the interaction of glucose oxidase and the p-nitrophenyl-glycosides of -mannose, -glucose, -fucose and -galactose with immobilised 18/18 establish that the affinity constants (K_AX) for the enzyme, the glycosides of mannose, glucose and fucose, and the p-nitrophenyl-galactoside are 4.3×10⁵ M⁻¹, 1.9×10⁴ M⁻¹ and 1.2×10⁴ M⁻¹ respectively. ¹H-NMR studies on the interaction of α- -methyl-mannoside with ligand 18/18 in solution confirm the involvement of the hydroxyl group in the C-2 position. Molecular modelling suggests the formation of four hydrogen bonds between the hydroxyl groups at positions C-2, C-3 and C-4 of α- -methyl-mannoside and the bridging and ring nitrogen atoms of the triazine scaffold, with aromatic stacking of a second ligand against the carbohydrate face. The greater specificity of ligand 18/18 for mannose and glucose than for galactose parallels that exhibited by concanavalin A.     

Enhancement of Disease Control Efficacy of Chemical Fungicides Combined with Plant Resistance Inducer 2,3-Butanediol against Turfgrass Fungal Diseases

Turfgrass, the most widely grown ornamental crop, is severely affected by fungal pathogens including Sclerotinia homoeocarpa, Rhizoctonia solani, and Magnaporthe poae. At present, turfgrass fungal disease management predominantly relies on synthetic fungicide treatments. However, the extensive application of fungicides to the soil increases residual detection frequency, raising concerns for the environment and human health. The bacterial volatile compound, 2,3-butanediol (BDO), was found to induce plant resistance. In this study, we evaluated the disease control efficacy of a combination of stereoisomers of 2,3-BDO and commercial fungicides against turfgrass fungal diseases in both growth room and fields. In the growth room experiment, the combination of 0.9% 2R,3R-BDO (levo) soluble liquid (SL) formulation and 9% 2R,3S-BDO (meso) SL with half concentration of fungicides significantly increased the disease control efficacy against dollar spot and summer patch disease when compared to the half concentration of fungicide alone. In field experiments, the disease control efficiency of levo 0.9% and meso 9% SL, in combination with a fungicide, was confirmed against dollar spot and large patch disease. Additionally, the induction of defense-related genes involved in the salicylic acid and jasmonic acid/ethylene signaling pathways and reactive oxygen species detoxification-related genes under Clarireedia sp. infection was confirmed with levo 0.9% and meso 9% SL treatment in creeping bentgrass. Our findings suggest that 2,3-BDO isomer formulations can be combined with chemical fungicides as a new integrated tool to control Clarireedia sp. infection in turfgrass, thereby reducing the use of chemical fungicides.     

Evaluation of Medium Components by Plackett-Burman Statistical Design for Lipase Production by Candida rugosa and Kinetic Modeling

Lipase production by Candida rugosa was carried out in submerged fermentation. Plackett-Burman statistical experimental design was applied to evaluate the fermentation medium components. The effect of twelve medium components was studied in sixteen experimental trials. Glucose, olive oil, peptone and FeCl3?6H2O were found to have more significance on lipase production by Candida rugosa. Maximum lipase activity of 3.8 u mL-1 was obtained at 50 h of fermentation period. The fermentation was carried out at optimized temperature of 30oC, initial pH of 6.8 and shaking speed of 120 r/min. Unstructured kinetic models were used to simulate the experimental data. Logistic model, Luedeking-Piret model and modified Luedeking-Piret model were found suitable to efficiently predict the cell mass, lipase production and glucose consumption respectively with high determination coefficient(R2). From the estimated values of the Luedeking-Piret kinetic model parameters, α and β, it was found that the lipase production by Candida rugosa is growth associated.     

A Review on Saponin Biosynthesis and its Transcriptomic Resources in Medicinal Plants

Plant Molecular Biology Reporter - Saponins are naturally occurring glycosides which are produced by various plant species with diverse biological properties. The surface-active properties of...     

An electrically-controlled programmable microfluidic concentration waveform generator

Background

Biological systems have complicated environmental conditions that vary both spatially and temporally. It becomes necessary to impose time-varying soluble factor concentrations to study such systems, including cellular responses to pharmaceuticals, inflammation with waxing and waning cytokine concentrations, as well as circadian rhythms and their metabolic manifestations. There is therefore a need for platforms that can achieve time-varying concentrations with arbitrary waveforms.

Results

To address this need, we developed a microfluidic system that can deliver concentration waveforms in a fast and accurate manner by adopting concepts and tools from electrical engineering and fluid mechanics. Specifically, we employed pulse width modulation (PWM), a commonly used method for generating analog signals from digital sources. We implement this technique using three microfluidic components via laser ablation prototyping: low-pass filter (lower frequency signals permitted, high frequency signals blocked), resistor, and mixer. Each microfluidic component was individually studied and iteratively tuned to generate desired concentration waveforms with high accuracy. Using fluorescein as a small-molecule soluble factor surrogate, we demonstrated a series of concentration waveforms, including square, sawtooth, sinusoidal, and triangle waves with frequencies ranging from 100 mHz to 400 mHz.

