Deletion of pancreatic β‐cell adenosine kinase improves glucose homeostasis in young mice and ameliorates streptozotocin‐induced hyperglycaemia

Severe reduction in the β‐cell number (collectively known as the β‐cell mass) contributes to the development of both type 1 and type 2 diabetes. Recent pharmacological studies have suggested that increased pancreatic β‐cell proliferation could be due to specific inhibition of adenosine kinase (ADK). However, genetic evidence for the function of pancreatic β‐cell ADK under physiological conditions or in a pathological context is still lacking. In this study, we crossed mice carrying LoxP‐flanked Adk gene with Ins2‐Cre mice to acquire pancreatic β ‐cell ADK deficiency (Ins2‐Cre^±Adk^fl/fl) mice. Our results revealed that Ins2‐Cre^+/‐Adk^fl/fl mice showed improved glucose metabolism and β‐cell mass in younger mice, but showed normal activity in adult mice. Moreover, Ins2‐Cre^±Adk^fl/fl mice were more resistant to streptozotocin (STZ) induced hyperglycaemia and pancreatic β‐cell damage in adult mice. In conclusion, we found that ADK negatively regulates β‐cell replication in young mice as well as under pathological conditions, such as STZ induced pancreatic β‐cell damage. Our study provided genetic evidence that specific inhibition of pancreatic β‐cell ADK has potential for anti‐diabetic therapy.     

Steric Engineering of Alkylthiolation Side Chains to Finely Tune Miscibility in Nonfullerene Polymer Solar Cells

Morphology and miscibility control are still a great challenge in polymer solar cells. Despite physical tools being applied, chemical strategies are still limited and complex. To finely tune blend miscibility to obtain optimized morphology, chemical steric engineering is proposed to systemically investigate its effects on optical and electronic properties, especially on a balance between crystallinity and miscibility. By changing the alkylthiol side chain orientation different steric effects are realized in three different polymers. Surprisingly, the photovoltaic device of the polymer PTBB‐m with middle steric structure affords a better power conversion efficiency, over 12%, compared to those of the polymers PTBB‐o and PTBB‐p with large or small steric structures, which could be attributed to a more balanced blend miscibility without sacrificing charge‐carrier transport. Space charge‐limited current, atomic force microscopy, grazing incidence wide angle X‐ray scattering, and resonant soft X‐ray scattering measurements show that the steric engineering of alkylthiol side chains can have significant impacts on polymer aggregation properties, blend miscibility, and photovoltaic performances. More important, the control of miscibility via the simple chemical approach has preliminarily proved its great potential and will pave a new avenue for optimizing the blend morphology.     

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Ni‐rich Li[Ni_xCo_yMn_1?x?y]O₂ (x ≥ 0.8) layered oxides are the most promising cathode materials for lithium‐ion batteries due to their high reversible capacity of over 200 mAh g^?1. Unfortunately, the anisotropic properties associated with the α‐NaFeO₂ structured crystal grains result in poor rate capability and insufficient cycle life. To address these issues, a micrometer‐sized Ni‐rich LiNi_0.8Co_0.1Mn_0.1O₂ secondary cathode material consisting of radially aligned single‐crystal primary particles is proposed and synthesized. Concomitant with this unique crystallographic texture, all the exposed surfaces are active {010} facets, and 3D Li⁺ ion diffusion channels penetrate straightforwardly from surface to center, remarkably improving the Li⁺ diffusion coefficient. Moreover, coordinated charge–discharge volume change upon cycling is achieved by the consistent crystal orientation, significantly alleviating the volume‐change‐induced intergrain stress. Accordingly, this material delivers superior reversible capacity (203.4 mAh g^?1 at 3.0–4.3 V) and rate capability (152.7 mAh g^?1 at a current density of 1000 mA g^?1). Further, this structure demonstrates excellent cycling stability without any degradation after 300 cycles. The anisotropic morphology modulation provides a simple, efficient, and scalable way to boost the performance and applicability of Ni‐rich layered oxide cathode materials.     

Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries

Solid polymer electrolytes as one of the promising solid‐state electrolytes have received extensive attention due to their excellent flexibility. However, the issues of lithium (Li) dendrite growth still hinder their practical applications in solid‐state batteries (SSBs). Herein, composite electrolytes from “ceramic‐in‐polymer” (CIP) to “polymer‐in‐ceramic” (PIC) with different sizes of garnet particles are investigated for their effectiveness in dendrite suppression. While the CIP electrolyte with 20 vol% 200 nm Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) particles (CIP‐200 nm) exhibits the highest ionic conductivity of 1.6 × 10^?4 S cm^?1 at 30 °C and excellent flexibility, the PIC electrolyte with 80 vol% 5 µm LLZTO (PIC‐5 µm) shows the highest tensile strength of 12.7 MPa. A sandwich‐type composite electrolyte (SCE) with hierarchical garnet particles (a PIC‐5 µm interlayer sandwiched between two CIP‐200 nm thin layers) is constructed to simultaneously achieve dendrite suppression and excellent interfacial contact with Li metal. The SCE enables highly stable Li plating/stripping cycling for over 400 h at 0.2 mA cm^?2 at 30 °C. The LiFePO₄/SCE/Li cells also demonstrate excellent cycle performance at room temperature. Fabricating sandwich‐type composite electrolytes with hierarchical filler designs can be an effective strategy to achieve dendrite‐free SSBs with high performance and high safety at room temperature.     

