Novel stabilization of phenylalanine ammonia-lyase catalyst during bioconversion of trans-cinnamic acid to l-phenylalanine

Summary Production of l-phenylalanine from trans-cinnamic acid using isolate SPA10 cells was reduced to 26% of that observed initially when cells were reacted a second time with fresh substrate mixture. The stability (reuseability) of Phenylalanine Ammonia-Lyase (PAL) containing cells was significantly influenced by both the trans-cinnamate concentration and initial reaction pH. Using 2% t-cinnamate, l-phenylalanine production was 7-fold greater after 3 successive runs at pH 9.0 than at the optimum of pH 10.2. Cells reacted in the presence of 5% t-cinnamate were relatively unstable. Permeabilising agents, such as toluene and xylene, stimulated l-phenylalanine production but also enhanced instability of the catalyst. Several effectors were shown to stimulate the initial rate of the PAL bioconversion, but only sorbitol, alginate, glutaraldehyde, polyethylene glycol and glycerol conferred any significant degree of stability. Sparging of cultures and bioreactors with various gases revealed that oxygen enhanced PAL inactivation, CO₂ had little effect and nitrogen conferred remarkable stability on PAL activity for several weeks in culture medium. The presence of chloride ions (from HCl) and aeration of substrate mixtures resulted in poor reuseability of catalyst. A combination of H₂SO₄ substitution for HCl and N₂-sparging resulted in excellent initial conversions and good catalyst stability at 26°C but less at 30°C. The inclusion of 1.5 M sorbitol in reaction mixtures maintained PAL stability over several successive incubations.     

Recalibration of the Pseudomonas aeruginosa Strain Pao Chromosome Map in Time Units Using High-Frequency-of-Recombination Donors

High-frequency-of-recombination donors of P. aeruginosa strain PAO were generated using a temperature-sensitive, replication mutant of the IncP-1 plasmid R68, loaded with the transposon Tn2521. Fourteen donors so isolated mobilized the chromosome in a polarized manner from a number of different transfer origins. The donors were used to construct a time of entry map of the entire chromosome and this was achieved by determining the time of entry of 32 randomly dispersed markers in crosses using nalidixic acid to interrupt chromosome transfer. Analysis of the time of entry data enabled the recalibration of the chromosome map to 75 min.     

The nifA gene of Rhizobium meliloti is oxygen regulated.

Experiments using plasmid-borne gene fusions and direct RNA measurements have revealed that expression from the nifA gene is induced in Rhizobium meliloti when the external oxygen concentration is reduced to microaerobic levels. Induction occurs in the absence of alfalfa and in the presence of fixed nitrogen and does not require ntrC. The production of functional nifA gene product (NifA) can be demonstrated by its ability to activate the nitrogenase promoter P1. Aerobic induction of nifA can also occur during nitrogen starvation at low pH, but in this case induction is dependent on ntrC and does not lead to P1 activation. The data indicate that reduced oxygen tension is potentially a major trigger for symbiotic activation of nitrogen fixation in Rhizobium species.     

Effect of amino acid at the beta 6 position on surface hydrophobicity, stability, solubility, and the kinetics of polymerization of hemoglobin. Comparisons among Hb A (Glu beta 6), Hb C (Lys beta 6), Hb Machida (Gln beta 6), and Hb S (Val beta 6)

Surface hydrophobicity, stability, solubility, and kinetics of polymerization were studied using hemoglobins with four different amino acids at the beta 6 position: Hb A (Glu beta 6), Hb C (Lys beta 6), Hb Machida (Gln beta 6), and Hb S (Val beta 6). The surface hydrophobicity increased in the order of Hb C, Hb A, Hb Machida, and Hb S, coinciding with the hydrophobicity of the amino acid at the beta 6 position. Solubility of the oxy-form of these hemoglobins decreased in relation to increases in their surface hydrophobicity, suggesting that the solubility is controlled by the strength of hydrophobicity of the amino acid at the beta 6 position. The solubility of the oxy-form of these hemoglobins is always higher than that of the deoxy-form. There is a similar linear relationship between the solubility and surface hydrophobicity among deoxyhemoglobins A, C, and Machida. However, the solubility of deoxy-Hb S deviated significantly from the expected value, indicating that the extremely low solubility of deoxy-Hb S is not directly related to the hydrophobicity of the beta 6 valine. Kinetic studies on the polymerization of deoxy-Hb Machida revealed a distinct delay time prior to polymerization. This confirms our previous hypothesis that beta 6 valine is not responsible for the delay time prior to gelation. The kinetics of the polymerization of 1:1 mixtures of sickle and non-sickle hemoglobins were similar to those of pure Hb S, suggesting that only one of the two beta 6 valines is involved in an intermolecular contact. In mixtures of equal amounts of Hb S and Hb A, Hb C, or Hb Machida, half of the asymmetrical AS, SC, and S-Machida hybrid hemoglobins behaved like Hb S during nucleation, while the other half behaved like the non-sickle hemoglobin.     