Conclusion

We reported the fabrication and characterization of microfluidic platform that can generate time-varying concentrations of fluorescein with arbitrary waveforms. We envision that this platform will enable a wide range of biological studies, where time-varying soluble factor concentrations play a critical role. In addition, the technology is expected to assist in the development of biomedical devices that allow precise dosing of pharmaceuticals for enhanced therapeutic efficacy and reduced toxicity.

     

Comparison of various maturation treatments on in vitro maturation of goat oocytes and their early embryonic development and cell numbers

In the present study, comparison of 2 different culture media (Ham's F-12 and M-199) for supporting in vitro maturation of goat oocytes, and their subsequent embryonic development was evaluated in the presence or absence of sera (estrous goat serum, EGS and fetal calf serum, FCS) and hormones (FSH, 0.5 ug/ml, LH, 5 ug/ml and estradiol, 1 ug/ml). Neither medium (Ham's F-12 or M-199) when supplemented with EGS and hormones showed any notable changes in the maturation rate nor in cleavage and blastocyst development. The mean cell number for blastocysts was also significantly low (P < 0.05). However, Ham's F-12 medium supplemented with FCS and hormones showed a considerable increase in the maturation rate, but subsequent embryonic development was not appreciably increased. However, maturation, cleavage and blastocyst development rates of oocytes matured in M-199 medium in combination with 10% FCS and hormones were significantly higher (P < 0.05). Mean cell number per blastocyst was also significantly increased in this latter treatment compared with that of the other groups (P < 0.05). The results thus indicated that both the culture medium and serum have a marked effect on maturation and subsequent embryonic development. Further, the results also showed that the combination of M-199 with FSH, LH and E2 supplemented with 10% FCS was the most efficacious medium for in vitro maturation and subsequent embryonic development of the media, sera and hormone combinations studied.     

Association of genetic variants with response to iron supplements in pregnancy

The incidence of iron deficiency anemia in pregnancy is high in India where iron supplementation is a regular practice. The response to oral iron is influenced by several factors such as age, body mass index, gravida, socioeconomic status, food, vitamin deficiency and compliance to supplements. The major challenge is to understand the various modulators of iron status in this high-risk group so that we can improve the diagnosis and the management of these patients. The current study was designed to evaluate the iron status during pregnancy and to identify factors which might be influencing their response to oral iron. We investigated a total of 181 pregnant women with anemia (Hb < 11 g/dl) and evaluated the impact of probable factors on anemia and their iron status. Assessment of the response was based on hemoglobin and serum ferritin or transferrin saturation level after 8 and 20 weeks of iron supplementation. Socioeconomic, clinical, hematological, biochemical and genetic factors were all evaluated. Molecular analysis revealed that HFE variant allele (G) (rs1799945) was significantly associated with an adequate response to iron supplementation. We identified five subjects with a sustained poor response, and targeted re-sequencing of eleven iron-related genes was performed in them. We have identified seven novel variants in them, and in silico analysis suggested that these variants may have an iron regulatory effect. Taken together, our findings underscore the association of genetic variants with response to supplements in pregnancy, and they can be extended to other diseases where anemia and iron deficiency coexist.

Electronic supplementary material

The online version of this article (doi:10.1007/s12263-015-0474-2) contains supplementary material, which is available to authorized users.     

Production of bio-ethanol from pretreated agricultural byproduct using enzymatic hydrolysis and simultaneous saccharification

Global warming alerts and threats are on the rise due to the utilization of fossil fuels. Alternative fuel sources like bio-ethanol and biodiesel are being produced to combat against these threats. Bio-ethanol can be produced from a range of substrate. The present study is aimed at the Production of bioethanol from pretreated agricultural substrate using enzymatic hydrolysis and simultaneous saccharification with the addition of purified fungal enzyme. Most cellulosic biomass is not fermentable without appropriate pretreatment methods and so dilute sulfuric acid pretreatment was applied to make the cellulose contained in the waste susceptible to endoglucanase enzyme. A range of acid pretreatment of wheat bran was made in which the sample that was pretreated with 1% dilute sulfuric acid gave maximum yield of ethanol in both methods such as 5.83 g L(-1) and 5.27 g L(-1), respectively. Ethanol produced from renewable and cheap agricultural products (wheat bran) provides reduction in green house gas emission, carbon monoxide, sulfur, and helps to eliminate smog from the environment.     

Variability of Indian Isolates of Tilletia indica Assessed by Pathogenicity and Molecular Markers

Twenty isolates of Tilletia indica collected from sites in North and North‐western India showed pathogenic variation on 18 host differentials. Sixteen aggressive pathotypes were identified on the basis of percent coefficient of infection (PCI). Two major clusters were apparent in the dendrogram; cluster 1 comprised 13 isolates and cluster two consisted of seven isolates. One of the isolate Kashipur had a high PCI on most of the host differentials compared to other isolates. Polymerase chain reaction‐based random amplified polymorphic DNA (PCR – RAPD) analysis also divided isolates into two major clusters, one comprising of 5 isolates collected from hill and foot‐hill sites and another group comprising of 15 isolates collected from plain sites. Thus, the clusters identified based on PCI did not match closely with those identified by molecular analysis based on RAPD. Although diversity among the isolates of T. indica was absent in the rDNA‐ITS region, our study based on pathogenicity and molecular markers confirms the existence of great diversity in the pathogen, also shifting of ‘hot spot’ areas from one place to another within Karnal bunt prevailing areas.