Introgression lines of Solanum sitiens,a wild nightshade of the Atacama Desert,in the genome of cultivated tomato

The wild tomato relative Solanum sitiens is a xerophyte endemic to the Atacama Desert of Chile and a potential source of genes for tolerance to drought, salinity and low‐temperature stresses. However, until recently, strong breeding barriers prevented its hybridization and introgression with cultivated tomato, Solanum lycopersicum L. We overcame these barriers using embryo rescue, bridging lines and allopolyploid hybrids, and synthesized a library of introgression lines (ILs) that captures the genome of S. sitiens in the background of cultivated tomato. The IL library consists of 56 overlapping introgressions that together represent about 93% of the S. sitiens genome: 65% in homozygous and 28% in heterozygous (segregating) ILs. The breakpoints of each segment and the gaps in genome coverage were mapped by single nucleotide polymorphism (SNP) genotyping using the SolCAP SNP array. Marker‐assisted selection was used to backcross selected introgressions into tomato, to recover a uniform genetic background, to isolate recombinant sub‐lines with shorter introgressions and to select homozygous genotypes. Each IL contains a single S. sitiens chromosome segment, defined by markers, in the genetic background of cv. NC 84173, a fresh market inbred line. Large differences were observed between the lines for both qualitative and quantitative morphological traits, suggesting that the ILs contain highly divergent allelic variation. Several loci contributing to unilateral incompatibility or hybrid necrosis were mapped with the lines. This IL population will facilitate studies of the S. sitiens genome and expands the range of genetic variation available for tomato breeding and research.     

福建梅花山自然保护区蕨类植物区系研究

通过野外调查和资料整理,统计分析梅花山自然保护区蕨类植物区系组成和分布区类型,比较其与周边相邻4个自然保护区的蕨类植物区系的相似性。结果表明:(1)梅花山自然保护区共有蕨类植物42科83属189种,科、属组成优势现象明显,区系起源古老。(2)分布区类型在科、属级水平上以泛热带分布和世界分布为主,种级水平以热带亚洲分布、东亚分布和中国特有分布为主,热带亲缘明显,具有由热带向温带过渡的性质。(3)在地理亲缘关系上,梅花山与梁野山的蕨类植物区系联系最为紧密,与圭龙山的关系次之,与热带区系性质较强的南靖南亚热带雨林自然保护区和典型的中亚热带性质的武夷山自然保护区的种子植物区系联系较为疏远,具有从南亚热带向中亚热带过渡的明显特点。     

Fullerene nanoparticles for the treatment of ulcerative colitis

Ulcerative colitis (UC) is a long-term, recurrent inflammatory bowel disease for which no effective cure is yet available in the clinical setting. Repairing the barrier dysfunction of the colon and reducing intestinal inflammation are considered key objectives to cure UC. Here we demonstrate a novel therapeutic strategy based on a C₆₀ fullerene suspension (C₆₀FS) to treat dinitrobenzene sulfonic acid-induced UC in an animal model. C₆₀FS can repair the barrier dysfunction of UC and effectively promote the healing of ulcers; it also manifests better treatment effects compared with mesalazine enema. C₆₀FS can reduce the numbers of basophils in the blood of UC rats and mast cells in the colorectal tissue, thereby effectively alleviating inflammation. The expression of H1R, H4R, and VEGFR2 receptors in colorectal tissues is inhibited by C₆₀FS, and the levels of histamine and prostaglandin in the rat blood are reduced. This work presents a reliable strategy based on fullerene to cure UC and provides a novel guide for UC treatment.

     

A new metabolite with a new substitution pattern from the seeds of the Chinese Yew, Taxus mairei

A new taxoid metabolite with a new substitution pattern was isolated from the methanol extract of the seeds of Taxus mairei, and its structure was established as 5alpha,15-dihydroxy-7beta,9alpha-diacetoxy-11(15-->1)abeo-taxa-4(20),11-dien-13-one (1) on the basis of spectral analysis including (1)H- and (13)C-NMR, HMQC, HMBC, NOESY, and confirmed by HR-FAB mass spectrometry.