Role of the hinge protein in the electron transfer between cardiac cytochrome c1 and c. Equilibrium constants and kinetic probes

A role of the hinge protein is studied in the electron transfer reaction between cytochromes c1 and c, using highly purified "one-band" cytochrome c1 and "two-band" cytochrome c1. The results show that the hinge protein (Hp), which is essential for a stable ionic strength-sensitive c1-Hp-c complex, seems to play a certain role in electron transfer between cytochromes c1 and c; Keq for electron transfer reaction between cytochromes c1 and c in the presence of the hinge protein is found to be about 40% higher than that in the absence of the hinge protein at low ionic strength, but no difference exists at high ionic strength. We propose a hypothesis that the hinge protein may function as regulator for the electron transfer reaction between cytochromes c1 and c, and this may be at least one of the roles of the hinge protein in mitochondria.     

Effects of sodium butyrate on human colonic adenocarcinoma cells. Induction of placental-like alkaline phosphatase

We have examined the effects of the "differentiating agent," sodium butyrate, on the induction of alkaline phosphatase in human colonic tumor cell line LS174T. Culture of these cells in the presence of 2 mM butyrate caused this activity to increase from less than 0.0001 unit/mg of protein to greater than 0.7 unit/mg of protein over an 8-day period. This induction proceeded in a nonlinear fashion with a lag time of 2-3 days occurring before enzymatic activity began to rise. These increases in activity were accompanied by elevations in the content of a placental-like isozyme of alkaline phosphatase as demonstrated by "Western" immunoblots. Dome formation, indicative of differentiation in cultured cells, also required 3 days treatment with butyrate before becoming evident. The rate of biosynthesis of the enzyme, examined using metabolic labeling with L-[35S]methionine and immunoprecipitation, was found to increase continuously between days 2 and 6 of butyrate treatment. "Northern" blot analysis indicated that treatment of these cells with butyrate caused greater than 20-fold induction of a 2700-base mRNA that hybridized to a cDNA probe for placental alkaline phosphatase. The mRNA for alkaline phosphatase produced by these cells upon butyrate treatment was approximately 300-400 bases smaller than the mRNA for alkaline phosphatase found in placenta. Human small intestine also contained two mRNAs that hybridized relatively weakly with the placental alkaline phosphatase probe. These results indicate that a placental alkaline phosphatase-like protein and mRNA are induced by butyrate in LS174T cells with a time course consistent with cellular differentiation preceding induction.     

Lipopeptides of the N-terminus of Escherichia coli lipoprotein: synthesis, mitogenicity and properties in monolayer experiments

The N-terminal part of the lipoprotein from the outer membrane of Escherichia coli, tripalmitoyl-S-glyceryl-L-Cys-Ser and analogs with longer sequences, are polyclonal activators for B-lymphocytes. Triple-chain lipopeptides also constitute efficient low-molecular-weight carrier/adjuvant systems, which can be linked to antigens to yield immunogens for antibody production without further additives. This is the first report of monolayer experiments with chemically well defined, synthetic lipopeptide mitogens with the composition of the N-terminus of an important bacterial membrane protein. Various derivatives of the lipoprotein N-terminus were synthesized. These lipopeptides differed in the length of the peptide moiety, the number of fatty acid residues, and protective groups. In order to obtain the surface areas for the lipopeptides in isotherms and hysteresis isotherms, monolayer experiments with a computer-controlled film balance were performed. To get some information about the interaction of these compounds with typical membrane lipids mixed monolayers were formed from triple-chain lipopeptides with dipalmitoylphosphatidylcholine and cholesterol. A comparison of the mitogenic response of the compounds was made in an in vitro system with B-lymphocytes from Balb/c mice.     

Feedback optimization of fed-batch fermentation

The problem of feedback optimization of the feed rate for fed-batch fermentation processes is formulated in the framework of singular control theory and switching hypersurfaces. Using four differential balance equations that describe a general class of fedbatch processes and a general objective function to be minimized, it is shown that under certain restrictions the feedback optimization of the feed rate can be realized as a nonlinear function of the state variables, such as the concentrations of cell mass, substrate and product, and the fermentor volume. The restrictions on the initial conditions, the fermentation kinetics and the objective function, that are needed for realization of the feedback optimization, are provided. Fed-batch fermentation models of lysine and alcohol are used to construct switching curves and to illustrate the feedback optimization of the feed flow rates.     

Incorporation of measured photosynthetic rate in a mathematical model for calculation of non-structural saccharide concentration

A simple mathematical model for calculating the concentration of mobile carbon skeletons in the shoot of soya bean plants [Glycine max (L.) Merrill cv. Ransom] was built to examine the suitability of measured net photosynthetic rates (PN) for calculation of saccharide flux into the plant. The results suggest that either measurement of instantaneous PN overestimated saccharide influx or respiration rates utilized in the model were underestimated. If neither of these is the case, end-product inhibition of photosynthesis or waste respiration through the alternative pathway should be included in modelling of CH2O influx or efflux; and even if either of these is the case, the model output at a low coefficient of leaf activity indicates that PN still may be controlled by either end-product inhibition or alternative respiration.